linux.git/include/net, branch v5.15-rc2 Linux kernel source tree net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports 2021-09-15T22:09:46+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2021-09-14T13:47:26+00:00 a57d8c217aadac75530b8e7ffb3a3e1b7bfd0330 Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error messages appear: mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2 (and similarly for other ports) What happens is that DSA has a policy "even if there are bugs, let's at least not leak memory" and dsa_port_teardown() clears the dp->fdbs and dp->mdbs lists, which are supposed to be empty. But deleting that cleanup code, the warnings go away. => the FDB and MDB lists (used for refcounting on shared ports, aka CPU and DSA ports) will eventually be empty, but are not empty by the time we tear down those ports. Aka we are deleting them too soon. The addresses that DSA complains about are host-trapped addresses: the local addresses of the ports, and the MAC address of the bridge device. The problem is that offloading those entries happens from a deferred work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this races with the teardown of the CPU and DSA ports where the refcounting is kept. In fact, not only it races, but fundamentally speaking, if we iterate through the port list linearly, we might end up tearing down the shared ports even before we delete a DSA user port which has a bridge upper. So as it turns out, we need to first tear down the user ports (and the unused ones, for no better place of doing that), then the shared ports (the CPU and DSA ports). In between, we need to ensure that all work items scheduled by our switchdev handlers (which only run for user ports, hence the reason why we tear them down first) have finished. Fixes: 161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error
messages appear:

mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2

(and similarly for other ports)

What happens is that DSA has a policy "even if there are bugs, let's at
least not leak memory" and dsa_port_teardown() clears the dp->fdbs and
dp->mdbs lists, which are supposed to be empty.

But deleting that cleanup code, the warnings go away.

=> the FDB and MDB lists (used for refcounting on shared ports, aka CPU
and DSA ports) will eventually be empty, but are not empty by the time
we tear down those ports. Aka we are deleting them too soon.

The addresses that DSA complains about are host-trapped addresses: the
local addresses of the ports, and the MAC address of the bridge device.

The problem is that offloading those entries happens from a deferred
work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this
races with the teardown of the CPU and DSA ports where the refcounting
is kept.

In fact, not only it races, but fundamentally speaking, if we iterate
through the port list linearly, we might end up tearing down the shared
ports even before we delete a DSA user port which has a bridge upper.

So as it turns out, we need to first tear down the user ports (and the
unused ones, for no better place of doing that), then the shared ports
(the CPU and DSA ports). In between, we need to ensure that all work
items scheduled by our switchdev handlers (which only run for user
ports, hence the reason why we tear them down first) have finished.

Fixes: 161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
flow: fix object-size-mismatch warning in flowi{4,6}_to_flowi_common() 2021-09-02T10:44:19+00:00 Tetsuo Handa penguin-kernel@i-love.sakura.ne.jp 2021-09-02T05:36:17+00:00 b9edbfe1adecfc48fd11061dce68afb03d6adbdc Commit 3df98d79215ace13 ("lsm,selinux: pass flowi_common instead of flowi to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04. ================================================================================ UBSAN: object-size-mismatch in ./include/net/flow.h:197:33 member access within address ffffc9000109fbd8 with insufficient space for an object of type 'struct flowi' CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x103/0x171 ubsan_type_mismatch_common+0x1de/0x390 __ubsan_handle_type_mismatch_v1+0x41/0x50 udp_sendmsg+0xda2/0x1300 ? ip_skb_dst_mtu+0x1f0/0x1f0 ? sock_rps_record_flow+0xe/0x200 ? inet_send_prepare+0x2d/0x90 sock_sendmsg+0x49/0x80 ____sys_sendmsg+0x269/0x370 __sys_sendmsg+0x15e/0x1d0 ? syscall_enter_from_user_mode+0xf0/0x1b0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7081a50497 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497 RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28 R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c ================================================================================ I don't think we need to call flowi{4,6}_to_flowi() from these functions because the first member of "struct flowi4" and "struct flowi6" is struct flowi_common __fl_common; while the first member of "struct flowi" is union { struct flowi_common __fl_common; struct flowi4 ip4; struct flowi6 ip6; struct flowidn dn; } u; which should point to the same address without access to "struct flowi". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 
Commit 3df98d79215ace13 ("lsm,selinux: pass flowi_common instead of flowi
to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which
cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04.

 ================================================================================
 UBSAN: object-size-mismatch in ./include/net/flow.h:197:33
 member access within address ffffc9000109fbd8 with insufficient space
 for an object of type 'struct flowi'
 CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
 Call Trace:
  dump_stack_lvl+0x103/0x171
  ubsan_type_mismatch_common+0x1de/0x390
  __ubsan_handle_type_mismatch_v1+0x41/0x50
  udp_sendmsg+0xda2/0x1300
  ? ip_skb_dst_mtu+0x1f0/0x1f0
  ? sock_rps_record_flow+0xe/0x200
  ? inet_send_prepare+0x2d/0x90
  sock_sendmsg+0x49/0x80
  ____sys_sendmsg+0x269/0x370
  __sys_sendmsg+0x15e/0x1d0
  ? syscall_enter_from_user_mode+0xf0/0x1b0
  do_syscall_64+0x3d/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f7081a50497
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497
 RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c
 RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28
 R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c
 R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c
 ================================================================================

I don't think we need to call flowi{4,6}_to_flowi() from these functions
because the first member of "struct flowi4" and "struct flowi6" is

  struct flowi_common __fl_common;

while the first member of "struct flowi" is

  union {
    struct flowi_common __fl_common;
    struct flowi4       ip4;
    struct flowi6       ip6;
    struct flowidn      dn;
  } u;

which should point to the same address without access to "struct flowi".

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next 2021-08-30T23:42:47+00:00 Jakub Kicinski kuba@kernel.org 2021-08-30T23:42:46+00:00 19a31d79219cdd66484721f564ee68293dcc6c24 Daniel Borkmann says: ==================== bpf-next 2021-08-31 We've added 116 non-merge commits during the last 17 day(s) which contain a total of 126 files changed, 6813 insertions(+), 4027 deletions(-). The main changes are: 1) Add opaque bpf_cookie to perf link which the program can read out again, to be used in libbpf-based USDT library, from Andrii Nakryiko. 2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu. 3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang. 4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch to another congestion control algorithm during init, from Martin KaFai Lau. 5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima. 6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta. 7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT} progs, from Xu Liu and Stanislav Fomichev. 8) Support for __weak typed ksyms in libbpf, from Hao Luo. 9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky. 10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov. 11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann. 12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian, Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others. 13) Another big batch to revamp XDP samples in order to give them consistent look and feel, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits) MAINTAINERS: Remove self from powerpc BPF JIT selftests/bpf: Fix potential unreleased lock samples: bpf: Fix uninitialized variable in xdp_redirect_cpu selftests/bpf: Reduce more flakyness in sockmap_listen bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS bpf: selftests: Add dctcp fallback test bpf: selftests: Add connect_to_fd_opts to network_helpers bpf: selftests: Add sk_state to bpf_tcp_helpers.h bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt selftests: xsk: Preface options with opt selftests: xsk: Make enums lower case selftests: xsk: Generate packets from specification selftests: xsk: Generate packet directly in umem selftests: xsk: Simplify cleanup of ifobjects selftests: xsk: Decrease sending speed selftests: xsk: Validate tx stats on tx thread selftests: xsk: Simplify packet validation in xsk tests selftests: xsk: Rename worker_* functions that are not thread entry points selftests: xsk: Disassociate umem size with packets sent selftests: xsk: Remove end-of-test packet ... ==================== Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Daniel Borkmann says:

====================
bpf-next 2021-08-31

We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).

The main changes are:

1) Add opaque bpf_cookie to perf link which the program can read out again,
   to be used in libbpf-based USDT library, from Andrii Nakryiko.

2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.

3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.

4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
   to another congestion control algorithm during init, from Martin KaFai Lau.

5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.

6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.

7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
   progs, from Xu Liu and Stanislav Fomichev.

8) Support for __weak typed ksyms in libbpf, from Hao Luo.

9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.

10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.

11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.

12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
    Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.

13) Another big batch to revamp XDP samples in order to give them consistent look
    and feel, from Kumar Kartikeya Dwivedi.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
  MAINTAINERS: Remove self from powerpc BPF JIT
  selftests/bpf: Fix potential unreleased lock
  samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
  selftests/bpf: Reduce more flakyness in sockmap_listen
  bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
  bpf: selftests: Add dctcp fallback test
  bpf: selftests: Add connect_to_fd_opts to network_helpers
  bpf: selftests: Add sk_state to bpf_tcp_helpers.h
  bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
  selftests: xsk: Preface options with opt
  selftests: xsk: Make enums lower case
  selftests: xsk: Generate packets from specification
  selftests: xsk: Generate packet directly in umem
  selftests: xsk: Simplify cleanup of ifobjects
  selftests: xsk: Decrease sending speed
  selftests: xsk: Validate tx stats on tx thread
  selftests: xsk: Simplify packet validation in xsk tests
  selftests: xsk: Rename worker_* functions that are not thread entry points
  selftests: xsk: Disassociate umem size with packets sent
  selftests: xsk: Remove end-of-test packet
  ...
====================

Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sch_htb: Fix inconsistency when leaf qdisc creation fails 2021-08-30T23:33:59+00:00 Maxim Mikityanskiy maximmi@nvidia.com 2021-08-26T11:54:25+00:00 ca49bfd90a9dde175d2929dc1544b54841e33804 In HTB offload mode, qdiscs of leaf classes are grafted to netdev queues. sch_htb expects the dev_queue field of these qdiscs to point to the corresponding queues. However, qdisc creation may fail, and in that case noop_qdisc is used instead. Its dev_queue doesn't point to the right queue, so sch_htb can lose track of used netdev queues, which will cause internal inconsistencies. This commit fixes this bug by keeping track of the netdev queue inside struct htb_class. All reads of cl->leaf.q->dev_queue are replaced by the new field, the two values are synced on writes, and WARNs are added to assert equality of the two values. The driver API has changed: when TC_HTB_LEAF_DEL needs to move a queue, the driver used to pass the old and new queue IDs to sch_htb. Now that there is a new field (offload_queue) in struct htb_class that needs to be updated on this operation, the driver will pass the old class ID to sch_htb instead (it already knows the new class ID). Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20210826115425.1744053-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
In HTB offload mode, qdiscs of leaf classes are grafted to netdev
queues. sch_htb expects the dev_queue field of these qdiscs to point to
the corresponding queues. However, qdisc creation may fail, and in that
case noop_qdisc is used instead. Its dev_queue doesn't point to the
right queue, so sch_htb can lose track of used netdev queues, which will
cause internal inconsistencies.

This commit fixes this bug by keeping track of the netdev queue inside
struct htb_class. All reads of cl->leaf.q->dev_queue are replaced by the
new field, the two values are synced on writes, and WARNs are added to
assert equality of the two values.

The driver API has changed: when TC_HTB_LEAF_DEL needs to move a queue,
the driver used to pass the old and new queue IDs to sch_htb. Now that
there is a new field (offload_queue) in struct htb_class that needs to
be updated on this operation, the driver will pass the old class ID to
sch_htb instead (it already knows the new class ID).

Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210826115425.1744053-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next 2021-08-30T09:57:54+00:00 David S. Miller davem@davemloft.net 2021-08-30T09:57:54+00:00 9dfa859da0f5fe9dae4d2fca76c5c0272e43c702 Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Clean up and consolidate ct ecache infrastructure by merging ct and expect notifiers, from Florian Westphal. 2) Missing counters and timestamp in nfnetlink_queue and _log conntrack information. 3) Missing error check for xt_register_template() in iptables mangle, as a incremental fix for the previous pull request, also from Florian Westphal. 4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl to make sure existing netfilter rulesets do not break. There is a static key to disable the hooks by default. The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable impact in the seg6_input path for non-netfilter users: similar numbers with and without this patch. This is a sample of the perf report output: 11.67% kpktgend_0 [ipv6] [k] ipv6_get_saddr_eval 7.89% kpktgend_0 [ipv6] [k] __ipv6_addr_label 7.52% kpktgend_0 [ipv6] [k] __ipv6_dev_get_saddr 6.63% kpktgend_0 [kernel.vmlinux] [k] asm_exc_nmi 4.74% kpktgend_0 [ipv6] [k] fib6_node_lookup_1 3.48% kpktgend_0 [kernel.vmlinux] [k] pskb_expand_head 3.33% kpktgend_0 [ipv6] [k] ip6_rcv_core.isra.29 3.33% kpktgend_0 [ipv6] [k] seg6_do_srh_encap 2.53% kpktgend_0 [ipv6] [k] ipv6_dev_get_saddr 2.45% kpktgend_0 [ipv6] [k] fib6_table_lookup 2.24% kpktgend_0 [kernel.vmlinux] [k] ___cache_free 2.16% kpktgend_0 [ipv6] [k] ip6_pol_route 2.11% kpktgend_0 [kernel.vmlinux] [k] __ipv6_addr_type ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Clean up and consolidate ct ecache infrastructure by merging ct and
   expect notifiers, from Florian Westphal.

2) Missing counters and timestamp in nfnetlink_queue and _log conntrack
   information.

3) Missing error check for xt_register_template() in iptables mangle,
   as a incremental fix for the previous pull request, also from
   Florian Westphal.

4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from
   Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl
   to make sure existing netfilter rulesets do not break. There is
   a static key to disable the hooks by default.

   The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable
   impact in the seg6_input path for non-netfilter users: similar
   numbers with and without this patch.

   This is a sample of the perf report output:

    11.67%  kpktgend_0       [ipv6]                    [k] ipv6_get_saddr_eval
     7.89%  kpktgend_0       [ipv6]                    [k] __ipv6_addr_label
     7.52%  kpktgend_0       [ipv6]                    [k] __ipv6_dev_get_saddr
     6.63%  kpktgend_0       [kernel.vmlinux]          [k] asm_exc_nmi
     4.74%  kpktgend_0       [ipv6]                    [k] fib6_node_lookup_1
     3.48%  kpktgend_0       [kernel.vmlinux]          [k] pskb_expand_head
     3.33%  kpktgend_0       [ipv6]                    [k] ip6_rcv_core.isra.29
     3.33%  kpktgend_0       [ipv6]                    [k] seg6_do_srh_encap
     2.53%  kpktgend_0       [ipv6]                    [k] ipv6_dev_get_saddr
     2.45%  kpktgend_0       [ipv6]                    [k] fib6_table_lookup
     2.24%  kpktgend_0       [kernel.vmlinux]          [k] ___cache_free
     2.16%  kpktgend_0       [ipv6]                    [k] ip6_pol_route
     2.11%  kpktgend_0       [kernel.vmlinux]          [k] __ipv6_addr_type
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: add netfilter hooks to SRv6 data plane 2021-08-29T23:51:36+00:00 Ryoga Saito contact@proelbtn.com 2021-08-17T08:39:37+00:00 7a3f5b0de3647c854e34269c3332d7a1e902901a This patch introduces netfilter hooks for solving the problem that conntrack couldn't record both inner flows and outer flows. This patch also introduces a new sysctl toggle for enabling lightweight tunnel netfilter hooks. Signed-off-by: Ryoga Saito <contact@proelbtn.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
This patch introduces netfilter hooks for solving the problem that
conntrack couldn't record both inner flows and outer flows.

This patch also introduces a new sysctl toggle for enabling lightweight
tunnel netfilter hooks.

Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ipv6: add IFLA_INET6_RA_MTU to expose mtu value 2021-08-28T00:29:18+00:00 Rocco Yue rocco.yue@mediatek.com 2021-08-27T15:04:12+00:00 49b99da2c9ce13ffcd93fe3a0f5670791c1d76f7 The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu" file, which can temporarily record the mtu value of the last received RA message when the RA mtu value is lower than the interface mtu, but this proc has following limitations: (1) when the interface mtu (/sys/class/net/<iface>/mtu) is updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will be updated to the value of interface mtu; (2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect ipv6 connection, and not affect ipv4. Therefore, when the mtu option is carried in the RA message, there will be a problem that the user sometimes cannot obtain RA mtu value correctly by reading mtu6. After this patch set, if a RA message carries the mtu option, you can send a netlink msg which nlmsg_type is RTM_GETLINK, and then by parsing the attribute of IFLA_INET6_RA_MTU to get the mtu value carried in the RA message received on the inet6 device. In addition, you can also get a link notification when ra_mtu is updated so it doesn't have to poll. In this way, if the MTU values that the device receives from the network in the PCO IPv4 and the RA IPv6 procedures are different, the user can obtain the correct ipv6 ra_mtu value and compare the value of ra_mtu and ipv4 mtu, then the device can use the lower MTU value for both IPv4 and IPv6. Signed-off-by: Rocco Yue <rocco.yue@mediatek.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:

(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.

Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.

After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.

In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.

Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ 2021-08-27T10:16:29+00:00 David S. Miller davem@davemloft.net 2021-08-27T10:16:29+00:00 fe50893aa86eb9f1c6ccf2ceef274193b6313aad ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-08-27 1) Remove an unneeded extra variable in esp4 esp_ssg_unref. From Corey Minyard. 2) Add a configuration option to change the default behaviour to block traffic if there is no matching policy. Joint work with Christian Langrock and Antony Antony. 3) Fix a shift-out-of-bounce bug reported from syzbot. From Pavel Skripkin. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
ipsec-next

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2021-08-27

1) Remove an unneeded extra variable in esp4 esp_ssg_unref.
   From Corey Minyard.

2) Add a configuration option to change the default behaviour
   to block traffic if there is no matching policy.
   Joint work with Christian Langrock and Antony Antony.

3) Fix a shift-out-of-bounce bug reported from syzbot.
   From Pavel Skripkin.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-08-27T00:57:57+00:00 Jakub Kicinski kuba@kernel.org 2021-08-26T20:45:47+00:00 97c78d0af55fff206947a5f2b85b690b5acf28ce drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'mac80211-next-for-net-next-2021-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2021-08-26T09:47:43+00:00 David S. Miller davem@davemloft.net 2021-08-26T09:47:43+00:00 8b325d2a099e6fa0f3e1113fc1e7b590360594fa Johannes Berg says: ==================== A few more things: * Use correct DFS domain for self-managed devices * some preparations for transmit power element handling and other 6 GHz regulatory handling * TWT support in AP mode in mac80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Johannes Berg says:

====================
A few more things:
 * Use correct DFS domain for self-managed devices
 * some preparations for transmit power element handling
   and other 6 GHz regulatory handling
 * TWT support in AP mode in mac80211
====================

Signed-off-by: David S. Miller <davem@davemloft.net>