Extend struct nft_data_desc to add a flag field that specifies
nft_data_init() is being called for set element data.

Use it to disallow jump to implicit chain from set element, only jump
to chain via immediate expression is allowed.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Instead of parsing the data and then validate that type and length are
correct, pass a description of the expected data so it can be validated
upfront before parsing it to bail out earlier.

This patch adds a new .size field to specify the maximum size of the
data area. The .len field is optional and it is used as an input/output
field, it provides the specific length of the expected data in the input
path. If then .len field is not specified, then obtained length from the
netlink attribute is stored. This is required by cmp, bitwise, range and
immediate, which provide no netlink attribute that describes the data
length. The immediate expression uses the destination register type to
infer the expected data type.

Relying on opencoded validation of the expected data might lead to
subtle bugs as described in 7e6bc1f6cabc ("netfilter: nf_tables:
stricter validation of element data").

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Update template to validate variable length extensions. This patch adds
a new .ext_len[id] field to the template to store the expected extension
length. This is used to sanity check the initialization of the variable
length extension.

Use PTR_ERR() in nft_set_elem_init() to report errors since, after this
update, there are two reason why this might fail, either because of
ENOMEM or insufficient room in the extension field (EINVAL).

Kernels up until 7e6bc1f6cabc ("netfilter: nf_tables: stricter
validation of element data") allowed to copy more data to the extension
than was allocated. This ext_len field allows to validate if the
destination has the correct size as additional check.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Daniel Borkmann says:

====================
bpf-next 2022-07-22

We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).

The main changes are:

1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.

2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
   syscalls through kprobe mechanism, from Andrii Nakryiko.

3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
   function, from Song Liu & Jiri Olsa.

4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
   entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.

5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
   with kernel symbols, from Alan Maguire.

6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.

7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.

8) libbpf support for writing custom perf event readers, from Jon Doron.

9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.

10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.

11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.

12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.

13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.

14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.

15) Make non-prealloced BPF map allocations low priority to play better with
    memcg limits, from Yafang Shao.

16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.

17) Various smaller cleanups and improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
  bpf: Simplify bpf_prog_pack_[size|mask]
  bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
  bpf, x64: Allow to use caller address from stack
  ftrace: Allow IPMODIFY and DIRECT ops on the same function
  ftrace: Add modify_ftrace_direct_multi_nolock
  bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
  bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
  selftests/bpf: Fix test_verifier failed test in unprivileged mode
  selftests/bpf: Add negative tests for new nf_conntrack kfuncs
  selftests/bpf: Add tests for new nf_conntrack kfuncs
  selftests/bpf: Add verifier tests for trusted kfunc args
  net: netfilter: Add kfuncs to set and change CT status
  net: netfilter: Add kfuncs to set and change CT timeout
  net: netfilter: Add kfuncs to allocate and insert CT
  net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
  bpf: Add documentation for kfuncs
  bpf: Add support for forcing kfunc args to be trusted
  bpf: Switch to new kfunc flags infrastructure
  tools/resolve_btfids: Add support for 8-byte BTF sets
  bpf: Introduce 8-byte BTF set
  ...
====================

Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce bpf_ct_set_status and bpf_ct_change_status kfunc helpers in
order to set nf_conn field of allocated entry or update nf_conn status
field of existing inserted entry. Use nf_ct_change_status_common to
share the permitted status field changes between netlink and BPF side
by refactoring ctnetlink_change_status.

It is required to introduce two kfuncs taking nf_conn___init and nf_conn
instead of sharing one because KF_TRUSTED_ARGS flag causes strict type
checking. This would disallow passing nf_conn___init to kfunc taking
nf_conn, and vice versa. We cannot remove the KF_TRUSTED_ARGS flag as we
only want to accept refcounted pointers and not e.g. ct->master.

Hence, bpf_ct_set_* kfuncs are meant to be used on allocated CT, and
bpf_ct_change_* kfuncs are meant to be used on inserted or looked up
CT entry.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Introduce bpf_ct_set_timeout and bpf_ct_change_timeout kfunc helpers in
order to change nf_conn timeout. This is same as ctnetlink_change_timeout,
hence code is shared between both by extracting it out to
__nf_ct_change_timeout. It is also updated to return an error when it
sees IPS_FIXED_TIMEOUT_BIT bit in ct->status, as that check was missing.

It is required to introduce two kfuncs taking nf_conn___init and nf_conn
instead of sharing one because KF_TRUSTED_ARGS flag causes strict type
checking. This would disallow passing nf_conn___init to kfunc taking
nf_conn, and vice versa. We cannot remove the KF_TRUSTED_ARGS flag as we
only want to accept refcounted pointers and not e.g. ct->master.

Apart from this, bpf_ct_set_timeout is only called for newly allocated
CT so it doesn't need to inspect the status field just yet. Sharing the
helpers even if it was possible would make timeout setting helper
sensitive to order of setting status and timeout after allocation.

Hence, bpf_ct_set_* kfuncs are meant to be used on allocated CT, and
bpf_ct_change_* kfuncs are meant to be used on inserted or looked up
CT entry.

Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-9-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Introduce bpf_xdp_ct_alloc, bpf_skb_ct_alloc and bpf_ct_insert_entry
kfuncs in order to insert a new entry from XDP and TC programs.
Introduce bpf_nf_ct_tuple_parse utility routine to consolidate common
code.

We extract out a helper __nf_ct_set_timeout, used by the ctnetlink and
nf_conntrack_bpf code, extract it out to nf_conntrack_core, so that
nf_conntrack_bpf doesn't need a dependency on CONFIG_NF_CT_NETLINK.
Later this helper will be reused as a helper to set timeout of allocated
but not yet inserted CT entry.

The allocation functions return struct nf_conn___init instead of
nf_conn, to distinguish allocated CT from an already inserted or looked
up CT. This is later used to enforce restrictions on what kfuncs
allocated CT can be used with.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220721134245.2450-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next:

1) Simplify nf_ct_get_tuple(), from Jackie Liu.

2) Add format to request_module() call, from Bill Wendling.

3) Add /proc/net/stats/nf_flowtable to monitor in-flight pending
   hardware offload objects to be processed, from Vlad Buslov.

4) Missing rcu annotation and accessors in the netfilter tree,
   from Florian Westphal.

5) Merge h323 conntrack helper nat hooks into single object,
   also from Florian.

6) A batch of update to fix sparse warnings treewide,
   from Florian Westphal.

7) Move nft_cmp_fast_mask() where it used, from Florian.

8) Missing const in nf_nat_initialized(), from James Yonan.

9) Use bitmap API for Maglev IPVS scheduler, from Christophe Jaillet.

10) Use refcount_inc instead of _inc_not_zero in flowtable,
    from Florian Westphal.

11) Remove pr_debug in xt_TPROXY, from Nathan Cancellor.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: xt_TPROXY: remove pr_debug invocations
  netfilter: flowtable: prefer refcount_inc
  netfilter: ipvs: Use the bitmap API to allocate bitmaps
  netfilter: nf_nat: in nf_nat_initialized(), use const struct nf_conn *
  netfilter: nf_tables: move nft_cmp_fast_mask to where its used
  netfilter: nf_tables: use correct integer types
  netfilter: nf_tables: add and use BE register load-store helpers
  netfilter: nf_tables: use the correct get/put helpers
  netfilter: x_tables: use correct integer types
  netfilter: nfnetlink: add missing __be16 cast
  netfilter: nft_set_bitmap: Fix spelling mistake
  netfilter: h323: merge nat hook pointers into one
  netfilter: nf_conntrack: use rcu accessors where needed
  netfilter: nf_conntrack: add missing __rcu annotations
  netfilter: nf_flow_table: count pending offload workqueue tasks
  net/sched: act_ct: set 'net' pointer when creating new nf_flow_table
  netfilter: conntrack: use correct format characters
  netfilter: conntrack: use fallthrough to cleanup
====================

Link: https://lore.kernel.org/r/20220720230754.209053-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nf_nat_initialized() doesn't modify passed struct nf_conn,
so declare as const.

This is helpful for code readability and makes it possible
to call nf_nat_initialized() with a const struct nf_conn *.

Signed-off-by: James Yonan <james@openvpn.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

... and cast result to u32 so sparse won't complain anymore.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>