linux.git/include/linux, branch v5.9-rc7

mm/fork: Pass new vma pointer into copy_page_range()

2020-09-27T18:21:35+00:00

This prepares for the future work to trigger early cow on pinned pages
during fork().

No functional change intended.

Signed-off-by: Peter Xu 
Signed-off-by: Linus Torvalds

mm: Introduce mm_struct.has_pinned

2020-09-27T18:21:35+00:00

(Commit message majorly collected from Jason Gunthorpe)

Reduce the chance of false positive from page_maybe_dma_pinned() by
keeping track if the mm_struct has ever been used with pin_user_pages().
This allows cases that might drive up the page ref_count to avoid any
penalty from handling dma_pinned pages.

Future work is planned, to provide a more sophisticated solution, likely
to turn it into a real counter.  For now, make it atomic_t but use it as
a boolean for simplicity.

Suggested-by: Jason Gunthorpe 
Signed-off-by: Peter Xu 
Signed-off-by: Linus Torvalds

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-09-26T18:18:37+00:00

Pull SCSI fixes from James Bottomley:
 "Three fixes: one in drivers (lpfc) and two for zoned block devices.

  The latter also impinges on the block layer but only to introduce a
  new block API for setting the zone model rather than fiddling with the
  queue directly in the zoned block driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: sd_zbc: Fix ZBC disk initialization
  scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
  scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported

Merge tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block

2020-09-26T18:07:36+00:00

Pull block fixes from Jens Axboe:
 "NVMe pull request from Christoph, and removal of a dead define.

   - fix error during controller probe that cause double free irqs
     (Keith Busch)

   - FC connection establishment fix (James Smart)

   - properly handle completions for invalid tags (Xianting Tian)

   - pass the correct nsid to the command effects and supported log
     (Chaitanya Kulkarni)"

* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
  block: remove unused BLK_QC_T_EAGAIN flag
  nvme-core: don't use NVME_NSID_ALL for command effects and supported log
  nvme-fc: fail new connections to a deleted host or remote port
  nvme-pci: fix NULL req in completion handler
  nvme: return errors for hwmon init

mm: don't rely on system state to detect hot-plug operations

2020-09-26T17:33:57+00:00

In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation.  Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state.  In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1].  So checking against the system state is not
enough.

The consequence is that on system with interleaved node's ranges like this:

 Early memory node ranges
   node   1: [mem 0x0000000000000000-0x000000011fffffff]
   node   2: [mem 0x0000000120000000-0x000000014fffffff]
   node   1: [mem 0x0000000150000000-0x00000001ffffffff]
   node   0: [mem 0x0000000200000000-0x000000048fffffff]
   node   2: [mem 0x0000000490000000-0x00000007ffffffff]

This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done.  At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:

  $ ls -l /sys/devices/system/memory/memory21/node*
  total 0
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node1 -> ../../node/node1
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node2 -> ../../node/node2

In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():

  kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
  Oops: Exception in kernel mode, sig: 5 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
  CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
  Call Trace:
    add_memory_resource+0x23c/0x340 (unreliable)
    __add_memory+0x5c/0xf0
    dlpar_add_lmb+0x1b4/0x500
    dlpar_memory+0x1f8/0xb80
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    vfs_write+0xe8/0x290
    ksys_write+0xdc/0x130
    system_call_exception+0x160/0x270
    system_call_common+0xf0/0x27c

This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation.  An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.

[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:

  $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
        -m size=$MEM,slots=255,maxmem=4294967296k  \
        -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
        -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
        -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
        -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
        -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
        -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
        -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
        -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \

Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour 
Signed-off-by: Andrew Morton 
Reviewed-by: David Hildenbrand 
Reviewed-by: Oscar Salvador 
Acked-by: Michal Hocko 
Cc: Greg Kroah-Hartman 
Cc: "Rafael J. Wysocki" 
Cc: Fenghua Yu 
Cc: Nathan Lynch 
Cc: Scott Cheloha 
Cc: Tony Luck 
Cc: 
Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds

mm: replace memmap_context by meminit_context

2020-09-26T17:33:57+00:00

Patch series "mm: fix memory to node bad links in sysfs", v3.

Sometimes, firmware may expose interleaved memory layout like this:

 Early memory node ranges
   node   1: [mem 0x0000000000000000-0x000000011fffffff]
   node   2: [mem 0x0000000120000000-0x000000014fffffff]
   node   1: [mem 0x0000000150000000-0x00000001ffffffff]
   node   0: [mem 0x0000000200000000-0x000000048fffffff]
   node   2: [mem 0x0000000490000000-0x00000007ffffffff]

In that case, we can see memory blocks assigned to multiple nodes in
sysfs:

  $ ls -l /sys/devices/system/memory/memory21
  total 0
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node1 -> ../../node/node1
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node2 -> ../../node/node2
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 online
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
  drwxr-xr-x 2 root root     0 Aug 24 05:27 power
  -r--r--r-- 1 root root 65536 Aug 24 05:27 removable
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 state
  lrwxrwxrwx 1 root root     0 Aug 24 05:25 subsystem -> ../../../../bus/memory
  -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
  -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones

The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.

This is wrong but doesn't prevent the system to run.  However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:

  kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
  CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
  Call Trace:
    add_memory_resource+0x23c/0x340 (unreliable)
    __add_memory+0x5c/0xf0
    dlpar_add_lmb+0x1b4/0x500
    dlpar_memory+0x1f8/0xb80
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    vfs_write+0xe8/0x290
    ksys_write+0xdc/0x130
    system_call_exception+0x160/0x270
    system_call_common+0xf0/0x27c

This has been seen on PowerPC LPAR.

The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.

There are two issues here:

 (a) The sysfs memory and node's layouts are broken due to these
     multiple links

 (b) The link errors in link_mem_sections() should not lead to a system
     panic.

To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not.  This is addressed by the patches 1 and 2 of this
series.

Issue (b) will be addressed separately.

This patch (of 2):

The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.

Make it general to the hotplug operation and rename it as
meminit_context.

There is no functional change introduced by this patch

Suggested-by: David Hildenbrand 
Signed-off-by: Laurent Dufour 
Signed-off-by: Andrew Morton 
Reviewed-by: David Hildenbrand 
Reviewed-by: Oscar Salvador 
Acked-by: Michal Hocko 
Cc: Greg Kroah-Hartman 
Cc: "Rafael J . Wysocki" 
Cc: Nathan Lynch 
Cc: Scott Cheloha 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: 
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds

mm/gup: fix gup_fast with dynamic page table folding

2020-09-26T17:33:57+00:00

Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:

  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  ...
          pudp = pud_offset(&p4d, addr);

This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return.  This happens when the
level is folded (on most arches), and that pointer should not be
iterated.

On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.

Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:

  // addr = 0x1007ffff000, end = 0x10080001000
  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  {
        unsigned long next;
        pud_t *pudp;

        // pud_offset returns &p4d itself (a pointer to a value on stack)
        pudp = pud_offset(&p4d, addr);
        do {
                // on second iteratation reading "random" stack value
                pud_t pud = READ_ONCE(*pudp);

                // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
                next = pud_addr_end(addr, end);
                ...
        } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack

        return 1;
  }

This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").

s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.

What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.

To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions.  And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter.  This has
already been discussed in

  https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1

Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik 
Signed-off-by: Andrew Morton 
Reviewed-by: Gerald Schaefer 
Reviewed-by: Alexander Gordeev 
Reviewed-by: Jason Gunthorpe 
Reviewed-by: Mike Rapoport 
Reviewed-by: John Hubbard 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Michael Ellerman 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Dave Hansen 
Cc: Andy Lutomirski 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: Arnd Bergmann 
Cc: Andrey Ryabinin 
Cc: Heiko Carstens 
Cc: Christian Borntraeger 
Cc: Claudio Imbrenda 
Cc: 	[5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds

block: remove unused BLK_QC_T_EAGAIN flag

2020-09-25T13:54:50+00:00

commit 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE") removed the
REQ_NOWAIT_INLINE related code, but the diff wasn't applied to
blk_types.h somehow.

Then commit 2771cefeac49 ("block: remove the REQ_NOWAIT_INLINE flag")
removed the REQ_NOWAIT_INLINE flag while the BLK_QC_T_EAGAIN flag still
remains.

Fixes: 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE")
Signed-off-by: Jeffle Xu 
Signed-off-by: Jens Axboe

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-09-22T22:08:41+00:00

Pull vfs fixes from Al Viro:
 "No common topic, just assorted fixes"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fuse: fix the ->direct_IO() treatment of iov_iter
  fs: fix cast in fsparam_u32hex() macro
  vboxsf: Fix the check for the old binary mount-arguments struct

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-09-22T21:43:50+00:00

Pull networking fixes from Jakub Kicinski:

 - fix failure to add bond interfaces to a bridge, the offload-handling
   code was too defensive there and recent refactoring unearthed that.
   Users complained (Ido)

 - fix unnecessarily reflecting ECN bits within TOS values / QoS marking
   in TCP ACK and reset packets (Wei)

 - fix a deadlock with bpf iterator. Hopefully we're in the clear on
   this front now... (Yonghong)

 - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)

 - fix AQL on mt76 devices with FW rate control and add a couple of AQL
   issues in mac80211 code (Felix)

 - fix authentication issue with mwifiex (Maximilian)

 - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)

 - fix exception handling for multipath routes via same device (David
   Ahern)

 - revert back to a BH spin lock flavor for nsid_lock: there are paths
   which do require the BH context protection (Taehee)

 - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)

 - fix ife module load deadlock (Cong)

 - make an adjustment to netlink reply message type for code added in
   this release (the sole change touching uAPI here) (Michal)

 - a number of fixes for small NXP and Microchip switches (Vladimir)

[ Pull request acked by David: "you can expect more of this in the
  future as I try to delegate more things to Jakub" ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
  net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
  net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
  net: Update MAINTAINERS for MediaTek switch driver
  net/mlx5e: mlx5e_fec_in_caps() returns a boolean
  net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
  net/mlx5e: kTLS, Fix leak on resync error flow
  net/mlx5e: kTLS, Add missing dma_unmap in RX resync
  net/mlx5e: kTLS, Fix napi sync and possible use-after-free
  net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
  net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
  net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
  net/mlx5e: Fix endianness when calculating pedit mask first bit
  net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
  net/mlx5e: CT: Fix freeing ct_label mapping
  net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
  net/mlx5e: Use synchronize_rcu to sync with NAPI
  net/mlx5e: Use RCU to protect rq->xdp_prog
  ...