* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Minix: Clean up left over label
  fix truncate inode time modification breakage
  fix setattr error handling in sysfs, configfs
  fcntl: return -EFAULT if copy_to_user fails
  wrong type for 'magic' argument in simple_fill_super()
  fix the deadlock in qib_fs
  mqueue doesn't need make_bad_inode()

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix bne2 "gave up waiting for init of module libcrc32c"
  module: verify_export_symbols under the lock
  module: move find_module check to end
  module: make locking more fine-grained.
  module: Make module sysfs functions private.
  module: move sysfs exposure to end of load_module
  module: fix kdb's illicit use of struct module_use.
  module: Make the 'usage' lists be two-way

These were placed in the header in ef665c1a06 to get the various
SYSFS/MODULE config combintations to compile.

That may have been necessary then, but it's not now.  These functions
are all local to module.c.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <randy.dunlap@oracle.com>

Linus changed the structure, and luckily this didn't compile any more.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>

When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.

It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".

In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module.  But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.

By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: Make intc messages consistent via pr_fmt.
  sh: make sure static declaration on ms7724se
  sh: make sure static declaration on mach-migor
  sh: make sure static declaration on mach-ecovec24
  sh: make sure static declaration on mach-ap325rxa
  clocksource: sh_cmt: compute mult and shift before registration
  clocksource: sh_tmu: compute mult and shift before registration
  sh: PIO disabling for x3proto and urquell.
  sh: mach-sdk7786: conditionally disable PIO support.
  sh: support for platforms without PIO.
  usb: r8a66597-hcd pio to mmio accessor conversion.
  usb: gadget: r8a66597-udc pio to mmio accessor conversion.
  usb: gadget: m66592-udc pio to mmio accessor conversion.
  sh: add romImage MMCIF boot for sh7724 and Ecovec V2
  sh: add boot code to MMCIF driver header
  sh: prepare MMCIF driver header file
  sh: allow romImage data between head.S and the zero page
  sh: Add support MMCIF for ecovec
  sh: remove duplicated #include
  input: serio: disable i8042 for non-cayman sh platforms.
  ...

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (83 commits)
  i7core_edac: Better describe the supported devices
  Add support for Westmere to i7core_edac driver
  i7core_edac: don't free on success
  i7core_edac: Add support for X5670
  Always call i7core_[ur]dimm_check_mc_ecc_err
  i7core_edac: fix memory leak of i7core_dev
  EDAC: add __init to i7core_xeon_pci_fixup
  i7core_edac: Fix wrong device id for channel 1 devices
  i7core: add support for Lynnfield alternate address
  i7core_edac: Add initial support for Lynnfield
  i7core_edac: do not export static functions
  edac: fix i7core build
  edac: i7core_edac produces undefined behaviour on 32bit
  i7core_edac: Use a more generic approach for probing PCI devices
  i7core_edac: PCI device is called NONCORE, instead of NOCORE
  i7core_edac: Fix ringbuffer maxsize
  i7core_edac: First store, then increment
  i7core_edac: Better parse "any" addrmask
  i7core_edac: Use a lockless ringbuffer
  edac: Create an unique instance for each kobj
  ...

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (27 commits)
  block: make blk_init_free_list and elevator_init idempotent
  block: avoid unconditionally freeing previously allocated request_queue
  pipe: change /proc/sys/fs/pipe-max-pages to byte sized interface
  pipe: change the privilege required for growing a pipe beyond system max
  pipe: adjust minimum pipe size to 1 page
  block: disable preemption before using sched_clock()
  cciss: call BUG() earlier
  Preparing 8.3.8rc2
  drbd: Reduce verbosity
  drbd: use drbd specific ratelimit instead of global printk_ratelimit
  drbd: fix hang on local read errors while disconnected
  drbd: Removed the now empty w_io_error() function
  drbd: removed duplicated #includes
  drbd: improve usage of MSG_MORE
  drbd: need to set socket bufsize early to take effect
  drbd: improve network latency, TCP_QUICKACK
  drbd: Revert "drbd: Create new current UUID as late as possible"
  brd: support discard
  Revert "writeback: fix WB_SYNC_NONE writeback from umount"
  Revert "writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync"
  ...

task_struct->pesonality is "unsigned int", but sys_personality() paths use
"unsigned long pesonality".  This means that every assignment or
comparison is not right.  In particular, if this argument does not fit
into "unsigned int" __set_personality() changes the caller's personality
and then sys_personality() returns -EINVAL.

Turn this argument into "unsigned int" and avoid overflows.  Obviously,
this is the user-visible change, we just ignore the upper bits.  But this
can't break the sane application.

There is another thing which can confuse the poorly written applications.
User-space thinks that this syscall returns int, not long.  This means
that the returned value can be negative and look like the error code.  But
note that libc won't be confused and thus errno won't be set, and with
this patch the user-space can never get -1 unless sys_personality() really
fails.  And, most importantly, the negative RET != -1 is only possible if
that app previously called personality(RET).

Pointed-out-by: Wenming Zhang <wezhang@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's used to superblock ->s_magic, which is unsigned long.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reviewed-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
CC: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>