linux.git/include/net, branch v5.1-rc5

nfc: nci: Potential off by one in ->pipes[] array

2019-04-06T22:05:07+00:00

This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes")
where we changed NFC_HCI_MAX_PIPES from 127 to 128.

As the comment next to the define explains, the pipe identifier is 7
bits long.  The highest possible pipe is 127, but the number of possible
pipes is 128.  As the code is now, then there is potential for an
out of bounds array access:

    net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one?
    'ndev->hci_dev->pipes[pipe]' '0-127 == 127'

Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller

net: sched: introduce and use qdisc tree flush/purge helpers

2019-04-01T21:50:13+00:00

The same code to flush qdisc tree and purge the qdisc queue
is duplicated in many places and in most cases it does not
respect NOLOCK qdisc: the global backlog len is used and the
per CPU values are ignored.

This change addresses the above, factoring-out the relevant
code and using the helpers introduced by the previous patch
to fetch the correct backlog len.

Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

net: sched: introduce and use qstats read helpers

2019-04-01T21:50:13+00:00

Classful qdiscs can't access directly the child qdiscs backlog
length: if such qdisc is NOLOCK, per CPU values should be
accounted instead.

Most qdiscs no not respect the above. As a result, qstats fetching
for most classful qdisc is currently incorrect: if the child qdisc is
NOLOCK, it always reports 0 len backlog.

This change introduces a pair of helpers to safely fetch
both backlog and qlen and use them in stats class dumping
functions, fixing the above issue and cleaning a bit the code.

DRR needs also to access the child qdisc queue length, so it
needs custom handling.

Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

vrf: check accept_source_route on the original netdevice

2019-04-01T17:44:58+00:00

Configuration check to accept source route IP options should be made on
the incoming netdevice when the skb->dev is an l3mdev master. The route
lookup for the source route next hop also needs the incoming netdev.

v2->v3:
- Simplify by passing the original netdevice down the stack (per David
  Ahern).

Signed-off-by: Stephen Suryaputra 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

netns: provide pure entropy for net_hash_mix()

2019-03-29T00:00:45+00:00

net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)

I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.

Also provide entropy regardless of CONFIG_NET_NS.

Fixes: 0b4419162aa6 ("netns: introduce the net_hash_mix "salt" for hashes")
Signed-off-by: Eric Dumazet 
Reported-by: Amit Klein 
Reported-by: Benny Pinkas 
Cc: Pavel Emelyanov 
Signed-off-by: David S. Miller

net/sched: let actions use RCU to access 'goto_chain'

2019-03-21T20:26:42+00:00

use RCU when accessing the action chain, to avoid use after free in the
traffic path when 'goto chain' is replaced on existing TC actions (see
script below). Since the control action is read in the traffic path
without holding the action spinlock, we need to explicitly ensure that
a->goto_chain is not NULL before dereferencing (i.e it's not sufficient
to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL
dereferences in tcf_action_goto_chain_exec() when the following script:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto udp action pass index 4
 # tc filter add dev dd0 ingress protocol ip flower \
 > ip_proto udp action csum udp goto chain 42 index 66
 # tc chain del dev dd0 chain 42 ingress
 (start UDP traffic towards dd0)
 # tc action replace action csum udp pass index 66

was run repeatedly for several hours.

Suggested-by: Cong Wang 
Suggested-by: Vlad Buslov 
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

net/sched: don't dereference a->goto_chain to read the chain index

2019-03-21T20:26:42+00:00

callers of tcf_gact_goto_chain_index() can potentially read an old value
of the chain index, or even dereference a NULL 'goto_chain' pointer,
because 'goto_chain' and 'tcfa_action' are read in the traffic path
without caring of concurrent write in the control path. The most recent
value of chain index can be read also from a->tcfa_action (it's encoded
there together with TC_ACT_GOTO_CHAIN bits), so we don't really need to
dereference 'goto_chain': just read the chain id from the control action.

Fixes: e457d86ada27 ("net: sched: add couple of goto_chain helpers")
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

net/sched: prepare TC actions to properly validate the control action

2019-03-21T20:26:41+00:00

- pass a pointer to struct tcf_proto in each actions's init() handler,
  to allow validating the control action, checking whether the chain
  exists and (eventually) refcounting it.
- remove code that validates the control action after a successful call
  to the action's init() handler, and replace it with a test that forbids
  addition of actions having 'goto_chain' and NULL goto_chain pointer at
  the same time.
- add tcf_action_check_ctrlact(), that will validate the control action
  and eventually allocate the action 'goto_chain' within the init()
  handler.
- add tcf_action_set_ctrlact(), that will assign the control action and
  swap the current 'goto_chain' pointer with the new given one.

This disallows 'goto_chain' on actions that don't initialize it properly
in their init() handler, i.e. calling tcf_action_check_ctrlact() after
successful IDR reservation and then calling tcf_action_set_ctrlact()
to assign 'goto_chain' and 'tcf_action' consistently.

By doing this, the kernel does not leak anymore refcounts when a valid
'goto chain' handle is replaced in TC actions, causing kmemleak splats
like the following one:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto tcp action drop
 # tc chain add dev dd0 chain 43 ingress protocol ip flower \
 > ip_proto udp action drop
 # tc filter add dev dd0 ingress matchall \
 > action gact goto chain 42 index 66
 # tc filter replace dev dd0 ingress matchall \
 > action gact goto chain 43 index 66
 # echo scan >/sys/kernel/debug/kmemleak
 <...>
 unreferenced object 0xffff93c0ee09f000 (size 1024):
 comm "tc", pid 2565, jiffies 4295339808 (age 65.426s)
 hex dump (first 32 bytes):
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0
   [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0
   [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110
   [<000000006126a348>] netlink_unicast+0x1a0/0x250
   [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0
   [<00000000a25a2171>] sock_sendmsg+0x36/0x40
   [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0
   [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0
   [<000000007a6c61f9>] do_syscall_64+0x5b/0x180
   [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
   [<0000000013eaa334>] 0xffffffffffffffff

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

sctp: get sctphdr by offset in sctp_compute_cksum

2019-03-19T01:16:12+00:00

sctp_hdr(skb) only works when skb->transport_header is set properly.

But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.

So fix it by using offset, which is always right in all places.

v1->v2:
  - Fix the changelog.

Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

packets: Always register packet sk in the same order

2019-03-19T00:58:39+00:00

When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.

The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.

However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.

This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.

In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.

This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.

Note that this changes the order in which sockets are listed in /proc and
with sock_diag.

Fixes: dc99f600698d ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller