linux.git/include/media, branch v5.2-rc1

Merge tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2019-05-16T18:57:16+00:00

Pull media fixes from Mauro Carvalho Chehab:
 "Some fixes for some platform drivers (rockchip, atmel, omap, daVinci,
  tegra-cec, coda and rcar).

  Also includes a fix on one of the V4L2 uAPI doc, explaining a border
  case"

* tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: rockchip/vpu: Fix/re-order probe-error/remove path
  media: rockchip/vpu: Initialize mdev->bus_info
  media: rockchip/vpu: Get vdev from the file arg in vidioc_querycap()
  media: rockchip/vpu: Add missing dont_use_autosuspend() calls
  media: rockchip/vpu: Do not request id 0 for our video device
  media: tegra-cec: fix cec_notifier_parse_hdmi_phandle return check
  media: davinci/vpbe: array underflow in vpbe_enum_outputs()
  media: field-order.rst: clarify FIELD_ANY and FIELD_NONE
  media: staging/imx: add media device to capture register
  media: rcar-csi2: Propagate the FLD signal for NTSC and PAL
  media: rcar-csi2: restart CSI-2 link if error is detected
  media: omap_vout: potential buffer overflow in vidioc_dqbuf()
  media: coda: fix unset field and fail on invalid field in buf_prepare
  media: atmel: atmel-isc: fix asd memory allocation
  media: atmel: atmel-isc: fix INIT_WORK misplacement
  media: atmel: atmel-isc: limit incoming pixels per frame

Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

2019-05-09T04:35:19+00:00

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

media: davinci/vpbe: array underflow in vpbe_enum_outputs()

2019-05-08T18:02:25+00:00

In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but
the problem is that "temp_index" can be negative.  This patch changes
the types to unsigned to address this array underflow bug.

Fixes: 66715cdc3224 ("[media] davinci vpbe: VPBE display driver")

Signed-off-by: Dan Carpenter 
Acked-by: "Lad, Prabhakar" 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: cec-notifier: add cec_notifier_parse_hdmi_phandle helper

2019-04-22T17:09:59+00:00

Add helper function to parse the DT for the hdmi-phandle property
and return the corresponding struct device pointer.

It takes care to avoid increasing the device refcount since all
we need is the device pointer. This pointer is used in the
notifier list as a key, but it is never accessed by the CEC driver.

Signed-off-by: Hans Verkuil 
Reported-by: Wen Yang 
Acked-by: Wen Yang 
Signed-off-by: Mauro Carvalho Chehab

media: rc: xbox_remote: add protocol and set timeout

2019-04-22T17:02:53+00:00

The timestamps in ir-keytable -t output showed that the Xbox DVD
IR dongle decodes scancodes every 64ms. The last scancode of a
longer button press is decodes 64ms after the last-but-one which
indicates the decoder doesn't use a timeout but decodes on the last
edge of the signal.

267.042629: lirc protocol(unknown): scancode = 0xace
267.042665: event type EV_MSC(0x04): scancode = 0xace
267.042665: event type EV_KEY(0x01) key_down: KEY_1(0x0002)
267.042665: event type EV_SYN(0x00).
267.106625: lirc protocol(unknown): scancode = 0xace
267.106643: event type EV_MSC(0x04): scancode = 0xace
267.106643: event type EV_SYN(0x00).
267.170623: lirc protocol(unknown): scancode = 0xace
267.170638: event type EV_MSC(0x04): scancode = 0xace
267.170638: event type EV_SYN(0x00).
267.234621: lirc protocol(unknown): scancode = 0xace
267.234636: event type EV_MSC(0x04): scancode = 0xace
267.234636: event type EV_SYN(0x00).
267.298623: lirc protocol(unknown): scancode = 0xace
267.298638: event type EV_MSC(0x04): scancode = 0xace
267.298638: event type EV_SYN(0x00).
267.543345: event type EV_KEY(0x01) key_down: KEY_1(0x0002)
267.543345: event type EV_SYN(0x00).
267.570015: event type EV_KEY(0x01) key_up: KEY_1(0x0002)
267.570015: event type EV_SYN(0x00).

Add a protocol with the repeat value and set the timeout in the
driver to 10ms (to have a bit of headroom for delays) so the Xbox
DVD remote performs more responsive.

Signed-off-by: Matthias Reichl 
Acked-by: Benjamin Valentin 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

media: vb2: add waiting_in_dqbuf flag

2019-04-22T15:50:07+00:00

Calling VIDIOC_DQBUF can release the core serialization lock pointed to
by vb2_queue->lock if it has to wait for a new buffer to arrive.

However, if userspace dup()ped the video device filehandle, then it is
possible to read or call DQBUF from two filehandles at the same time.

It is also possible to call REQBUFS from one filehandle while the other
is waiting for a buffer. This will remove all the buffers and reallocate
new ones. Removing all the buffers isn't the problem here (that's already
handled correctly by DQBUF), but the reallocating part is: DQBUF isn't
aware that the buffers have changed.

This is fixed by setting a flag whenever the lock is released while waiting
for a buffer to arrive. And checking the flag where needed so we can return
-EBUSY.

Signed-off-by: Hans Verkuil 
Reported-by: Syzbot 
Reviewed-by: Tomasz Figa 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: Media Device Allocator API

2019-04-22T15:18:26+00:00

Media Device Allocator API to allows multiple drivers share a media device.
This API solves a very common use-case for media devices where one physical
device (an USB stick) provides both audio and video. When such media device
exposes a standard USB Audio class, a proprietary Video class, two or more
independent drivers will share a single physical USB bridge. In such cases,
it is necessary to coordinate access to the shared resource.

Using this API, drivers can allocate a media device with the shared struct
device as the key. Once the media device is allocated by a driver, other
drivers can get a reference to it. The media device is released when all
the references are released.

Signed-off-by: Shuah Khan 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: Introduce helpers to fill pixel format structs

2019-04-22T14:33:06+00:00

Add two new API helpers, v4l2_fill_pixfmt and v4l2_fill_pixfmt_mp,
to be used by drivers to calculate plane sizes and bytes per lines.

Note that driver-specific padding and alignment are not
taken into account, and must be done by drivers using this API.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrls.h: remove spurious text

2019-04-22T14:30:04+00:00

Somehow the string "Controls name" got pasted in two places
where it doesn't belong. Remove that text.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vicodec: Introducing stateless fwht defs and structs

2019-03-25T18:02:30+00:00

Add structs and definitions needed to implement stateless
decoder for fwht and add I/P-frames QP controls to the
public api.

Signed-off-by: Dafna Hirschfeld 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab