Pull staging/IIO driver fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 3.18-rc7 that resolve a
  number of reported issues, and a new device id for a staging wireless
  driver.

  All of these have been in linux-next"

* tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Add new device ID for DLink GO-USB-N150
  staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd
  iio: accel: bmc150: set low default thresholds
  iio: accel: bmc150: Fix iio_event_spec direction
  iio: accel: bmc150: Send x, y and z motion separately
  iio: accel: bmc150: Error handling when mode set fails
  iio: gyro: bmg160: Fix iio_event_spec direction
  iio: gyro: bmg160: Send x, y and z motion separately
  iio: gyro: bmg160: Don't let interrupt mode to be open drain
  iio: gyro: bmg160: Error handling when mode set fails
  iio: adc: men_z188_adc: Add terminating entry for men_z188_ids
  iio: accel: kxcjk-1013: Fix kxcjk10013_set_range
  iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask

Jonathan writes:

Third set of IIO fixes for the 3.18 cycle.

Most of these are fairly standard little fixes, a bmc150 and bmg160 patch
is to make an ABI change to indicated a specific axis in an event rather
than the generic option in the original drivers.  As both of these drivers
are new in this cycle it would be ideal to push this minor change through
even though it isn't strictly a fix.  A couple of other 'fixes' change
defaults for some settings on these new drivers to more intuitive calues.
Looks like some useful feedback has been coming in for this driver
since it was applied.

* IIO_EVENT_CODE_EXTRACT_DIR bit mask was wrong and has been for a while
  0xCF clearly doesn't give a contiguous bitmask.
* kxcjk-1013 range setting was failing to mask out the previous value
  in the register and hence was 'enable only'.
* men_z188 device id table wasn't null terminated.
* bmg160 and bmc150 both failed to correctly handling an error in mode
  setting.
* bmg160 and bmc150 both had a bug in setting the event direction in the
  event spec (leads to an attribute name being incorrect)
* bmg160 defaulted to an open drain output for the interrupt - as a default
  this obviously only works with some interrupt chips - hence change the
  default to push-pull (note this is a new driver so we aren't going to
  cause any regressions with this change).
* bmc150 had an unintuitive default for the rate of change (motion detector)
  so change it to 0 (new driver so change of default won't cause any
  regressions).

This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull powerpc fixes from Ben Herrenschmidt:
 "This series fix a nasty issue with radeon adapters on powerpc servers,
  it's all CC'ed stable and has the relevant maintainers ack's/reviews.

  Basically, some (radeon) adapters have issues with MSI addresses above
  1T (only support 40-bits).  We had powerpc specific quirk but it only
  listed a specific revision of an adapter that we shipped with our
  machines and didn't properly handle the audio function which some
  distros enable nowadays.

  So we made the quirk generic and fixed both the graphic and audio
  drivers properly to use it.

  Without that, ppc64 server machines will crash at boot with a radeon
  adapter.

  Note: This has been brewing for a while, it just needed a last respin
  which got delayed due to us moving ozlabs to a new location in town
  and other such things taking priority"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Remove unused force_32bit_msi quirk
  powerpc/pseries: Honor the generic "no_64bit_msi" flag
  powerpc/powernv: Honor the generic "no_64bit_msi" flag
  sound/radeon: Move 64-bit MSI quirk from arch to driver
  gpu/radeon: Set flag to indicate broken 64-bit MSI
  PCI/MSI: Add device flag indicating that 64-bit MSIs don't work
  ALSA: hda - Limit 40bit DMA for AMD HDMI controllers

Pull clock fixes from Mike Turquette:
 "The fixes for the clock framework are all regressions in drivers, plus
  a single fix in one of the basic clock templates.  No fixes to the
  core this time around.

  As with most clock driver fixes these run the gamut from fixing a
  build warning to fixing wrecked memory timings, with a little USB
  tossed in for fun"

* tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux:
  clk: pxa: fix pxa27x CCCR bit usage
  clk-divider: Fix READ_ONLY when divider > 1
  clk: qcom: Fix duplicate rbcpr clock name
  clk: at91: usb: fix at91sam9x5 recalc, round and set rate
  clk: at91: usb: fix at91rm9200 round and set rate

This can be set by quirks/drivers to be used by the architecture code
that assigns the MSI addresses.

We additionally add verification in the core MSI code that the values
assigned by the architecture do satisfy the limitation in order to fail
gracefully if they don't (ie. the arch hasn't been updated to deal with
that quirk yet).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Pull percpu fix from Tejun Heo:
 "This contains one patch to fix a race condition which can lead to
  percpu_ref using a percpu pointer which is corrupted with a set DEAD
  bit.  The bug was introduced while separating out the ATOMIC mode flag
  from the DEAD flag.  The fix is pretty straight forward.

  I just committed the patch to the percpu tree but am sending out the
  pull request early as I'll be on vacation for a week.  The patch
  should be fairly safe and while the latency will be higher I'll be
  checking emails"

* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu-ref: fix DEAD flag contamination of percpu pointer

While decoupling ATOMIC and DEAD flags, f47ad4578461 ("percpu_ref:
decouple switching to percpu mode and reinit") updated
__ref_is_percpu() so that it only tests ATOMIC flag to determine
whether the ref is in percpu mode or not; however, while DEAD implies
ATOMIC, the two flags are set separately during percpu_ref_kill() and
if __ref_is_percpu() races percpu_ref_kill(), it may see DEAD w/o
ATOMIC.  Because __ref_is_percpu() returns @ref->percpu_count_ptr
value verbatim as the percpu pointer after testing ATOMIC, the pointer
may now be contaminated with the DEAD flag.

This can be fixed by clearing the flag bits before returning the
pointer which was the fix proposed by Shaohua; however, as DEAD
implies ATOMIC, we can just test for both flags at once and avoid the
explicit masking.

Update __ref_is_percpu() so that it tests that both ATOMIC and DEAD
are clear before returning @ref->percpu_count_ptr as the percpu
pointer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Reviewed-by: Shaohua Li <shli@kernel.org>
Link: http://lkml.kernel.org/r/995deb699f5b873c45d667df4add3b06f73c2c25.1416638887.git.shli@kernel.org
Fixes: f47ad4578461 ("percpu_ref: decouple switching to percpu mode and reinit")

Pull networking fixes from David Miller:

 1) Fix BUG when decrypting empty packets in mac80211, from Ronald Wahl.

 2) nf_nat_range is not fully initialized and this is copied back to
    userspace, from Daniel Borkmann.

 3) Fix read past end of b uffer in netfilter ipset, also from Dan
    Carpenter.

 4) Signed integer overflow in ipv4 address mask creation helper
    inet_make_mask(), from Vincent BENAYOUN.

 5) VXLAN, be2net, mlx4_en, and qlcnic need ->ndo_gso_check() methods to
    properly describe the device's capabilities, from Joe Stringer.

 6) Fix memory leaks and checksum miscalculations in openvswitch, from
    Pravin B SHelar and Jesse Gross.

 7) FIB rules passes back ambiguous error code for unreachable routes,
    making behavior confusing for userspace.  Fix from Panu Matilainen.

 8) ieee802154fake_probe() doesn't release resources properly on error,
    from Alexey Khoroshilov.

 9) Fix skb_over_panic in add_grhead(), from Daniel Borkmann.

10) Fix access of stale slave pointers in bonding code, from Nikolay
    Aleksandrov.

11) Fix stack info leak in PPP pptp code, from Mathias Krause.

12) Cure locking bug in IPX stack, from Jiri Bohac.

13) Revert SKB fclone memory freeing optimization that is racey and can
    allow accesses to freed up memory, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (71 commits)
  tcp: Restore RFC5961-compliant behavior for SYN packets
  net: Revert "net: avoid one atomic operation in skb_clone()"
  virtio-net: validate features during probe
  cxgb4 : Fix DCB priority groups being returned in wrong order
  ipx: fix locking regression in ipx_sendmsg and ipx_recvmsg
  openvswitch: Don't validate IPv6 label masks.
  pptp: fix stack info leak in pptp_getname()
  brcmfmac: don't include linux/unaligned/access_ok.h
  cxgb4i : Don't block unload/cxgb4 unload when remote closes TCP connection
  ipv6: delete protocol and unregister rtnetlink when cleanup
  net/mlx4_en: Add VXLAN ndo calls to the PF net device ops too
  bonding: fix curr_active_slave/carrier with loadbalance arp monitoring
  mac80211: minstrel_ht: fix a crash in rate sorting
  vxlan: Inline vxlan_gso_check().
  can: m_can: update to support CAN FD features
  can: m_can: fix incorrect error messages
  can: m_can: add missing delay after setting CCCR_INIT bit
  can: m_can: fix not set can_dlc for remote frame
  can: m_can: fix possible sleep in napi poll
  can: m_can: add missing message RAM initialization
  ...

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: two NUMA fixes, two cputime fixes and an RCU/lockdep fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency
  sched/cputime: Fix cpu_timer_sample_group() double accounting
  sched/numa: Avoid selecting oneself as swap target
  sched/numa: Fix out of bounds read in sched_init_numa()
  sched: Remove lockdep check in sched_move_task()