Pull RISC-V fixes from Palmer Dabbelt:

 - The CLINT driver has been split in two: one to handle the M-mode
   CLINT (memory mapped and used on NOMMU systems) and one to handle the
   S-mode CLINT (via SBI).

 - The addition of SiFive's drivers to rv32_defconfig

* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Add SiFive drivers to rv32_defconfig
  dt-bindings: timer: Add CLINT bindings
  RISC-V: Remove CLINT related code from timer and arch
  clocksource/drivers: Add CLINT timer driver
  RISC-V: Add mechanism to provide custom IPI operations

Pull ext4 updates from Ted Ts'o:
 "Improvements to ext4's block allocator performance for very large file
  systems, especially when the file system or files which are highly
  fragmented. There is a new mount option, prefetch_block_bitmaps which
  will pull in the block bitmaps and set up the in-memory buddy bitmaps
  when the file system is initially mounted.

  Beyond that, a lot of bug fixes and cleanups. In particular, a number
  of changes to make ext4 more robust in the face of write errors or
  file system corruptions"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
  ext4: limit the length of per-inode prealloc list
  ext4: reorganize if statement of ext4_mb_release_context()
  ext4: add mb_debug logging when there are lost chunks
  ext4: Fix comment typo "the the".
  jbd2: clean up checksum verification in do_one_pass()
  ext4: change to use fallthrough macro
  ext4: remove unused parameter of ext4_generic_delete_entry function
  mballoc: replace seq_printf with seq_puts
  ext4: optimize the implementation of ext4_mb_good_group()
  ext4: delete invalid comments near ext4_mb_check_limits()
  ext4: fix typos in ext4_mb_regular_allocator() comment
  ext4: fix checking of directory entry validity for inline directories
  fs: prevent BUG_ON in submit_bh_wbc()
  ext4: correctly restore system zone info when remount fails
  ext4: handle add_system_zone() failure in ext4_setup_system_zone()
  ext4: fold ext4_data_block_valid_rcu() into the caller
  ext4: check journal inode extents more carefully
  ext4: don't allow overlapping system zones
  ext4: handle error of ext4_setup_system_zone() on remount
  ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
  ...

We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e.
RISC-V NoMMU kernel).

The CLINT MMIO device provides three things:
1. 64bit free running counter register
2. 64bit per-CPU time compare registers
3. 32bit per-CPU inter-processor interrupt registers

Unlike other timer devices, CLINT provides IPI registers along with
timer registers. To use CLINT IPI registers, the CLINT timer driver
provides IPI related callbacks to arch/riscv.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne,
  me)"

* tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-pool: Only allocate from CMA when in same memory zone
  dma-pool: fix coherent pool allocations for IOMMU mappings

Pull ia64 page table fix from Mike Rapoport:
 "Fix regression in IA-64 caused by page table allocation refactoring

  The refactoring and consolidation of <asm/pgalloc.h> caused regression
  on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the
  fix ia64 got delayed a bit and here it is"

* tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  arch/ia64: Restore arch-specific pgd_offset_k implementation

Pull networking fixes from David Miller:
 "Another batch of fixes:

  1) Remove nft_compat counter flush optimization, it generates warnings
     from the refcount infrastructure. From Florian Westphal.

  2) Fix BPF to search for build id more robustly, from Jiri Olsa.

  3) Handle bogus getopt lengths in ebtables, from Florian Westphal.

  4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
     Oleksij Rempel.

  5) Reset iter properly on mptcp sendmsg() error, from Florian
     Westphal.

  6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.

  7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.

  8) Fix double unregister in bonding during namespace tear down, from
     Cong Wang.

  9) Disable RP filter during icmp_redirect selftest, from David Ahern"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  otx2_common: Use devm_kcalloc() in otx2_config_npa()
  net: qrtr: fix usage of idr in port assignment to socket
  selftests: disable rp_filter for icmp_redirect.sh
  Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
  phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
  mptcp: sendmsg: reset iter on error redux
  net: devlink: Remove overzealous WARN_ON with snapshots
  tipc: not enable tipc when ipv6 works as a module
  tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
  net: Fix potential wrong skb->protocol in skb_vlan_untag()
  net: xdp: pull ethernet header off packet after computing skb->protocol
  ipvlan: fix device features
  bonding: fix a potential double-unregister
  can: j1939: add rxtimer for multipacket broadcast session
  can: j1939: abort multipacket broadcast session when timeout occurs
  can: j1939: cancel rxtimer on multipacket broadcast session complete
  can: j1939: fix support for multipacket broadcast message
  net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
  net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
  net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
  ...

IA-64 is special and treats pgd_offset_k() differently to pgd_offset(),
using different formulae to calculate the indices into the kernel and user
PGDs.  The index into the user PGDs takes into account the region number,
but the index into the kernel (init_mm) PGD always assumes a predefined
kernel region number. Commit 974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which
incorrectly used pgd_index() for kernel page tables.  As a result, the
index into the kernel PGD was going out of bounds and the kernel hung
during early boot.

Allow overrides of pgd_offset_k() and override it on IA-64 with the old
implementation that will correctly index the kernel PGD.

Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>

Fix a kernel-doc warning for the pcs_config() function prototype:

../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config'

Fixes: 7137e18f6f88 ("net: phylink: add struct phylink_pcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Impose a limit on the number of watches that a user can hold so that
they can't use this mechanism to fill up all the available memory.

This is done by putting a counter in user_struct that's incremented when
a watch is allocated and decreased when it is released.  If the number
exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN.

This can be tested by the following means:

 (1) Create a watch queue and attach it to fd 5 in the program given - in
     this case, bash:

	keyctl watch_session /tmp/nlog /tmp/gclog 5 bash

 (2) In the shell, set the maximum number of files to, say, 99:

	ulimit -n 99

 (3) Add 200 keyrings:

	for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done

 (4) Try to watch all of the keyrings:

	for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done

     This should fail when the number of watches belonging to the user hits
     99.

 (5) Remove all the keyrings and all of those watches should go away:

	for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done

 (6) Kill off the watch queue by exiting the shell spawned by
     watch_session.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Endianness issue in IPv4 option support in nft_exthdr,
   from Stephen Suryaputra.

2) Removes the waitcount optimization in nft_compat,
   from Florian Westphal.

3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from
   Florian Westphal.

4) Memleak in chain binding support, also from Florian.

5) Simplify nft_flowtable.sh selftest, from Fabian Frederick.

6) Optional MTU arguments for selftest nft_flowtable.sh,
   also from Fabian.

7) Remove noise error report when killing process in
   selftest nft_flowtable.sh, from Fabian Frederick.

8) Reject bogus getsockopt option length in ebtables,
   from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>