In struct usb_function, the struct usb_function_instance pointer
variable "fi" is listed as const, but it is written to in numerous
places, making the const marking of it a total lie.  Fix this up by just
removing the const pointer attribute as this is modified in numerous
places.

Link: https://lore.kernel.org/r/2025052145-undress-puma-f7cf@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the case of handling a USB bus reset, the xhci_discover_or_reset_device
can run without first notifying the xHCI sideband client driver to stop or
prevent the use of the transfer ring.  It was seen that when a bus reset
situation happened, the USB offload driver was attempting to fetch the xHCI
transfer ring information, which was already freed.

Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-6-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some clients may operate only on a specific XHCI interrupter instance.
Allow for the associated class driver to request for the interrupter that
it requires.

Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-4-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce XHCI sideband, which manages the USB endpoints being requested by
a client driver.  This is used for when client drivers are attempting to
offload USB endpoints to another entity for handling USB transfers.  XHCI
sec intr will allow for drivers to fetch the required information about the
transfer ring, so the user can submit transfers independently.  Expose the
required APIs for drivers to register and request for a USB endpoint and to
manage XHCI secondary interrupters.

Driver renaming, multiple ring segment page linking, proper endpoint clean
up, and allowing module compilation added by Wesley Cheng to complete
original concept code by Mathias Nyman.

Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  6.15-rc1. Included in here are:

   - Thunderbolt driver and core api updates for new hardware and
     features

   - usb-storage const array cleanups

   - typec driver updates

   - dwc3 driver updates

   - xhci driver updates and bugfixes

   - small USB documentation updates

   - usb cdns3 driver updates

   - usb gadget driver updates

   - other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
  thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
  thunderbolt: Scan retimers after device router has been enumerated
  usb: host: cdns3: forward lost power information to xhci
  usb: host: xhci-plat: allow upper layers to signal power loss
  usb: xhci: change xhci_resume() parameters to explicit the desired info
  usb: cdns3-ti: run HW init at resume() if HW was reset
  usb: cdns3-ti: move reg writes to separate function
  usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
  usb: cdns3: rename hibernated argument of role->resume() to lost_power
  usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
  usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
  usb: dwc3: Don't use %pK through printk
  usb: core: Don't use %pK through printk
  usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
  dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
  usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
  usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
  usb: xhci: Don't change the status of stalled TDs on failed Stop EP
  xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
  xhci: Handle spurious events on Etron host isoc enpoints
  ...

otg_ulpi_create() has been unused since 2022's
commit 8ca79aaad8be ("ARM: pxa: remove unused pxa3xx-ulpi")

Remove it.

The devm_ variant is still used.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250223160602.91916-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Upcoming changes will add a USB host (and later gadget) driver for the
MCTP-over-USB protocol. Add a header that provides common definitions
for protocol support: the packet header format and a few framing
definitions. Add a define for the MCTP class code, as per
https://usb.org/defined-class-codes.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-1-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.

Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

'struct musb_fifo_cfg' are not modified in these drivers.

Constifying these structures moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
  64381	   5537	    202	  70120	  111e8	drivers/usb/musb/musb_core.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
  64957	   4929	    202	  70088	  111c8	drivers/usb/musb/musb_core.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/26e6f3e25dc8e785d0034dd7e59918e455563e60.1737234596.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.

Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.

Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>