<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/include/net, branch v6.9-rc5</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>net/sched: Fix mirred deadlock on device recursion</title>
<updated>2024-04-18T01:22:52+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2024-04-15T21:07:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0f022d32c3eca477fbf79a205243a6123ed0fe11'/>
<id>0f022d32c3eca477fbf79a205243a6123ed0fe11</id>
<content type='text'>
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.

[..... other info removed for brevity....]
[   82.890906]
[   82.890906] ============================================
[   82.890906] WARNING: possible recursive locking detected
[   82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G        W
[   82.890906] --------------------------------------------
[   82.890906] ping/418 is trying to acquire lock:
[   82.890906] ffff888006994110 (&amp;sch-&gt;q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[   82.890906]
[   82.890906] but task is already holding lock:
[   82.890906] ffff888006994110 (&amp;sch-&gt;q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[   82.890906]
[   82.890906] other info that might help us debug this:
[   82.890906]  Possible unsafe locking scenario:
[   82.890906]
[   82.890906]        CPU0
[   82.890906]        ----
[   82.890906]   lock(&amp;sch-&gt;q.lock);
[   82.890906]   lock(&amp;sch-&gt;q.lock);
[   82.890906]
[   82.890906]  *** DEADLOCK ***
[   82.890906]
[..... other info removed for brevity....]

Example setup (eth0-&gt;eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth0

Another example(eth0-&gt;eth1-&gt;eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth1

tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth0

We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.

Reported-by: Mingshuai Ren &lt;renmingshuai@huawei.com&gt;
Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/
Fixes: 3bcb846ca4cf ("net: get rid of spin_trylock() in net_tx_action()")
Fixes: e578d9c02587 ("net: sched: use counter to break reclassify loops")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reviewed-by: Victor Nogueira &lt;victor@mojatatu.com&gt;
Reviewed-by: Pedro Tammela &lt;pctammela@mojatatu.com&gt;
Tested-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Acked-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.

[..... other info removed for brevity....]
[   82.890906]
[   82.890906] ============================================
[   82.890906] WARNING: possible recursive locking detected
[   82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G        W
[   82.890906] --------------------------------------------
[   82.890906] ping/418 is trying to acquire lock:
[   82.890906] ffff888006994110 (&amp;sch-&gt;q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[   82.890906]
[   82.890906] but task is already holding lock:
[   82.890906] ffff888006994110 (&amp;sch-&gt;q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[   82.890906]
[   82.890906] other info that might help us debug this:
[   82.890906]  Possible unsafe locking scenario:
[   82.890906]
[   82.890906]        CPU0
[   82.890906]        ----
[   82.890906]   lock(&amp;sch-&gt;q.lock);
[   82.890906]   lock(&amp;sch-&gt;q.lock);
[   82.890906]
[   82.890906]  *** DEADLOCK ***
[   82.890906]
[..... other info removed for brevity....]

Example setup (eth0-&gt;eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth0

Another example(eth0-&gt;eth1-&gt;eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth1

tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth0

We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.

Reported-by: Mingshuai Ren &lt;renmingshuai@huawei.com&gt;
Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/
Fixes: 3bcb846ca4cf ("net: get rid of spin_trylock() in net_tx_action()")
Fixes: e578d9c02587 ("net: sched: use counter to break reclassify loops")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reviewed-by: Victor Nogueira &lt;victor@mojatatu.com&gt;
Reviewed-by: Pedro Tammela &lt;pctammela@mojatatu.com&gt;
Tested-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Acked-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'nf-24-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf</title>
<updated>2024-04-12T12:02:13+00:00</updated>
<author>
<name>David S. Miller</name>
<email>davem@davemloft.net</email>
</author>
<published>2024-04-12T12:02:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=90be7a5ce0e5faec62782c8af37ad4ea0b9ecd40'/>
<id>90be7a5ce0e5faec62782c8af37ad4ea0b9ecd40</id>
<content type='text'>
netfilter pull request 24-04-11

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patches #1 and #2 add missing rcu read side lock when iterating over
expression and object type list which could race with module removal.

Patch #3 prevents promisc packet from visiting the bridge/input hook
	 to amend a recent fix to address conntrack confirmation race
	 in br_netfilter and nf_conntrack_bridge.

Patch #4 adds and uses iterate decorator type to fetch the current
	 pipapo set backend datastructure view when netlink dumps the
	 set elements.

Patch #5 fixes removal of duplicate elements in the pipapo set backend.

Patch #6 flowtable validates pppoe header before accessing it.

Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup
         fails and pppoe packets follow classic path.
====================

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
netfilter pull request 24-04-11

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patches #1 and #2 add missing rcu read side lock when iterating over
expression and object type list which could race with module removal.

Patch #3 prevents promisc packet from visiting the bridge/input hook
	 to amend a recent fix to address conntrack confirmation race
	 in br_netfilter and nf_conntrack_bridge.

Patch #4 adds and uses iterate decorator type to fetch the current
	 pipapo set backend datastructure view when netlink dumps the
	 set elements.

Patch #5 fixes removal of duplicate elements in the pipapo set backend.

Patch #6 flowtable validates pppoe header before accessing it.

Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup
         fails and pppoe packets follow classic path.
====================

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: flowtable: validate pppoe header</title>
<updated>2024-04-11T10:13:11+00:00</updated>
<author>
<name>Pablo Neira Ayuso</name>
<email>pablo@netfilter.org</email>
</author>
<published>2024-04-09T11:47:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=87b3593bed1868b2d9fe096c01bcdf0ea86cbebf'/>
<id>87b3593bed1868b2d9fe096c01bcdf0ea86cbebf</id>
<content type='text'>
Ensure there is sufficient room to access the protocol field of the
PPPoe header. Validate it once before the flowtable lookup, then use a
helper function to access protocol field.

Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Ensure there is sufficient room to access the protocol field of the
PPPoe header. Validate it once before the flowtable lookup, then use a
helper function to access protocol field.

Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: nft_set_pipapo: walk over current view on netlink dump</title>
<updated>2024-04-11T10:10:03+00:00</updated>
<author>
<name>Pablo Neira Ayuso</name>
<email>pablo@netfilter.org</email>
</author>
<published>2024-04-10T16:50:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=29b359cf6d95fd60730533f7f10464e95bd17c73'/>
<id>29b359cf6d95fd60730533f7f10464e95bd17c73</id>
<content type='text'>
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.

Based on patch from Florian Westphal.

Fixes: 2b84e215f874 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.

Based on patch from Florian Westphal.

Fixes: 2b84e215f874 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: SCO: Fix not validating setsockopt user input</title>
<updated>2024-04-10T19:03:46+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2024-04-05T19:41:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=51eda36d33e43201e7a4fd35232e069b2c850b01'/>
<id>51eda36d33e43201e7a4fd35232e069b2c850b01</id>
<content type='text'>
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578

Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578

Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr</title>
<updated>2024-04-10T00:09:05+00:00</updated>
<author>
<name>Jiri Benc</name>
<email>jbenc@redhat.com</email>
</author>
<published>2024-04-08T14:18:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7633c4da919ad51164acbf1aa322cc1a3ead6129'/>
<id>7633c4da919ad51164acbf1aa322cc1a3ead6129</id>
<content type='text'>
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it
still means hlist_for_each_entry_rcu can return an item that got removed
from the list. The memory itself of such item is not freed thanks to RCU
but nothing guarantees the actual content of the memory is sane.

In particular, the reference count can be zero. This can happen if
ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry
from inet6_addr_lst (hlist_del_init_rcu(&amp;ifp-&gt;addr_lst)) and drops all
references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough
timing, this can happen:

1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry.

2. Then, the whole ipv6_del_addr is executed for the given entry. The
   reference count drops to zero and kfree_rcu is scheduled.

3. ipv6_get_ifaddr continues and tries to increments the reference count
   (in6_ifa_hold).

4. The rcu is unlocked and the entry is freed.

5. The freed entry is returned.

Prevent increasing of the reference count in such case. The name
in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe.

[   41.506330] refcount_t: addition on 0; use-after-free.
[   41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130
[   41.507413] Modules linked in: veth bridge stp llc
[   41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14
[   41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[   41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130
[   41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 &lt;0f&gt; 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff
[   41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282
[   41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000
[   41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900
[   41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff
[   41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000
[   41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48
[   41.514086] FS:  00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000
[   41.514726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0
[   41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   41.516799] Call Trace:
[   41.517037]  &lt;TASK&gt;
[   41.517249]  ? __warn+0x7b/0x120
[   41.517535]  ? refcount_warn_saturate+0xa5/0x130
[   41.517923]  ? report_bug+0x164/0x190
[   41.518240]  ? handle_bug+0x3d/0x70
[   41.518541]  ? exc_invalid_op+0x17/0x70
[   41.520972]  ? asm_exc_invalid_op+0x1a/0x20
[   41.521325]  ? refcount_warn_saturate+0xa5/0x130
[   41.521708]  ipv6_get_ifaddr+0xda/0xe0
[   41.522035]  inet6_rtm_getaddr+0x342/0x3f0
[   41.522376]  ? __pfx_inet6_rtm_getaddr+0x10/0x10
[   41.522758]  rtnetlink_rcv_msg+0x334/0x3d0
[   41.523102]  ? netlink_unicast+0x30f/0x390
[   41.523445]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[   41.523832]  netlink_rcv_skb+0x53/0x100
[   41.524157]  netlink_unicast+0x23b/0x390
[   41.524484]  netlink_sendmsg+0x1f2/0x440
[   41.524826]  __sys_sendto+0x1d8/0x1f0
[   41.525145]  __x64_sys_sendto+0x1f/0x30
[   41.525467]  do_syscall_64+0xa5/0x1b0
[   41.525794]  entry_SYSCALL_64_after_hwframe+0x72/0x7a
[   41.526213] RIP: 0033:0x7fbc4cfcea9a
[   41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 &lt;48&gt; 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[   41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a
[   41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005
[   41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c
[   41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b
[   41.531573]  &lt;/TASK&gt;

Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU")
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Jiri Benc &lt;jbenc@redhat.com&gt;
Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it
still means hlist_for_each_entry_rcu can return an item that got removed
from the list. The memory itself of such item is not freed thanks to RCU
but nothing guarantees the actual content of the memory is sane.

In particular, the reference count can be zero. This can happen if
ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry
from inet6_addr_lst (hlist_del_init_rcu(&amp;ifp-&gt;addr_lst)) and drops all
references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough
timing, this can happen:

1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry.

2. Then, the whole ipv6_del_addr is executed for the given entry. The
   reference count drops to zero and kfree_rcu is scheduled.

3. ipv6_get_ifaddr continues and tries to increments the reference count
   (in6_ifa_hold).

4. The rcu is unlocked and the entry is freed.

5. The freed entry is returned.

Prevent increasing of the reference count in such case. The name
in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe.

[   41.506330] refcount_t: addition on 0; use-after-free.
[   41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130
[   41.507413] Modules linked in: veth bridge stp llc
[   41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14
[   41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[   41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130
[   41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 &lt;0f&gt; 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff
[   41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282
[   41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000
[   41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900
[   41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff
[   41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000
[   41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48
[   41.514086] FS:  00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000
[   41.514726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0
[   41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   41.516799] Call Trace:
[   41.517037]  &lt;TASK&gt;
[   41.517249]  ? __warn+0x7b/0x120
[   41.517535]  ? refcount_warn_saturate+0xa5/0x130
[   41.517923]  ? report_bug+0x164/0x190
[   41.518240]  ? handle_bug+0x3d/0x70
[   41.518541]  ? exc_invalid_op+0x17/0x70
[   41.520972]  ? asm_exc_invalid_op+0x1a/0x20
[   41.521325]  ? refcount_warn_saturate+0xa5/0x130
[   41.521708]  ipv6_get_ifaddr+0xda/0xe0
[   41.522035]  inet6_rtm_getaddr+0x342/0x3f0
[   41.522376]  ? __pfx_inet6_rtm_getaddr+0x10/0x10
[   41.522758]  rtnetlink_rcv_msg+0x334/0x3d0
[   41.523102]  ? netlink_unicast+0x30f/0x390
[   41.523445]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[   41.523832]  netlink_rcv_skb+0x53/0x100
[   41.524157]  netlink_unicast+0x23b/0x390
[   41.524484]  netlink_sendmsg+0x1f2/0x440
[   41.524826]  __sys_sendto+0x1d8/0x1f0
[   41.525145]  __x64_sys_sendto+0x1f/0x30
[   41.525467]  do_syscall_64+0xa5/0x1b0
[   41.525794]  entry_SYSCALL_64_after_hwframe+0x72/0x7a
[   41.526213] RIP: 0033:0x7fbc4cfcea9a
[   41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 &lt;48&gt; 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[   41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a
[   41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005
[   41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c
[   41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b
[   41.531573]  &lt;/TASK&gt;

Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU")
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Jiri Benc &lt;jbenc@redhat.com&gt;
Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>geneve: fix header validation in geneve[6]_xmit_skb</title>
<updated>2024-04-08T10:51:04+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2024-04-05T10:30:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d8a6213d70accb403b82924a1c229e733433a5ef'/>
<id>d8a6213d70accb403b82924a1c229e733433a5ef</id>
<content type='text'>
syzbot is able to trigger an uninit-value in geneve_xmit() [1]

Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb-&gt;protocol.

If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb-&gt;protocol,
pskb_inet_may_pull() does nothing at all.

If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.

Add skb_vlan_inet_prepare() to perform a complete mac validation.

Use this in geneve for the moment, I suspect we need to adopt this
more broadly.

v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
   - Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/

v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/

[1]

BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
 BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  geneve_xmit_skb drivers/net/geneve.c:910 [inline]
  geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  __netdev_start_xmit include/linux/netdevice.h:4903 [inline]
  netdev_start_xmit include/linux/netdevice.h:4917 [inline]
  xmit_one net/core/dev.c:3531 [inline]
  dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
  __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
  dev_queue_xmit include/linux/netdevice.h:3091 [inline]
  packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3804 [inline]
  slab_alloc_node mm/slub.c:3845 [inline]
  kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
  __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
  alloc_skb include/linux/skbuff.h:1318 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Phillip Potter &lt;phil@philpotter.co.uk&gt;
Cc: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Reviewed-by: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Reviewed-by: Phillip Potter &lt;phil@philpotter.co.uk&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
syzbot is able to trigger an uninit-value in geneve_xmit() [1]

Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb-&gt;protocol.

If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb-&gt;protocol,
pskb_inet_may_pull() does nothing at all.

If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.

Add skb_vlan_inet_prepare() to perform a complete mac validation.

Use this in geneve for the moment, I suspect we need to adopt this
more broadly.

v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
   - Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/

v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/

[1]

BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
 BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  geneve_xmit_skb drivers/net/geneve.c:910 [inline]
  geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  __netdev_start_xmit include/linux/netdevice.h:4903 [inline]
  netdev_start_xmit include/linux/netdevice.h:4917 [inline]
  xmit_one net/core/dev.c:3531 [inline]
  dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
  __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
  dev_queue_xmit include/linux/netdevice.h:3091 [inline]
  packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3804 [inline]
  slab_alloc_node mm/slub.c:3845 [inline]
  kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
  __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
  alloc_skb include/linux/skbuff.h:1318 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Phillip Potter &lt;phil@philpotter.co.uk&gt;
Cc: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Reviewed-by: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Reviewed-by: Phillip Potter &lt;phil@philpotter.co.uk&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: mana: Fix Rx DMA datasize and skb_over_panic</title>
<updated>2024-04-04T02:32:03+00:00</updated>
<author>
<name>Haiyang Zhang</name>
<email>haiyangz@microsoft.com</email>
</author>
<published>2024-04-02T19:48:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c0de6ab920aafb56feab56058e46b688e694a246'/>
<id>c0de6ab920aafb56feab56058e46b688e694a246</id>
<content type='text'>
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.

Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:&lt;NULL&gt;
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389]  &lt;IRQ&gt;
[ 5325.315794]  ? skb_panic+0x4f/0x60
[ 5325.317457]  ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490]  ? skb_panic+0x4f/0x60
[ 5325.321161]  skb_put+0x4e/0x50
[ 5325.322670]  mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578]  __napi_poll+0x33/0x1e0
[ 5325.326328]  net_rx_action+0x12e/0x280

As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.

Cc: stable@vger.kernel.org
Fixes: 2fbbd712baf1 ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang &lt;haiyangz@microsoft.com&gt;
Reviewed-by: Dexuan Cui &lt;decui@microsoft.com&gt;
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.

Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:&lt;NULL&gt;
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389]  &lt;IRQ&gt;
[ 5325.315794]  ? skb_panic+0x4f/0x60
[ 5325.317457]  ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490]  ? skb_panic+0x4f/0x60
[ 5325.321161]  skb_put+0x4e/0x50
[ 5325.322670]  mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578]  __napi_poll+0x33/0x1e0
[ 5325.326328]  net_rx_action+0x12e/0x280

As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.

Cc: stable@vger.kernel.org
Fixes: 2fbbd712baf1 ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang &lt;haiyangz@microsoft.com&gt;
Reviewed-by: Dexuan Cui &lt;decui@microsoft.com&gt;
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: add quirk for broken address properties</title>
<updated>2024-03-29T13:48:37+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan+linaro@kernel.org</email>
</author>
<published>2024-03-20T07:55:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=39646f29b100566451d37abc4cc8cdd583756dfe'/>
<id>39646f29b100566451d37abc4cc8cdd583756dfe</id>
<content type='text'>
Some Bluetooth controllers lack persistent storage for the device
address and instead one can be provided by the boot firmware using the
'local-bd-address' devicetree property.

The Bluetooth devicetree bindings clearly states that the address should
be specified in little-endian order, but due to a long-standing bug in
the Qualcomm driver which reversed the address some boot firmware has
been providing the address in big-endian order instead.

Add a new quirk that can be set on platforms with broken firmware and
use it to reverse the address when parsing the property so that the
underlying driver bug can be fixed.

Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org      # 5.1
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Some Bluetooth controllers lack persistent storage for the device
address and instead one can be provided by the boot firmware using the
'local-bd-address' devicetree property.

The Bluetooth devicetree bindings clearly states that the address should
be specified in little-endian order, but due to a long-standing bug in
the Qualcomm driver which reversed the address some boot firmware has
been providing the address in big-endian order instead.

Add a new quirk that can be set on platforms with broken firmware and
use it to reverse the address when parsing the property so that the
underlying driver bug can be fixed.

Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org      # 5.1
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless</title>
<updated>2024-03-27T22:39:18+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2024-03-27T22:39:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=56d2f48ed8f857f2765575a6a25b9655765edd41'/>
<id>56d2f48ed8f857f2765575a6a25b9655765edd41</id>
<content type='text'>
Kalle Valo says:

====================
wireless fixes for v6.9-rc2

The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.

* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
  MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
  kunit: fix wireless test dependencies
  wifi: iwlwifi: mvm: include link ID when releasing frames
  wifi: iwlwifi: mvm: handle debugfs names more carefully
  wifi: iwlwifi: mvm: guard against invalid STA ID on removal
  wifi: iwlwifi: read txq-&gt;read_ptr under lock
  wifi: iwlwifi: fw: don't always use FW dump trig
  wifi: iwlwifi: mvm: rfi: fix potential response leaks
  wifi: mac80211: correctly set active links upon TTLM
  wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
  wifi: iwlwifi: mvm: consider having one active link
  wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
  wifi: mac80211: fix prep_connection error path
  wifi: cfg80211: fix rdev_dump_mpp() arguments order
  wifi: iwlwifi: mvm: disable MLO for the time being
  wifi: cfg80211: add a flag to disable wireless extensions
  wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
  wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
  wifi: mac80211: fix mlme_link_id_dbg()
  MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
  ...
====================

Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Kalle Valo says:

====================
wireless fixes for v6.9-rc2

The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.

* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
  MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
  kunit: fix wireless test dependencies
  wifi: iwlwifi: mvm: include link ID when releasing frames
  wifi: iwlwifi: mvm: handle debugfs names more carefully
  wifi: iwlwifi: mvm: guard against invalid STA ID on removal
  wifi: iwlwifi: read txq-&gt;read_ptr under lock
  wifi: iwlwifi: fw: don't always use FW dump trig
  wifi: iwlwifi: mvm: rfi: fix potential response leaks
  wifi: mac80211: correctly set active links upon TTLM
  wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
  wifi: iwlwifi: mvm: consider having one active link
  wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
  wifi: mac80211: fix prep_connection error path
  wifi: cfg80211: fix rdev_dump_mpp() arguments order
  wifi: iwlwifi: mvm: disable MLO for the time being
  wifi: cfg80211: add a flag to disable wireless extensions
  wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
  wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
  wifi: mac80211: fix mlme_link_id_dbg()
  MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
  ...
====================

Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
