Pull bpf fixes from Kumar Kartikeya Dwivedi:

 - Fix a UAF in socket clone early bailout paths (Matt Bobrowski)

 - Reject unhashed UDP sockets on sockmap update to prevent refcount
   leaks (Michal Luczaj)

 - Account for receive queue data in FIONREAD on sockmap sockets without
   a verdict program (Mattia Meleleo)

 - Reject negative constant offsets for verifier buffer pointers (Sun
   Jian)

 - Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)

* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Cover tracing implicit kfunc args
  bpf: Fix tracing of kfuncs with implicit args
  selftests/bpf: Cover negative buffer pointer offsets
  bpf: Reject negative const offsets for buffer pointers
  selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
  bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
  selftests/bpf: Fail unbound UDP on sockmap update
  selftests/bpf: Adapt sockmap update error handling
  bpf, sockmap: Reject unhashed UDP sockets on sockmap update
  selftests/bpf: Ensure UDP sockets are bound
  bpf: Fix UAF in sock clone early bailouts

Pull networking fixes from Paolo Abeni:
 "Including fixes from Wireless, IPsec, Netfilter and Bluetooth.

  Current release - new code bugs:

    - netfilter: flowtable: use correct direction to set up tunnel route

  Previous releases - regressions:

    - wifi:
       - mac80211:
          - free AP_VLAN bc_buf SKBs outside IRQ lock
          - defer link RX stats percpu free to RCU
          - fix double free on alloc failure
       - cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock

    - ipv4: free fib_alias with kfree_rcu() on insert error path

    - sched: act_tunnel_key: Defer dst_release to RCU callback

    - xfrm: fix sk_dst_cache double-free in xfrm_user_policy()

    - bluetooth: fix locking in unpair_device/disconnect_sync

    - can: add locking for raw flags bitfield

    - openvswitch: reject oversized nested action attrs

    - eth:
       - bnxt_en: handle partially initialized auxiliary devices
       - ppp: defer channel free to an RCU grace period to fix UAF

  Previous releases - always broken:

    -  netfilter: xt_nat: reject unsupported target families

    -  wifi:
        - brcmfmac: fix heap overflow on a short auth frame
        - cfg80211: add missing FTM API validation

    - xfrm:
       - reject optional IPTFS templates in outbound policies
       - policy: preallocate inexact bins before xfrm_hash_rebuild reinsert

    - bluetooth: revalidate LOAD_CONN_PARAM queued update

    - can: fix lockless bound/ifindex race and silent RX_SETUP failure

    - eth: mlx5: free mlx5_st_idx_data on final dealloc"

* tag 'net-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
  mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
  llc: fix SAP refcount leak when creating incoming sockets
  selftests: netconsole: only restore MAC when it changed on resume
  bnxt_en: Handle partially initialized auxiliary devices
  sctp: fix auth_hmacs array size in struct sctp_cookie
  net/sched: act_tunnel_key: Defer dst_release to RCU callback
  dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
  tcp: fix TIME_WAIT socket reference leak on PSP policy failure
  net/mlx5: free mlx5_st_idx_data on final dealloc
  can: isotp: serialize TX state transitions under so->rx_lock
  can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
  can: isotp: use unconditional synchronize_rcu() in isotp_release()
  can: bcm: track a single source interface for ANYDEV timeout/throttle ops
  can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
  can: bcm: fix stale rx/tx ops after device removal
  can: bcm: add missing device refcount for CAN filter removal
  can: bcm: validate frame length in bcm_rx_setup() for RTR replies
  can: bcm: extend bcm_tx_lock usage for data and timer updates
  can: bcm: add missing rcu list annotations and operations
  can: bcm: fix CAN frame rx/tx statistics
  ...

A kfunc marked with KF_IMPLICIT_ARGS flag takes implicit arguments
(such as bpf_prog_aux) that the verifier injects at load time.
resolve_btfids strips those from the kfunc's BTF-visible prototype and
keeps the real kernel ABI in a counterpart _impl prototype [1].

fentry/fexit/fmod_ret/fsession programs may attach to the BPF kernel
functions, including those with implicit args. However
bpf_check_attach_target() and bpf_check_attach_btf_id_multi() extract
the struct btf_func_model from the wrong BTF prototype of the
kfunc. The btf_func_model is later read to construct the trampoline,
which then causes the injected implicit argument to be clobbered and
the kfunc dereferencing garbage.

Add btf_attach_func_proto() to resolve the real ABI prototype of the
kfunc the way the call site does: by looking up the _impl prototype
for a KF_IMPLICIT_ARGS kfunc. Use it at both attach-target model
construction sites.

To enable this, make two supporting changes:
  * pass bpf_verifier_log instead of bpf_verifier_env to
    find_kfunc_impl_proto(), so it can be reused from the attach path
  * add btf_kfunc_check_flag() to test a flag across all of a kfunc's
    hook sets, because a program attaching to a kfunc is not in the
    kfunc's call-set

KF_IMPLICIT_ARGS must be consistent across the sets, so
btf_kfunc_check_flag() returns -EINVAL on inconsistency.

btf_kfunc_check_flag() reads the kfunc's flags from the target's
kfunc_set_tab. For a module BTF that table is stable only after the
module is live, so take a module reference around the read, mirroring
how the kfunc call path gates the same lookup with btf_try_get_module().

The remaining call sites of btf_distill_func_proto() are safe as
is. The BPF_TRACE_ITER case distills a registered iterator's
prototype, and bpf_struct_ops_desc_init() distills the
function-pointer members of a struct_ops type. Neither is a kfunc, and
so can't have implicit arguments.

[1] https://lore.kernel.org/all/20260120222638.3976562-1-ihor.solodrai@linux.dev/

Fixes: 64e1360524b9 ("bpf: Verifier support for KF_IMPLICIT_ARGS")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://github.com/sched-ext/scx/issues/3687#issuecomment-4906694106
Link: https://patch.msgid.link/20260713235223.1639022-2-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>

Following the sale of PEAK-System France by HMS-Networks, this update is
intended to change all my @hms-networks.com email addresses to my new
@peak-system.fr address.

Signed-off-by: Stéphane Grosjean <s.grosjean@peak-system.fr>
Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

KVM/arm64 fixes for 7.2, take #2

- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
  race-free checks that the returned object is of the correct type

- Fix initialisation of the page-table walk level when relaxing
  permissions

- Correctly update the XN attribute when relaxing permissions

- Fix the sign extension of loads from emulated MMIO regions

- Assorted collection of fixes for pKVM's FFA proxy, together with a
  couple of FFA driver adjustments

tcp_bpf_ioctl() answers SIOCINQ from psock->msg_tot_len, which only
counts bytes in ingress_msg. Without a stream/skb verdict program
nothing is diverted there: data stays in sk_receive_queue, so FIONREAD
returns 0 even though read() returns data.

Add tcp_inq() to the reported value when the psock has no verdict
program. The two queues are disjoint, so bytes redirected into
ingress_msg from other sockets stay correctly accounted through
msg_tot_len.

Remove unused sk_psock_msg_inq().

Fixes: 929e30f93125 ("bpf, sockmap: Fix FIONREAD for sockmap")
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-1-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>

Pull Android/IIO fixes from Greg KH:
 "Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
  issues in just the binder and iio codebases. Included in here are:

   - binder driver bugfixes for both the rust and c versions for
     reported problems

   - lots and lots of iio driver bugfixes for lots of reported issues
     (including a hid sensor driver bugfix)

  Full details are in the shortlog, all of these have been in linux-next
  with no reported issues"

* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
  iio: event: Fix event FIFO reset race
  iio: imu: inv_icm42600: fix timestamp clock period by using lower value
  iio: light: al3010: fix incorrect scale for the highest gain range
  iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
  iio: light: tsl2591: return actual error from probe IRQ failure
  iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
  iio: imu: st_lsm6dsx: deselect shub page before reading whoami
  rust_binder: clear freeze listener on node removal
  rust_binder: reject context manager self-transaction
  rust_binder: use a u64 stride when cleaning up the offsets array
  binder: fix UAF in binder_free_transaction()
  binder: fix UAF in binder_thread_release()
  rust_binder: synchronize Rust Binder stats with freeze commands
  binder: cache secctx size before release zeroes it
  rust_binder: fix BINDER_GET_EXTENDED_ERROR
  iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
  iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
  iio: adc: ti-ads124s08: Return reset GPIO lookup errors
  iio: temperature: Build mlx90635 with CONFIG_MLX90635
  iio: light: al3320a: add missing REGMAP_I2C to Kconfig
  ...

Pull tracing fixes from Steven Rostedt:

 - Free field in error path of synthetic event parse

   In __create_synth_event() the field was allocated but was not freed
   in the error path

 - Fix ring_buffer_event_length() on 8 byte aligned architectures

   On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, the
   ring_buffer_event_length() may return the wrong size. This is because
   archs with that config set will always use the "big event meta
   header" as that is 8 bytes keeping the payload 8 bytes aligned, even
   when a 4 byte header could hold the size of the event

   But ring_buffer_event_length() doesn't take this into account and
   only subtracts 4 bytes for the meta header in the length when it
   should have subtracted 8 bytes

 - Have osnoise wait for a full rcu synchronization on unregister

   osnoise_unregister_instance() used to call synchronize_rcu() before
   freeing its copy of the instance but was switched to kfree_rcu(). The
   osniose tracer has code that traverses the instances that it uses,
   and inst is just a pointer to that instance. By using kfree_rcu()
   instead of synchronize_rcu(), the instance that the inst pointer is
   pointing to can be freed while the osnoise code is still referencing
   it

   That is, a rmdir on an instance first unregisters the tracer. When
   the unregister finishes, the rmdir expects that the tracer is
   finished with the instance that it is using. By putting back the
   synchronize_rcu() in osnoise_unregister_instance() the unregistering
   of osnoise will now return when all the users of the instance have
   finished

 - Remove an unused setting of "ret" in tracing_set_tracer()

 - Fix ring_buffer_read_page() copying events

   The commit that changed ring_buffer_read_page() to show dropped
   events from the buffer itself, split the "commit" variable between
   the commit value (with flags) and "size" that holds the size of the
   sub-buffer. A cut and paste error changed the test of the reading
   from checking the size of the buffer to the size of the event causing
   reads to only read one event at a time

 - Make tracepoint_printk a static variable

   When the tracing sysctl knobs were move from sysctl.c to trace.c, the
   variable tracepoint_printk no longer needed to be global. Make it
   static

 - Fix some typos

 - Fix NULL pointer dereference in func_set_flag()

   The flags update of the function tracer first checks if the value of
   the flag is the same and exits if they are, and then it checks if the
   current tracer is the function tracer and exits if it isn't. The
   problem is that these checks need to be in a reversed order, as if
   the tracer isn't the function tracer, then the flag being checked may
   not exist. Reverse the order of these checks

 - Fix ufs core trace events to not dereference a pointer in TP_printk()

   The TP_printk() part of the TRACE_EVENT() macro is called when the
   user reads the "trace" file. This can be seconds, minutes, hours,
   days, weeks, and even months after the data was recorded into the
   ring buffer. Thus, saving a pointer to an object into the ring buffer
   and then dereferencing it from TP_printk() can cause harm as the
   object the pointer is pointing to may no longer exist

   Fix all the trace events in ufs core to save the device name in the
   ring buffer instead of dereferencing the device descriptor from
   TP_printk()

 - Prevent out-of-bound reads in glob matching of trace events

   The filter logic of events allows simple glob logic to add wild cards
   to filter on strings. But some events have fields that may not have a
   terminating 'nul' character. This may cause the glob matching to go
   beyond the string. Change the logic to always pass in the length of
   the field that is being matched

 - Add no-rcu-check version of trace_##event##_enabled()

   The trace_##event##_enabled() usually wraps trace events to do extra
   work that is only needed when the trace event is enabled. But this
   can hide events that are placed in locations where RCU is not
   watching, and can make lockdep not see these bugs when the event is
   not enabled

   The trace_##event##_enabled() was updated to always test to make sure
   RCU is watching to catch locations that may call events without RCU
   being active

   This caused a false positive for the irq_disabled() and related
   events. As that use trace_irq_disabled_enabled() to force RCU to be
   watching when the event is enabled via the ct_irq_enter() function,
   calls the event, and then calls ct_irq_exit() to put RCU back to its
   original state

   The trace_irq_disabled_enabled() should not trigger a warning when
   RCU is not watching because the code within its block handles the
   case properly. Make a __trace_##event##_enabled() version for this
   event to use that doesn't check RCU is watching as it handles the
   case when it isn't

 - Fix use-after-free in user_event_mm_dup()

   When the enabler is removed from the link list, it is freed
   immediately. But it is protected via RCU and needs to be freed after
   an RCU grace period. Use queue_rcu_work() so that the event_mutex can
   also be taken as user_event_put() takes the mutex on the last
   reference is released

 - Free type string in error path of parse_synth_field()

   There's an error path in parse_synth_field() where the allocated type
   string is not freed

 - Add selftest that tests deferred event teardown

 - Fix leak in error path of trace_remote_alloc_buffer()

   If page allocation fails, the desc->nr_cpus is not incremented for
   the current CPU and the allocations done for it are not freed

 - Fix allocation length in trace_remote_alloc_buffer()

   The logic to calculate the struct_len was doing a double count and
   setting the value too large. Calculate the size upfront to fix the
   error and simplify the logic

 - Fix sparse CPU masks in ring_buffer_desc()

   If there are sparse CPUs (gaps in the numbering), the
   ring_buffer_desc() will fail as it tests the CPU number against the
   number of CPUs that are used

* tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Allow sparse CPU masks in ring_buffer_desc()
  tracing/remotes: Fix struct_len in trace_remote_alloc_buffer()
  tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
  selftests/user_events: Wait for deferred event teardown after unregister
  tracing/synthetic: Free type string on error path
  tracing/user_events: Fix use-after-free in user_event_mm_dup()
  tracing: Add a no-rcu-check version of trace_##event##_enabled()
  tracing: Prevent out-of-bounds read in glob matching
  ufs: core: tracing: Do not dereference pointers in TP_printk()
  tracing: Fix NULL pointer dereference in func_set_flag()
  samples: ftrace: Fix typos in benchmark comment
  tracing: Make tracepoint_printk static as not exported
  ring-buffer: Fix ring_buffer_read_page() copying only one event per page
  tracing: Remove unused ret assignment in tracing_set_tracer()
  tracing/osnoise: Call synchronize_rcu() when unregistering
  ring-buffer: Fix event length with forced 8-byte alignment
  tracing/synthetic: Free pending field on error path

Pull NFS client fixes from Anna Schumaker:

 - SUNRPC:
    - Release lower rpc_clnt if killed waiting for XPRT_LOCKED
    - Pin upper rpc_clnt across the TLS connect_worker

 - NFS:
    - Include MAY_WRITE in open permission mask for O_TRUNC
    - Charge unstable writes by request size, not folio size

* tag 'nfs-for-7.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Charge unstable writes by request size, not folio size
  NFSv4: include MAY_WRITE in open permission mask for O_TRUNC
  SUNRPC: pin upper rpc_clnt across the TLS connect_worker
  SUNRPC: release lower rpc_clnt if killed waiting for XPRT_LOCKED

Johannes Berg says:

====================
Too many robustness fixes to list. Mostly for
 - slight out-of-bounds reads of SKBs,
 - leaks on error conditions, and
 - malformed netlink input rejection.

* tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (46 commits)
  wifi: cfg80211: bound element ID read when checking non-inheritance
  wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
  wifi: brcmfmac: initialize SDIO data work before cleanup
  wifi: cfg80211: validate assoc response length before status and IE access
  wifi: cfg80211: validate rx/tx MLME callback frame lengths before access
  wifi: mac80211: ibss: wait for in-flight TX on disconnect
  wifi: mac80211: recalculate rx_nss on IBSS peer capability update
  wifi: cfg80211: use wiphy work for socket owner autodisconnect
  wifi: mac80211: fix memory leak in ieee80211_register_hw()
  wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock
  wifi: mac80211: validate deauth frame length before reason access
  wifi: mac80211: avoid non-S1G AID fallback for S1G assoc
  wifi: cfg80211: reject empty PMSR peer lists
  wifi: cfg80211: reject unsupported PMSR FTM location requests
  wifi: cfg80211: validate PMSR FTM preamble range
  wifi: cfg80211: validate PMSR measurement type data
  wifi: nl80211: constrain MBSSID TX link ID range
  wifi: nl80211: validate nested MBSSID IE blobs
  wifi: ieee80211: validate MLE common info length
  wifi: cfg80211: derive S1G beacon TSF from S1G fields
  ...
====================

Link: https://patch.msgid.link/20260709115038.243870-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>