linux.git/include/net/bonding.h, branch v6.1

net: bonding: Share lacpdu_mcast_addr definition

2022-09-16T13:34:01+00:00

There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.

Signed-off-by: Benjamin Poirier 
Signed-off-by: David S. Miller

net: bonding: replace dev_trans_start() with the jiffies of the last ARP/NS

2022-08-04T02:20:12+00:00

The bonding driver piggybacks on time stamps kept by the network stack
for the purpose of the netdev TX watchdog, and this is problematic
because it does not work with NETIF_F_LLTX devices.

It is hard to say why the driver looks at dev_trans_start() of the
slave->dev, considering that this is updated even by non-ARP/NS probes
sent by us, and even by traffic not sent by us at all (for example PTP
on physical slave devices). ARP monitoring in active-backup mode appears
to still work even if we track only the last TX time of actual ARP
probes.

Signed-off-by: Vladimir Oltean 
Acked-by: Jay Vosburgh 
Signed-off-by: Jakub Kicinski

Bonding: add per-port priority for failover re-selection

2022-06-24T10:27:59+00:00

Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.

This option could only be configured via netlink.

Signed-off-by: Hangbin Liu 
Acked-by: Jonathan Toppins 
Signed-off-by: David S. Miller

bonding: guard ns_targets by CONFIG_IPV6

2022-06-01T09:18:55+00:00

Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save
256 bytes if IPv6 not configed. Also add this protection for function
bond_is_ip6_target_ok() and bond_get_targets_ip6().

Remove the IS_ENABLED() check for bond_opts[] as this will make
BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add
a dummy bond_option_ns_ip6_targets_set() for this situation.

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu 
Acked-by: Jonathan Toppins 
Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni

net: add per-cpu storage and net->core_stats

2022-03-12T07:17:24+00:00

Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
 dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler

Because many devices do not have to increment such counters,
allocate the per-cpu storage on demand, so that dev_get_stats()
does not have to spend considerable time folding zero counters.

Note that some drivers have abused these counters which
were supposed to be only used by core networking stack.

v4: should use per_cpu_ptr() in dev_get_stats() (Jakub)
v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo)
v2: add a missing include (reported by kernel test robot )
    Change in netdev_core_stats_alloc() (Jakub)

Signed-off-by: Eric Dumazet 
Cc: jeffreyji 
Reviewed-by: Brian Vazquez 
Reviewed-by: Jakub Kicinski 
Acked-by: Paolo Abeni 
Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski

bonding: add new option ns_ip6_target

2022-02-21T12:13:45+00:00

This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.

For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.

Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famine

Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller

bonding: add new parameter ns_targets

2022-02-21T12:13:45+00:00

Add a new bonding parameter ns_targets to store IPv6 address.
Add required bond_ns_send/rcv functions first before adding
IPv6 address option setting.

Add two functions bond_send/rcv_validate so we can send/recv
ARP and NS at the same time.

Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller

net: remove bond_slave_has_mac_rcu()

2022-01-27T13:53:26+00:00

No caller since v3.16.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

bonding: use rcu_dereference_rtnl when get bonding active slave

2022-01-24T11:57:38+00:00

bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it
use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use
this function in rtnl protected context.

With this update, we can rmeove the rcu_read_lock/unlock in
bonding .ndo_eth_ioctl and .get_ts_info.

Reported-by: Vladimir Oltean 
Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device")
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller

Bonding: add arp_missed_max option

2021-11-30T12:15:58+00:00

Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.

Acked-by: Jay Vosburgh 
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller