Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for -rc4.

  The usual suspects of gadget, xhci, and dwc2/3 are in here, along with
  some reverts of reported problem changes, and a number of build
  documentation warning fixes. Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  Revert "cdc-acm: implement put_char() and flush_chars()"
  usb: Change usb_of_get_companion_dev() place to usb/common
  usb: xhci: fix interrupt transfer error happened on MTK platforms
  usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
  usb: misc: uss720: Fix two sleep-in-atomic-context bugs
  usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
  usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
  linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
  usb/typec: fix kernel-doc notation warning for typec_match_altmode
  usb: Don't die twice if PCI xhci host is not responding in resume
  usb: mtu3: fix error of xhci port id when enable U3 dual role
  usb: uas: add support for more quirk flags
  USB: Add quirk to support DJI CineSSD
  usb: typec: fix kernel-doc parameter warning
  usb/dwc3/gadget: fix kernel-doc parameter warning
  USB: yurex: Check for truncation in yurex_read()
  USB: yurex: Fix buffer over-read in yurex_write()
  usb: host: xhci-plat: Iterate over parent nodes for finding quirks
  xhci: Fix use after free for URB cancellation on a reallocated endpoint
  USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
  ...

Pull overlayfs fixes from Miklos Szeredi:
 "This fixes a regression in the recent file stacking update, reported
  and fixed by Amir Goldstein. The fix is fairly trivial, but involves
  adding a fadvise() f_op and the associated churn in the vfs. As
  discussed on -fsdevel, there are other possible uses for this method,
  than allowing proper stacking for overlays.

  And there's one other fix for a syzkaller detected oops"

* tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix oopses in ovl_fill_super() failure paths
  ovl: add ovl_fadvise()
  vfs: implement readahead(2) using POSIX_FADV_WILLNEED
  vfs: add the fadvise() file operation
  Documentation/filesystems: update documentation of file_operations
  ovl: fix GPF in swapfile_activate of file from overlayfs over xfs
  ovl: respect FIEMAP_FLAG_SYNC flag

Pull block fixes from Jens Axboe:
 "Three fixes that should go into this series. This contains:

   - Increase number of policies supported by blk-cgroup.

     With blk-iolatency, we now have four in kernel, but we had a hard
     limit of three...

   - Fix regression in null_blk, where the zoned supported broke
     queue_mode=0 (bio based).

   - NVMe pull request, with a single fix for an issue in the rdma code"

* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
  null_blk: fix zoned support for non-rq based operation
  blk-cgroup: increase number of supported policies
  nvmet-rdma: fix possible bogus dereference under heavy load

Jann Horn points out that the vmacache_flush_all() function is not only
potentially expensive, it's buggy too.  It also happens to be entirely
unnecessary, because the sequence number overflow case can be avoided by
simply making the sequence number be 64-bit.  That doesn't even grow the
data structures in question, because the other adjacent fields are
already 64-bit.

So simplify the whole thing by just making the sequence number overflow
case go away entirely, which gets rid of all the complications and makes
the code faster too.  Win-win.

[ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics
  also just goes away entirely with this ]

Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull PCI fixes from Bjorn Helgaas:

 - Add Tyrel Datwyler as maintainer for PPC64 RPA hotplug (Tyrel
   Datwyler)

 - Add Gustavo Pimentel as DesignWare PCI maintainer (Joao Pinto)

 - Fix a Switchtec Spectre v1 vulnerability (Gustavo A. R. Silva)

 - Revert an unnecessary Intel 300 ACS quirk (Mika Westerberg)

 - Fix pciehp hot-add/powerfault detection that left indicators in wrong
   state (Keith Busch)

 - Fix pci_reset_bus() logic error (Dennis Dalessandro)

 - Revert IB/hfi1 PCI reset change that caused a deadlock (Dennis
   Dalessandro)

 - Allow enabling PASID on Root Complex Integrated Endpoints (Felix
   Kuehling)

* tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Fix enabling of PASID on RC integrated endpoints
  IB/hfi1,PCI: Allow bus reset while probing
  PCI: Fix faulty logic in pci_reset_bus()
  PCI: pciehp: Fix hot-add vs powerfault detection order
  switchtec: Fix Spectre v1 vulnerability
  Revert "PCI: Add ACS quirk for Intel 300 series"
  MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer
  MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers

Pull networking fixes from David Miller:

 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
    and Florian Westphal.

 2) Memory leak in be2net driver, from Petr Oros.

 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.

 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.

 5) tipc_release() needs to orphan the sock, from Cong Wang.

 6) Need to program TxConfig register after TX/RX is enabled in r8169
    driver, not beforehand, from Maciej S. Szmigiero.

 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.

 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.

 9) syzbot can create conditions where kernel log is flooded with
    synflood warnings due to creation of many listening sockets, fix
    that. From Willem de Bruijn.

10) Fix RCU issues in rds socket layer, from Cong Wang.

11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
  nfp: flower: fix vlan match by checking both vlan id and vlan pcp
  tipc: check return value of __tipc_dump_start()
  s390/qeth: don't dump past end of unknown HW header
  s390/qeth: use vzalloc for QUERY OAT buffer
  s390/qeth: switch on SG by default for IQD devices
  s390/qeth: indicate error when netdev allocation fails
  rds: fix two RCU related problems
  r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
  erspan: fix error handling for erspan tunnel
  erspan: return PACKET_REJECT when the appropriate tunnel is not found
  tcp: rate limit synflood warnings further
  MIPS: lantiq: dma: add dev pointer
  netfilter: xt_hashlimit: use s->file instead of s->private
  netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
  netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
  netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
  netfilter: conntrack: reset tcp maxwin on re-register
  qmi_wwan: Support dynamic config on Quectel EP06
  ethernet: renesas: convert to SPDX identifiers
  ...

Calling into the new API to reset the secondary bus results in a deadlock.
This occurs because the device/bus is already locked at probe time.
Reverting back to the old behavior while the API is improved.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985
Fixes: c6a44ba950d1 ("PCI: Rename pci_try_reset_bus() to pci_reset_bus()")
Fixes: 409888e0966e ("IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>

Pull HID fixes from Jiri Kosina:

 - functional regression fix for sensor-hub driver from Hans de Goede

 - stop doing device reset for i2c-hid devices, which unbreaks some of
   them (and is in line with the specification), from Kai-Heng Feng

 - error handling fix for hid-core from Gustavo A. R. Silva

 - functional regression fix for some Elan panels from Benjamin
   Tissoires

 - a few new device ID additions and misc small fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: Don't reset device upon system resume
  HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report
  HID: core: fix NULL pointer dereference
  HID: core: fix grouping by application
  HID: multitouch: fix Elan panels with 2 input modes declaration
  HID: hid-saitek: Add device ID for RAT 7 Contagion
  HID: core: fix memory leak on probe
  HID: input: fix leaking custom input node name
  HID: add support for Apple Magic Keyboards
  HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreen
  HID: intel-ish-hid: Enable Sunrise Point-H ish driver

After merging the iolatency policy, we potentially now have 4 policies
being registered, but only support 3. This causes one of them to fail
loading. Takashi reports that BFQ no longer works for him, because it
fails to load due to policy registration failure.

Bump to 5 policies, and also add a warning for when we have exceeded
the global amount. If we have to touch this again, we should switch
to a dynamic scheme instead.

Reported-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull timekeeping fixes from Thomas Gleixner:
 "Two fixes for timekeeping:

   - Revert to the previous kthread based update, which is unfortunately
     required due to lock ordering issues. The removal caused boot
     failures on old Core2 machines. Add a proper comment why the thread
     needs to stay to prevent accidental removal in the future.

   - Fix a silly typo in a function declaration"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Revert "Remove kthread"
  timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()