Peter writes:

- Some improvments for ci_hdrc_usb2.c
- Support imx7d USB charger
- Add software sg support for UDC
- Enable user trigger role switch

* tag 'usb-ci-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: chipidea: Enable user-space triggered role-switching
  usb: chipidea: udc: add software sg list support
  usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp
  usb: chipidea: pull down dp for possible charger detection operation
  usb: chipidea: introduce imx7d USB charger detection
  usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use
  usb: chipidea: usb2: remove unneeded semicolon
  usb: chipidea: allow disabling glue drivers if EMBEDDED
  usb: chipidea: usb2: absorb zevio glue driver
  usb: chipidea: usb2: make clock optional
  usb: chipidea: usb2: fix formatting
  usb: chipidea: usb2: constify zynq_pdata
  usb: chipidea: core: show the real pointer value for register
  usb: chipidea: core: refine the description for this driver
  usb: chipidea: udc: fix the kernel doc for udc.h

Felipe writes:

USB: changes for v5.8 merge window

Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.

Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.

Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  usb: dwc3: gadget: Check for prepared TRBs
  usb: gadget: Fix issue with config_ep_by_speed function
  usb: cdns3: ep0: delete the redundant status stage
  usb: dwc2: Update Core Reset programming flow.
  usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
  usb: gadget: fix potential double-free in m66592_probe.
  usb: cdns3: Fix runtime PM imbalance on error
  usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  USB: dummy-hcd: use configurable endpoint naming scheme
  usb: cdns3: gadget: assign interrupt number to USB gadget structure
  usb: gadget: core: sync interrupt before unbind the udc
  arm64: dts: qcom: sc7180: Add interconnect properties for USB
  arm64: dts: qcom: sdm845: Add interconnect properties for USB
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  ARM: dts: at91: Remove the USB EP child node
  dt-bindings: usb: atmel: Mark EP child node as deprecated
  ...

This patch adds new config_ep_by_speed_and_alt function which
extends the config_ep_by_speed about alt parameter.
This additional parameter allows to find proper usb_ss_ep_comp_descriptor.

Problem has appeared during testing f_tcm (BOT/UAS) driver function.

f_tcm function for SS use array of headers for both  BOT/UAS alternate
setting:

static struct usb_descriptor_header *uasp_ss_function_desc[] = {
        (struct usb_descriptor_header *) &bot_intf_desc,
        (struct usb_descriptor_header *) &uasp_ss_bi_desc,
        (struct usb_descriptor_header *) &bot_bi_ep_comp_desc,
        (struct usb_descriptor_header *) &uasp_ss_bo_desc,
        (struct usb_descriptor_header *) &bot_bo_ep_comp_desc,

        (struct usb_descriptor_header *) &uasp_intf_desc,
        (struct usb_descriptor_header *) &uasp_ss_bi_desc,
        (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc,
        (struct usb_descriptor_header *) &uasp_bi_pipe_desc,
        (struct usb_descriptor_header *) &uasp_ss_bo_desc,
        (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc,
        (struct usb_descriptor_header *) &uasp_bo_pipe_desc,
        (struct usb_descriptor_header *) &uasp_ss_status_desc,
        (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc,
        (struct usb_descriptor_header *) &uasp_status_pipe_desc,
        (struct usb_descriptor_header *) &uasp_ss_cmd_desc,
        (struct usb_descriptor_header *) &uasp_cmd_comp_desc,
        (struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
        NULL,
};

The first 5 descriptors are associated with BOT alternate setting,
and others are associated with UAS.

During handling UAS alternate setting f_tcm driver invokes
config_ep_by_speed and this function sets incorrect companion endpoint
descriptor in usb_ep object.

Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this
case set ep->comp_desc to uasp_ss_bi_desc.

This is due to the fact that it searches endpoint based on endpoint
address:

        for_each_ep_desc(speed_desc, d_spd) {
                chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
                if (chosen_desc->bEndpoitAddress == _ep->address)
                        goto ep_found;
        }

And in result it uses the descriptor from BOT alternate setting
instead UAS.

Finally, it causes that controller driver during enabling endpoints
detect that just enabled endpoint for bot.

Signed-off-by: Jayshri Pawar <jpawar@cadence.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

The threaded interrupt handler may still be called after the
usb_gadget_disconnect is called, it causes the structures used
at interrupt handler was freed before it uses, eg the
usb_request. This issue usually occurs we remove the udc function
during the transfer. Below is the example when doing stress
test for android switch function, the EP0's request is freed
by .unbind (configfs_composite_unbind -> composite_dev_cleanup),
but the threaded handler accesses this request during handling
setup packet request.

In fact, there is no protection between unbind the udc
and udc interrupt handling, so we have to avoid the interrupt
handler is occurred or scheduled during the .unbind flow.

init: Sending signal 9 to service 'adbd' (pid 18077) process group...
android_work: did not send uevent (0 0 000000007bec2039)
libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 6ms
init: Service 'adbd' (pid 18077) received signal 9
init: Sending signal 9 to service 'adbd' (pid 18077) process group...
libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 0ms
init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:14)
init: Received control message 'start' for 'adbd' from pid: 399 (/vendor/bin/hw/android.hardware.usb@1.

init: starting service 'adbd'...
read descriptors
read strings
Unable to handle kernel read from unreadable memory at virtual address 000000000000002a
android_work: sent uevent USB_STATE=CONNECTED
Mem abort info:
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e97f1000
using random self ethernet address
[000000000000002a] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 232 Comm: irq/68-5b110000 Not tainted 5.4.24-06075-g94a6b52b5815 #92
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 00400085 (nzcv daIf +PAN -UAO)
using random host ethernet address
pc : composite_setup+0x5c/0x1730
lr : android_setup+0xc0/0x148
sp : ffff80001349bba0
x29: ffff80001349bba0 x28: ffff00083a50da00
x27: ffff8000124e6000 x26: ffff800010177950
x25: 0000000000000040 x24: ffff000834e18010
x23: 0000000000000000 x22: 0000000000000000
x21: ffff00083a50da00 x20: ffff00082e75ec40
x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fb58 x10: 0000000000000040
x9 : ffff8000120fc980 x8 : 0000000000000000
x7 : ffff00083f98df50 x6 : 0000000000000100
x5 : 00000307e8978431 x4 : ffff800011386788
x3 : 0000000000000000 x2 : ffff800012342000
x1 : 0000000000000000 x0 : ffff800010c6d3a0
Call trace:
 composite_setup+0x5c/0x1730
 android_setup+0xc0/0x148
 cdns3_ep0_delegate_req+0x64/0x90
 cdns3_check_ep0_interrupt_proceed+0x384/0x738
 cdns3_device_thread_irq_handler+0x124/0x6e0
 cdns3_thread_irq+0x94/0xa0
 irq_thread_fn+0x30/0xa0
 irq_thread+0x150/0x248
 kthread+0xfc/0x128
 ret_from_fork+0x10/0x18
Code: 910e8000 f9400693 12001ed7 79400f79 (3940aa61)
---[ end trace c685db37f8773fba ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

To take advantage of DWC3 internal TRB prefetch and cache for
performance, inform the controller the last request with stream_id
before switching to a different stream transfer. This allows the
controller to maintain its transfer burst within the stream ID.

Introduce the usb-request is_last field to help inform the DWC3
controller of this.

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

usb_hcd_pci_probe expects users to call this with driver_data set as
hc_driver, that limits the possibility of using the driver_data for
driver data.

Add hc_driver as argument to usb_hcd_pci_probe and modify the callers
ehci/ohci/xhci/uhci to pass hc_driver as argument and freeup the
driver_data used

Tested xhci driver on Dragon-board RB3, compile tested ehci, ohci and
uhci.

[For all but the xHCI parts]
[For the xhci part]

Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-2-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function that converts orientation string into orientation
value.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200507150900.12102-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some vendors glue layer need to handle some events for vbus, eg,
some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event
to handle charger detection, its charger detection is finished at
glue layer code, but not at USB PHY driver.

Signed-off-by: Peter Chen <peter.chen@nxp.com>

The USB LANGID validation code in "check_user_usb_string" function is
moved to "usb_validate_langid" function which can be used by other usb
gadget drivers.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

Pull sound updates from Takashi Iwai:
 "This became again a busy development cycle.  There are few ALSA core
  updates (merely API cleanups and sparse fixes), with the majority of
  other changes are found in ASoC scene.

  Here are some highlights:

  ALSA core:
   - More helper macros for sparse warning fixes (e.g. bitwise types)
   - Slight optimization of PCM OSS locks
   - Make common handling for PCM / compress buffers (for SOF)

  ASoC:
   - Lots of code refactoring and modernization for (still ongoing)
     componentization works
   - Conversion of SND_SOC_ALL_CODECS to use imply
   - Continued refactoring and fixing of the Intel SOF/SST support,
     including the initial (but still incomplete) SoundWire support
   - SoundWire and more advanced clocking support for Realtek RT5682
   - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
     DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
     and TLV320ADCX140

  HD-audio:
   - Optimizations in HDMI jack handling
   - A few new quirks and fixups for Realtek codecs

  USB-audio:
   - Delayed registration support
   - New quirks for Motu, Kingston, Presonus"

* tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
  ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor
  Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
  ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
  ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
  ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
  ALSA: hda/realtek - a fake key event is triggered by running shutup
  ALSA: hda: default enable CA0132 DSP support
  ASoC: amd: acp3x-pcm-dma: clean up two indentation issues
  ASoC: tlv320adcx140: Remove undocumented property
  ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function
  ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
  ASoC: Intel: boards: add sof_sdw machine driver
  ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms
  ASoC: rt5682: move DAI clock registry to I2S mode
  ASoC: pxa: magician: convert to use i2c_new_client_device()
  ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities
  Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
  ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
  ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks
  ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers
  ...