linux.git/include/scsi, branch v4.16-rc2

Merge tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-02-03T21:07:56+00:00

Pull second set of SCSI updates from James Bottomley:
 "This is a set of three patches that depended on mq and zone changes in
  the block tree (now upstream)"

* tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Remove zone write locking
  scsi: sd_zbc: Initialize device request queue zoned data
  scsi: scsi-mq-debugfs: Show more information

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2018-01-31T20:05:10+00:00

Pull RDMA subsystem updates from Jason Gunthorpe:
 "Overall this cycle did not have any major excitement, and did not
  require any shared branch with netdev.

  Lots of driver updates, particularly of the scale-up and performance
  variety. The largest body of core work was Parav's patches fixing and
  restructing some of the core code to make way for future RDMA
  containerization.

  Summary:

   - misc small driver fixups to
     bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes

   - several major feature adds to bnxt_re driver: SRIOV VF RoCE
     support, HugePages support, extended hardware stats support, and
     SRQ support

   - a notable number of fixes to the i40iw driver from debugging scale
     up testing

   - more work to enable the new hip08 chip in the hns driver

   - misc small ULP fixups to srp/srpt//ipoib

   - preparation for srp initiator and target to support the RDMA-CM
     protocol for connections

   - add RDMA-CM support to srp initiator, srp target is still a WIP

   - fixes for a couple of places where ipoib could spam the dmesg log

   - fix encode/decode of FDR/EDR data rates in the core

   - many patches from Parav with ongoing work to clean up
     inconsistencies and bugs in RoCE support around the rdma_cm

   - mlx5 driver support for the userspace features 'thread domain',
     'wallclock timestamps' and 'DV Direct Connected transport'. Support
     for the firmware dual port rocee capability

   - core support for more than 32 rdma devices in the char dev
     allocation

   - kernel doc updates from Randy Dunlap

   - new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'

   - one minor change to the kobject code acked by Greg KH"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits)
  RDMA/nldev: Provide detailed QP information
  RDMA/nldev: Provide global resource utilization
  RDMA/core: Add resource tracking for create and destroy PDs
  RDMA/core: Add resource tracking for create and destroy CQs
  RDMA/core: Add resource tracking for create and destroy QPs
  RDMA/restrack: Add general infrastructure to track RDMA resources
  RDMA/core: Save kernel caller name when creating PD and CQ objects
  RDMA/core: Use the MODNAME instead of the function name for pd callers
  RDMA: Move enum ib_cq_creation_flags to uapi headers
  IB/rxe: Change RDMA_RXE kconfig to use select
  IB/qib: remove qib_keys.c
  IB/mthca: remove mthca_user.h
  RDMA/cm: Fix access to uninitialized variable
  RDMA/cma: Use existing netif_is_bond_master function
  IB/core: Avoid SGID attributes query while converting GID from OPA to IB
  RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
  IB/umad: Fix use of unprotected device pointer
  IB/iser: Combine substrings for three messages
  IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
  IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-01-31T19:23:28+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual driver suspects: arcmsr,
  scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
  hisi_sas.

  We also have a rework of the libsas hotplug handling to make it more
  robust, a slew of 32 bit time conversions and fixes, and a host of the
  usual minor updates and style changes. The biggest potential for
  regressions is the libsas hotplug changes, but so far they seem stable
  under testing"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits)
  scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
  scsi: arcmsr: avoid do_gettimeofday
  scsi: core: Add VENDOR_SPECIFIC sense code definitions
  scsi: qedi: Drop cqe response during connection recovery
  scsi: fas216: fix sense buffer initialization
  scsi: ibmvfc: Remove unneeded semicolons
  scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
  scsi: hisi_sas: directly attached disk LED feature for v2 hw
  scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
  scsi: megaraid_sas: NVMe passthrough command support
  scsi: megaraid: use ktime_get_real for firmware time
  scsi: fnic: use 64-bit timestamps
  scsi: qedf: Fix error return code in __qedf_probe()
  scsi: devinfo: fix format of the device list
  scsi: qla2xxx: Update driver version to 10.00.00.05-k
  scsi: qla2xxx: Add XCB counters to debugfs
  scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
  scsi: qla2xxx: Fix warning during port_name debug print
  scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  ...

Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

2018-01-30T16:30:00+00:00

To resolve conflicts in:
 drivers/infiniband/hw/mlx5/main.c
 drivers/infiniband/hw/mlx5/qp.c

From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.

Signed-off-by: Jason Gunthorpe

IB/srp: Add RDMA/CM support

2018-01-23T16:35:04+00:00

Since the SRP_LOGIN_REQ defined in the SRP standard is larger than
what fits in the RDMA/CM login request private data, introduce a new
login request format for the RDMA/CM.

Note: since srp_daemon and ibsrpdm rely on the subnet manager and
since there is no equivalent of the IB subnet manager in non-IB
networks, login has to be performed manually for non-IB networks.

Signed-off-by: Bart Van Assche 
Signed-off-by: Doug Ledford

scsi: core: Add VENDOR_SPECIFIC sense code definitions

2018-01-23T01:04:02+00:00

Some older devices will return vendor specific sense codes, so we should
be adding a definition for it.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi: libsas: direct call probe and destruct

2018-01-11T04:24:02+00:00

In commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery
competing with ata error handling") introduced disco mutex to prevent
rediscovery competing with ata error handling and put the whole
revalidation in the mutex. But the rphy add/remove needs to wait for the
error handling which also grabs the disco mutex. This may leads to dead
lock.So the probe and destruct event were introduce to do the rphy
add/remove asynchronously and out of the lock.

The asynchronously processed workers makes the whole discovery process
not atomic, the other events may interrupt the process. For example,
if a loss of signal event inserted before the probe event, the
sas_deform_port() is called and the port will be deleted.

And sas_port_delete() may run before the destruct event, but the
port-x:x is the top parent of end device or expander. This leads to
a kernel WARNING such as:

[   82.042979] sysfs group 'power' not found for kobject 'phy-1:0:22'
[   82.042983] ------------[ cut here ]------------
[   82.042986] WARNING: CPU: 54 PID: 1714 at fs/sysfs/group.c:237
sysfs_remove_group+0x94/0xa0
[   82.043059] Call trace:
[   82.043082] [] sysfs_remove_group+0x94/0xa0
[   82.043085] [] dpm_sysfs_remove+0x60/0x70
[   82.043086] [] device_del+0x138/0x308
[   82.043089] [] sas_phy_delete+0x38/0x60
[   82.043091] [] do_sas_phy_delete+0x6c/0x80
[   82.043093] [] device_for_each_child+0x58/0xa0
[   82.043095] [] sas_remove_children+0x40/0x50
[   82.043100] [] sas_destruct_devices+0x64/0xa0
[   82.043102] [] process_one_work+0x1fc/0x4b0
[   82.043104] [] worker_thread+0x50/0x490
[   82.043105] [] kthread+0xfc/0x128
[   82.043107] [] ret_from_fork+0x10/0x50

Make probe and destruct a direct call in the disco and revalidate function,
but put them outside the lock. The whole discovery or revalidate won't
be interrupted by other events. And the DISCE_PROBE and DISCE_DESTRUCT
event are deleted as a result of the direct call.

Introduce a new list to destruct the sas_port and put the port delete after
the destruct. This makes sure the right order of destroying the sysfs
kobject and fix the warning above.

In sas_ex_revalidate_domain() have a loop to find all broadcasted
device, and sometimes we have a chance to find the same expander twice.
Because the sas_port will be deleted at the end of the whole revalidate
process, sas_port with the same name cannot be added before this.
Otherwise the sysfs will complain of creating duplicate filename. Since
the LLDD will send broadcast for every device change, we can only
process one expander's revalidation.

[mkp: kbuild test robot warning]

Signed-off-by: Jason Yan 
CC: John Garry 
CC: Johannes Thumshirn 
CC: Ewan Milne 
CC: Christoph Hellwig 
CC: Tomas Henzl 
CC: Dan Williams 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen

scsi: sd: Remove zone write locking

2018-01-09T03:27:32+00:00

The block layer now handles zone write locking.

[mkp: removed SCMD_ZONE_WRITE_LOCK reference in scsi_debugfs]

Signed-off-by: Damien Le Moal 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Martin K. Petersen

scsi: libsas: Use new workqueue to run sas event and disco event

2018-01-09T02:59:28+00:00

Now all libsas works are queued to scsi host workqueue, include sas
event work post by LLDD and sas discovery work, and a sas hotplug flow
may be divided into several works, e.g libsas receive a
PORTE_BYTES_DMAED event, currently we process it as following steps:

sas_form_port  --- run in work in shost workq
	sas_discover_domain  --- run in another work in shost workq
		...
		sas_probe_devices  --- run in new work in shost workq
We found during hot-add a device, libsas may need run several
works in same workqueue to add device in system, the process is
not atomic, it may interrupt by other sas event works, like
PHYE_LOSS_OF_SIGNAL.

This patch is preparation of execute libsas sas event in sync. We need
to use different workqueue to run sas event and disco event. Otherwise
the work will be blocked for waiting another chained work in the same
workqueue.

Signed-off-by: Yijing Wang 
CC: John Garry 
CC: Johannes Thumshirn 
CC: Ewan Milne 
CC: Christoph Hellwig 
CC: Tomas Henzl 
CC: Dan Williams 
Signed-off-by: Jason Yan 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen

scsi: libsas: make the event threshold configurable

2018-01-09T02:59:28+00:00

Add a sysfs attr that LLDD can configure it for every host. We made an
example in hisi_sas. Other LLDDs using libsas can implement it if they
want.

Suggested-by: Hannes Reinecke 
Signed-off-by: Jason Yan 
CC: John Garry 
CC: Johannes Thumshirn 
CC: Ewan Milne 
CC: Christoph Hellwig 
CC: Tomas Henzl 
CC: Dan Williams 
Acked-by: John Garry  #for hisi_sas part
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen