linux.git/include/linux/soundwire/sdw.h, branch v6.4

Merge tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

2023-02-25T01:29:52+00:00

Pull soundwire updates from Vinod Koul:
 "This is a small update which features a bit of core changes and driver
  updates in Intel and cadence driver.

  Core:

   - sdw_transfer_defer() API change to drop an argument

   - Reset page address rework

   - Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs

  Drivers:

   - Cadence and related intel driver updates for FIFO handling and low
     level msg transfers"

* tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: cadence: further simplify low-level xfer_msg_defer() callback
  soundwire: cadence: use directly bus sdw_defer structure
  soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()
  soundwire: stream: use consistent pattern for freeing buffers
  soundwire: bus: Remove unused reset_page_addr() callback
  soundwire: bus: Don't zero page registers after every transaction
  soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
  soundwire: stream: Move remaining register accesses over to no_pm
  soundwire: debugfs: Switch to sdw_read_no_pm
  soundwire: Provide build stubs for common functions
  soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
  soundwire: cadence: remove unused sdw_cdns_master_ops declaration
  soundwire: enable optional clock registers for SoundWire 1.2 devices
  ASoC/soundwire: remove is_sdca boolean property
  soundwire: cadence: Drain the RX FIFO after an IO timeout
  soundwire: cadence: Remove wasted space in response_buf
  soundwire: cadence: Don't overflow the command FIFOs
  soundwire: intel: remove DAI startup/shutdown

soundwire: cadence: further simplify low-level xfer_msg_defer() callback

2023-01-31T14:31:52+00:00

The message pointer is already stored in the bus->defer structure, not
need to pass it as an argument.

Suggested-by: Ranjani Sridharan 
Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Ranjani Sridharan 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20230119073211.85979-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: cadence: use directly bus sdw_defer structure

2023-01-31T14:29:21+00:00

Copying the bus sdw_defer structure into the Cadence internals leads
to using stale pointers and kernel oopses on errors. It's just simpler
and safer to use the bus sdw_defer structure directly.

Link: https://github.com/thesofproject/linux/issues/4056
Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Ranjani Sridharan 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20230119073211.85979-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: stream: Add specific prep/deprep commands to port_prep callback

2023-01-31T12:10:45+00:00

Currently, port_prep callback only has commands for PRE_PREP, PREP,
and POST_PREP, which doesn't directly say whether this is for a
prepare or deprepare call. Extend the command list enum to say
whether the call is for prepare or deprepare aswell.

Also remove SDW_OPS_PORT_PREP from sdw_port_prep_ops as this is unused,
and update this enum to be simpler and more consistent with enum
sdw_clk_stop_type.

Note: Currently, the only users of SDW_OPS_PORT_POST_PREP are codec
drivers sound/soc/codecs/wsa881x.c and sound/soc/codecs/wsa883x.c, both
of which seem to assume that POST_PREP only occurs after a prepare,
even though it would also have occurred after a deprepare. Since it
doesn't make sense to mark the port prepared after a deprepare, changing
the enum to separate PORT_DEPREP from PORT_PREP should make the check
for PORT_PREP in those drivers be more logical.

Signed-off-by: Stefan Binding 
Reviewed-by: Pierre-Louis Bossart 
Acked-By: Vinod Koul 
Link: https://lore.kernel.org/r/20230127165111.3010960-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown

soundwire: bus: Remove unused reset_page_addr() callback

2023-01-31T12:06:14+00:00

A previous patch removed unnecessary zeroing of the page registers
after a paged transaction, so now the reset_page_addr callback is
unused and can be removed.

Signed-off-by: Richard Fitzgerald 
Reviewed-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20230123164949.245898-3-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul

soundwire: Provide build stubs for common functions

2023-01-09T16:16:27+00:00

Provide stub functions when CONFIG_SOUNDWIRE is not set for functions
that are quite likely to be used from common code on devices supporting
multiple control buses.

Reviewed-by: Pierre-Louis Bossart 
Signed-off-by: Charles Keepax 
Link: https://lore.kernel.org/r/20221125142028.1118618-3-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul

soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions

2023-01-09T16:16:27+00:00

The commit 167790abb90f ("soundwire: export sdw_write/read_no_pm
functions") exposed the single byte no_pm versions of the IO functions
that can be used without touching PM, export the multi byte no_pm
versions for the same reason.

Reviewed-by: Pierre-Louis Bossart 
Signed-off-by: Simon Trimmer 
Signed-off-by: Charles Keepax 
Link: https://lore.kernel.org/r/20221125142028.1118618-2-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul

soundwire: enable optional clock registers for SoundWire 1.2 devices

2023-01-09T16:07:40+00:00

The bus supports the mandatory clock registers for SDCA devices, these
registers can also be optionally supported by SoundWire 1.2 devices
that don't follow the SDCA class specification.

Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Rander Wang 
Reviewed-by: Péter Ujfalusi 
Signed-off-by: Bard Liao 
Reviewed-by: Charles Keepax 
Link: https://lore.kernel.org/r/20221118025807.534863-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

ASoC/soundwire: remove is_sdca boolean property

2023-01-09T16:07:40+00:00

The Device_ID registers already tell us if a device supports the SDCA
specification or not, in hindsight we never needed a property when the
information is reported by both hardware and ACPI.

Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Rander Wang 
Reviewed-by: Péter Ujfalusi 
Signed-off-by: Bard Liao 
Reviewed-by: Charles Keepax 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20221118025807.534863-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

Merge tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

2022-10-07T23:13:55+00:00

Pull soundwire updates from Vinod Koul:
 "Updates for Intel, Cadence and Qualcomm drivers:

   - another round of Intel driver cleanup to prepare for future code
     reorg which is expected in next cycle (Pierre-Louis Bossart)

   - bus unattach notifications processing during re-enumeration along
     with Cadence driver updates for this (Richard Fitzgerald)

   - Qualcomm driver updates to handle device0 status (Srinivas
     Kandagatla)"

* tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (42 commits)
  soundwire: intel: add helper to stop bus
  soundwire: intel: introduce helpers to start bus
  soundwire: intel: introduce intel_shim_check_wake() helper
  soundwire: intel: simplify read ops assignment
  soundwire: intel: remove intel_init() wrapper
  soundwire: intel: move shim initialization before power up/down
  soundwire: intel: remove clock_stop parameter in intel_shim_init()
  soundwire: intel: move all PDI initialization under intel_register_dai()
  soundwire: intel: move DAI registration and debugfs init earlier
  soundwire: intel: simplify flow and use devm_ for DAI registration
  soundwire: intel: fix error handling on dai registration issues
  soundwire: cadence: Simplify error paths in cdns_xfer_msg()
  soundwire: cadence: Fix error check in cdns_xfer_msg()
  soundwire: cadence: Write to correct address for each FIFO chunk
  soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
  soundwire: qcom: do not send status of device 0 during alert
  soundwire: qcom: update status from device id 1
  soundwire: cadence: Don't overwrite msg->buf during write commands
  soundwire: bus: Don't exit early if no device IDs were programmed
  soundwire: cadence: Fix lost ATTACHED interrupts when enumerating
  ...