Pull irq fixes from Thomas Gleixner:
 "This udpate delivers:

   - A fix for dynamic interrupt allocation on x86 which is required to
     exclude the GSI interrupts from the dynamic allocatable range.

     This was detected with the newfangled tablet SoCs which have GPIOs
     and therefor allocate a range of interrupts.  The MSI allocations
     already excluded the GSI range, so we never noticed before.

   - The last missing set_irq_affinity() repair, which was delayed due
     to testing issues

   - A few bug fixes for the armada SoC interrupt controller

   - A memory allocation fix for the TI crossbar interrupt controller

   - A trivial kernel-doc warning fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: irq-crossbar: Not allocating enough memory
  irqchip: armanda: Sanitize set_irq_affinity()
  genirq: x86: Ensure that dynamic irq allocation does not conflict
  linux/interrupt.h: fix new kernel-doc warnings
  irqchip: armada-370-xp: Fix releasing of MSIs
  irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
  irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable

Pull ftrace bugfix from Steven Rostedt:
 "Takao Indoh reported that he was able to cause a ftrace bug while
  loading a module and enabling function tracing at the same time.

  He uncovered a race where the module when loaded will convert the
  calls to mcount into nops, and expects the module's text to be RW.
  But when function tracing is enabled, it will convert all kernel text
  (core and module) from RO to RW to convert the nops to calls to ftrace
  to record the function.  After the convertion, it will convert all the
  text back from RW to RO.

  The issue is, it will also convert the module's text that is loading.
  If it converts it to RO before ftrace does its conversion, it will
  cause ftrace to fail and require a reboot to fix it again.

  This patch moves the ftrace module update that converts calls to
  mcount into nops to be done when the module state is still
  MODULE_STATE_UNFORMED.  This will ignore the module when the text is
  being converted from RW back to RO"

* tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/module: Hardcode ftrace_module_init() call into load_module()

Pull devicetree bug fixes from Grant Likely:
 "These are some important bug fixes that need to get into v3.15.

  This branch contains a pair of important bug fixes for the DT code:

   - Fix some incorrect binding property names before they enter common
     usage

   - Fix bug where some platform devices will be unable to get their
     interrupt number when they depend on an interrupt controller that
     is not available at device creation time.  This is a problem
     causing mainline to fail on a number of ARM platforms"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  of/irq: do irq resolution in platform_get_irq
  of: selftest: add deferred probe interrupt test
  dt: Fix binding typos in clock-names and interrupt-names

A race exists between module loading and enabling of function tracer.

	CPU 1				CPU 2
	-----				-----
  load_module()
   module->state = MODULE_STATE_COMING

				register_ftrace_function()
				 mutex_lock(&ftrace_lock);
				 ftrace_startup()
				  update_ftrace_function();
				   ftrace_arch_code_modify_prepare()
				    set_all_module_text_rw();
				   <enables-ftrace>
				    ftrace_arch_code_modify_post_process()
				     set_all_module_text_ro();

				[ here all module text is set to RO,
				  including the module that is
				  loading!! ]

   blocking_notifier_call_chain(MODULE_STATE_COMING);
    ftrace_init_module()

     [ tries to modify code, but it's RO, and fails!
       ftrace_bug() is called]

When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.

The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.

The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.

Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com

Reported-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

On x86 the allocation of irq descriptors may allocate interrupts which
are in the range of the GSI interrupts. That's wrong as those
interrupts are hardwired and we don't have the irq domain translation
like PPC. So one of these interrupts can be hooked up later to one of
the devices which are hard wired to it and the io_apic init code for
that particular interrupt line happily reuses that descriptor with a
completely different configuration so hell breaks lose.

Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs,
except for a few usage sites which have not yet blown up in our face
for whatever reason. But for drivers which need an irq range, like the
GPIO drivers, we have no limit in place and we don't want to expose
such a detail to a driver.

To cure this introduce a function which an architecture can implement
to impose a lower bound on the dynamic interrupt allocations.

Implement it for x86 and set the lower bound to nr_gsi_irqs, which is
the end of the hardwired interrupt space, so all dynamic allocations
happen above.

That not only allows the GPIO driver to work sanely, it also protects
the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and
htirq code. They need to be cleaned up as well, but that's a separate
issue.

Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Krogerus Heikki <heikki.krogerus@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Fix new kernel-doc warnings in <linux/interrupt.h>:

Warning(include/linux/interrupt.h:219): No description found for parameter 'cpumask'
Warning(include/linux/interrupt.h:219): Excess function parameter 'mask' description in 'irq_set_affinity'
Warning(include/linux/interrupt.h:236): No description found for parameter 'cpumask'
Warning(include/linux/interrupt.h:236): Excess function parameter 'mask' description in 'irq_force_affinity'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/535DD2FD.7030804@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull irq fixes from Thomas Gleixner:
 "A slighlty large fix for a subtle issue in the CPU hotplug code of
  certain ARM SoCs, where the not yet online cpu needs to setup the cpu
  local timer and needs to set the interrupt affinity to itself.
  Setting interrupt affinity to a not online cpu is prohibited and
  therefor the timer interrupt ends up on the wrong cpu, which leads to
  nasty complications.

  The SoC folks tried to hack around that in the SoC code in some more
  than nasty ways.  The proper solution is to have a way to enforce the
  affinity setting to a not online cpu.  The core patch to the genirq
  code provides that facility and the follow up patches make use of it
  in the GIC interrupt controller and the exynos timer driver.

  The change to the core code has no implications to existing users,
  except for the rename of the locked function and therefor the
  necessary fixup in mips/cavium.  Aside of that, no runtime impact is
  possible, as none of the existing interrupt chips implements anything
  which depends on the force argument of the irq_set_affinity()
  callback"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Exynos_mct: Register clock event after request_irq()
  clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
  irqchip: Gic: Support forced affinity setting
  genirq: Allow forcing cpu affinity of interrupts

Pull tty/serial fixes from Greg KH:
 "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of
  reported issues in the 8250 and samsung serial drivers, as well as a
  character loss fix for the tty core that was caused by the lock
  removal patches a release ago"

* tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial_core: fix uart PORT_UNKNOWN handling
  serial: samsung: Change barrier() to cpu_relax() in console output
  serial: samsung: don't check config for every character
  serial: samsung: Use the passed in "port", fixing kgdb w/ no console
  serial: 8250: Fix thread unsafe __dma_tx_complete function
  8250_core: Fix unwanted TX chars write
  tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 3.15-rc3.  The majority are gadget
  fixes, as we didn't get any of those in for 3.15-rc2.  The others are
  all over the place, and there's a number of new device id addtions as
  well."

* tag 'usb-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: option: add and update a number of CMOTech devices
  usb: option: add Alcatel L800MA
  usb: option: add Olivetti Olicard 500
  usb: qcserial: add Sierra Wireless MC7305/MC7355
  usb: qcserial: add Sierra Wireless MC73xx
  usb: qcserial: add Sierra Wireless EM7355
  USB: io_ti: fix firmware download on big-endian machines
  usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
  xhci: extend quirk for Renesas cards
  xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  phy: fix kernel oops in phy_lookup()
  phy: restore OMAP_CONTROL_PHY dependencies
  phy: exynos: fix building as a module
  USB: serial: fix sysfs-attribute removal deadlock
  usb: wusbcore: fix panic in wusbhc_chid_set
  usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq
  uwb: don't call spin_unlock_irq in a USB completion handler
  usb: chipidea: coordinate usb phy initialization for different phy type
  ...

Pull file locking fixes from Jeff Layton:
 "File locking related bugfixes for v3.15 (pile #2)

   - fix for a long-standing bug in __break_lease that can cause soft
     lockups
   - renaming of file-private locks to "open file description" locks,
     and the command macros to more visually distinct names

  The fix for __break_lease is also in the pile of patches for which
  Bruce sent a pull request, but I assume that your merge procedure will
  handle that correctly.

  For the other patches, I don't like the fact that we need to rename
  this stuff at this late stage, but it should be settled now
  (hopefully)"

* tag 'locks-v3.15-2' of git://git.samba.org/jlayton/linux:
  locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" instead
  locks: rename file-private locks to "open file description locks"
  locks: allow __break_lease to sleep even when break_time is 0