linux.git/include/net/sctp, branch v4.20-rc2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-10-19T18:03:06+00:00

net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.

net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'.  Thanks to David
Ahern for the heads up.

Signed-off-by: David S. Miller

sctp: count both sk and asoc sndbuf with skb truesize and sctp_chunk size

2018-10-18T18:23:47+00:00

Now it's confusing that asoc sndbuf_used is doing memory accounting with
SCTP_DATA_SNDSIZE(chunk) + sizeof(sk_buff) + sizeof(sctp_chunk) while sk
sk_wmem_alloc is doing that with skb->truesize + sizeof(sctp_chunk).

It also causes sctp_prsctp_prune to count with a wrong freed memory when
sndbuf_policy is not set.

To make this right and also keep consistent between asoc sndbuf_used, sk
sk_wmem_alloc and sk_wmem_queued, use skb->truesize + sizeof(sctp_chunk)
for them.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: fix the data size calculation in sctp_data_size

2018-10-18T05:32:21+00:00

sctp data size should be calculated by subtracting data chunk header's
length from chunk_hdr->length, not just data header.

Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

sctp: use the pmtu from the icmp packet to update transport pathmtu

2018-10-16T05:54:20+00:00

Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu
is also processing transport pmtu_pending by icmp packets. But it's
meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport.

The right pmtu value should come from the icmp packet, and it would
be saved into transport->mtu_info in this patch and used later when
the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config.

Besides, without this patch, as pmtu can only be updated correctly
when receiving a icmp packet and no place is holding sock lock, it
will take long time if the sock is busy with sending packets.

Note that it doesn't process transport->mtu_info in .release_cb(),
as there is no enough information for pmtu update, like for which
asoc or transport. It is not worth traversing all asocs to check
pmtu_pending. So unlike tcp, sctp does this in tx path, for which
mtu_info needs to be atomic_t.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

net/sctp: Replace in/out stream arrays with flex_array

2018-08-11T19:25:15+00:00

This path replaces physically contiguous memory arrays
allocated using kmalloc_array() with flexible arrays.
This enables to avoid memory allocation failures on the
systems under a memory stress.

Signed-off-by: Oleg Babin 
Signed-off-by: Konstantin Khorenko 
Signed-off-by: David S. Miller

net/sctp: Make wrappers for accessing in/out streams

2018-08-11T19:25:15+00:00

This patch introduces wrappers for accessing in/out streams indirectly.
This will enable to replace physically contiguous memory arrays
of streams with flexible arrays (or maybe any other appropriate
mechanism) which do memory allocation on a per-page basis.

Signed-off-by: Oleg Babin 
Signed-off-by: Konstantin Khorenko 
Signed-off-by: David S. Miller

sctp: add support for dscp and flowlabel per transport

2018-07-04T02:36:54+00:00

Like some other per transport params, flowlabel and dscp are added
in transport, asoc and sctp_sock. By default, transport sets its
value from asoc's, and asoc does it from sctp_sock. flowlabel
only works for ipv6 transport.

Other than that they need to be passed down in sctp_xmit, flow4/6
also needs to set them before looking up route in get_dst.

Note that it uses '& 0x100000' to check if flowlabel is set and
'& 0x1' (tos 1st bit is unused) to check if dscp is set by users,
so that they could be set to 0 by sockopt in next patch.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net

2018-07-03T01:29:26+00:00

Simple overlapping changes in stmmac driver.

Adjust skb_gro_flush_final_remcsum function signature to make GRO list
changes in net-next, as per Stephen Rothwell's example merge
resolution.

Signed-off-by: David S. Miller

sctp: add support for SCTP_REUSE_PORT sockopt

2018-06-29T13:20:55+00:00

This feature is actually already supported by sk->sk_reuse which can be
set by socket level opt SO_REUSEADDR. But it's not working exactly as
RFC6458 demands in section 8.1.27, like:

  - This option only supports one-to-one style SCTP sockets
  - This socket option must not be used after calling bind()
    or sctp_bindx().

Besides, SCTP_REUSE_PORT sockopt should be provided for user's programs.
Otherwise, the programs with SCTP_REUSE_PORT from other systems will not
work in linux.

To separate it from the socket level version, this patch adds 'reuse' in
sctp_sock and it works pretty much as sk->sk_reuse, but with some extra
setup limitations that are needed when it is being enabled.

"It should be noted that the behavior of the socket-level socket option
to reuse ports and/or addresses for SCTP sockets is unspecified", so it
leaves SO_REUSEADDR as is for the compatibility.

Note that the name SCTP_REUSE_PORT is somewhat confusing, as its
functionality is nearly identical to SO_REUSEADDR, but with some
extra restrictions. Here it uses 'reuse' in sctp_sock instead of
'reuseport'. As for sk->sk_reuseport support for SCTP, it will be
added in another patch.

Thanks to Neil to make this clear.

v1->v2:
  - add sctp_sk->reuse to separate it from the socket level version.
v2->v3:
  - improve changelog according to Marcelo's suggestion.

Acked-by: Neil Horman 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL

2018-06-28T17:40:47+00:00

The poll() changes were not well thought out, and completely
unexplained.  They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.

Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead.  That gets rid of one of the new indirections.

But that doesn't fix the new complexity that is completely unwarranted
for the regular case.  The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.

[ This revert is a revert of about 30 different commits, not reverted
  individually because that would just be unnecessarily messy  - Linus ]

Cc: Al Viro 
Cc: Christoph Hellwig 
Signed-off-by: Linus Torvalds