Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB merge for 3.9-rc1

  Nothing major, lots of gadget fixes, and of course, xhci stuff.

  All of this has been in linux-next for a while, with the exception of
  the last 3 patches, which were reverts of patches in the tree that
  caused problems, they went in yesterday."

* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
  Revert "USB: EHCI: make ehci-vt8500 a separate driver"
  Revert "USB: EHCI: make ehci-orion a separate driver"
  Revert "USB: update host controller Kconfig entries"
  USB: update host controller Kconfig entries
  USB: EHCI: make ehci-orion a separate driver
  USB: EHCI: make ehci-vt8500 a separate driver
  USB: usb-storage: unusual_devs update for Super TOP SATA bridge
  USB: ehci-omap: Fix autoloading of module
  USB: ehci-omap: Don't free gpios that we didn't request
  USB: option: add Huawei "ACM" devices using protocol = vendor
  USB: serial: fix null-pointer dereferences on disconnect
  USB: option: add Yota / Megafon M100-1 4g modem
  drivers/usb: add missing GENERIC_HARDIRQS dependencies
  USB: storage: properly handle the endian issues of idProduct
  testusb: remove all mentions of 'usbfs'
  usb: gadget: imx_udc: make it depend on BROKEN
  usb: omap_control_usb: fix compile warning
  ARM: OMAP: USB: Add phy binding information
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: devices: create device for usb part of control module
  ...

These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.

These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.

Note that this branch will conflict with c1d1cd597fc7
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.

[arnd - resolved the merge conflict]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull networking fixes from David Miller:

 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
    bunch of folks.  From Emmanuel Grumbach.

 2) Work limiting code in brcmsmac wifi driver can clear tx status
    without processing the event.  From Arend van Spriel.

 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.

 4) l2tp tunnel delete can race with close, fix from Tom Parkin.

 5) pktgen_add_device() failures are not checked at all, fix from Cong
    Wang.

 6) Fix unintentional removal of carrier off from tun_detach(),
    otherwise we confuse userspace, from Michael S.  Tsirkin.

 7) Don't leak socket reference counts and ubufs in vhost-net driver,
    from Jason Wang.

 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
    Horman.

 9) Protect against USB networking devices which spam the host with 0
    length frames, from Bjørn Mork.

10) Prevent neighbour overflows in ipv6 for locally destined routes,
    from Marcelo Ricardo.  This is the best short-term fix for this, a
    longer term fix has been implemented in net-next.

11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops.  This
    mistake is largely because the ipv6 functions don't even have some
    kind of prefix in their names to suggest they are ipv6 specific.
    From Tom Parkin.

12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
    Yuchung Cheng.

13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
    Francois Romieu and your's truly.

14) Fix infinite loops and divides by zero in TCP congestion window
    handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.

15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
    from Phil Sutter.

16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.

17) Protect XEN netback driver against hostile frontend putting garbage
    into the rings, don't leak pages in TX GOP checking, and add proper
    resource releasing in error path of xen_netbk_get_requests().  From
    Ian Campbell.

18) SCTP authentication keys should be cleared out and released with
    kzfree(), from Daniel Borkmann.

19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
    up corrupting socket memory accounting to the point where packet
    sending is halted indefinitely.  Just remove the adjustments
    entirely, they aren't really needed.  From Eric Dumazet.

20) ATM Iphase driver uses a data type with the same name as the S390
    headers, rename to fix the build.  From Heiko Carstens.

21) Fix a typo in copying the inner network header offset from one SKB
    to another, from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  tcp: fix for zero packets_in_flight was too broad
  brcmsmac: rework of mac80211 .flush() callback operation
  ssb: unregister gpios before unloading ssb
  bcma: unregister gpios before unloading bcma
  rtlwifi: Fix scheduling while atomic bug
  net: usbnet: fix tx_dropped statistics
  tcp: ipv6: Update MIB counters for drops
  ...

This pulls in a bunch of fixes that are in Linus's tree because we need them
here for testing and development.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 6509141f9c2ba74df6cc72ec35cd1865276ae3a4 ("usbnet: add new
flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was
using an already defined value, which broke drivers using flag
MULTI_PACKET.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_OMAP_CONTROL_USB isn't enabled,
there's a compile warning stating that a
particular function isn't a prototype.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a few tiny USB fixes for 3.8-rc6.

  Nothing major here, some host controller bug fixes to resolve a number
  of bugs that people have reported, and a bunch of additional device
  ids are added to a number of drivers (which caused code to be deleted
  from the usb-storage driver, always nice)"

* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  USB: storage: optimize to match the Huawei USB storage devices and support new switch command
  USB: storage: Define a new macro for USB storage match rules
  USB: ftdi_sio: add Zolix FTDI PID
  USB: option: add Changhong CH690
  USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
  USB: add OWL CM-160 support to cp210x driver
  USB: EHCI: fix bug in scheduling periodic split transfers
  USB: EHCI: fix for leaking isochronous data
  USB: option: add support for Telit LE920
  USB: qcserial: add Telit Gobi QDL device
  USB: EHCI: fix timer bug affecting port resume
  USB: UHCI: notify usbcore about port resumes
  USB: EHCI: notify usbcore about port resumes
  USB: add usb_hcd_{start,end}_port_resume
  USB: EHCI: unlink one async QH at a time
  USB: EHCI: remove ASS/PSS polling timeout
  usb: Using correct way to clear usb3.0 device's remote wakeup feature.
  usb: Prevent dead ports when xhci is not enabled
  USB: XHCI: fix memory leak of URB-private data
  drivers: xhci: fix incorrect bit test
  ...

From Stephen Warren:
ARM: tegra: USB driver cleanup

The Tegra USB driver has a number of issues:

1) The PHY driver isn't a true platform device, and doesn't implement
   the standard USB PHY API.

2) struct device instance numbers were used to make decisions in the
   driver, rather than being parameterized by DT or platform data.

This pull request solves issue (2), and lays the groundwork for solving
issue (1). The work on issue (1) involved introducing new DT nodes for
the USB PHYs, which in turn interacted with the Tegra common clock
framework changes, due to the move of clock lookups into device tree.
Hence, these USB driver changes are taken through the Tegra tree with
acks from USB maintainers.

This pull request is based on the previous pull request, with tag
tegra-for-3.9-soc-ccf.

* tag 'tegra-for-3.9-soc-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  usb: host: tegra: make use of PHY pointer of HCD
  ARM: tegra: Add reset GPIO information to PHY DT node
  usb: host: tegra: don't touch EMC clock
  usb: add APIs to access host registers from Tegra PHY
  USB: PHY: tegra: Get rid of instance number to differentiate PHY type
  USB: PHY: tegra: get rid of instance number to differentiate legacy controller
  ARM: tegra: add clocks properties to USB PHY nodes
  ARM: tegra: add DT nodes for Tegra USB PHY
  usb: phy: remove unused APIs from Tegra PHY.
  usb: host: tegra: Resetting PORT0 based on information received via DT.
  ARM: tegra: Add new DT property to USB node.
  usb: phy: use kzalloc to allocate struct tegra_usb_phy
  ARM: tegra: remove USB address related macros from iomap.h