linux.git/include/linux/regulator, branch v4.5 Linux kernel source tree Merge remote-tracking branches 'regulator/topic/pv88090', 'regulator/topic/qcom-smd', 'regulator/topic/tps6105x', 'regulator/topic/tps65086' and 'regulator/topic/tps65218' into regulator-next 2016-01-12T18:26:10+00:00 Mark Brown broonie@kernel.org 2016-01-12T18:26:10+00:00 78ae90255276d2cb9e4410df74b378cb9f8a8bbb 






regulator: tps65218: add support for LS3 current regulator
2015-11-25T12:25:26+00:00

Nikita Kiryanov
nikita@compulab.co.il

2015-11-25T11:59:04+00:00

c0ea88b890d67cff2667188f14189d8346e89a0f

Add support for TPS65218 LS3 current regulator, which is capable of 4
current input limit modes: 100, 200, 500, and 1000 uA.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Mark Brown <broonie@kernel.org>





Add support for TPS65218 LS3 current regulator, which is capable of 4
current input limit modes: 100, 200, 500, and 1000 uA.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: Make bulk API support optional supplies
2015-11-17T18:54:07+00:00

Bjorn Andersson
bjorn.andersson@sonymobile.com

2015-11-10T06:20:37+00:00

3ff3f518a135fa4592fe2817e9ac2cce1fa23dc2

Make it possible to use the bulk API with optional supplies, by allowing
the consumer to marking supplies as optional in the regulator_bulk_data.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>





Make it possible to use the bulk API with optional supplies, by allowing
the consumer to marking supplies as optional in the regulator_bulk_data.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: introduce min_dropout_uV
2015-10-16T16:57:33+00:00

Sascha Hauer
s.hauer@pengutronix.de

2015-10-13T10:45:26+00:00

5abe4f223ed6b820443d3657bd48600692f61c12

Many voltage Regulators need a input voltage that is higher than the
output voltage. Allow to specify a minimum dropout voltage which will
be used later to find the best input voltage for regulators.

[Changed uv to uV for consistency and legibility -- broonie]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>





Many voltage Regulators need a input voltage that is higher than the
output voltage. Allow to specify a minimum dropout voltage which will
be used later to find the best input voltage for regulators.

[Changed uv to uV for consistency and legibility -- broonie]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>







Merge remote-tracking branches 'regulator/topic/qcom-smd', 'regulator/topic/qcom-spmi', 'regulator/topic/rk808', 'regulator/topic/stub' and 'regulator/topic/tol' into regulator-next
2015-08-30T13:40:11+00:00

Mark Brown
broonie@kernel.org

2015-08-30T13:40:11+00:00

aaa9b649d0868725cd7536bc9017fe3956ad5393












Merge remote-tracking branches 'regulator/topic/mt6311', 'regulator/topic/ocp', 'regulator/topic/owner', 'regulator/topic/pfuze100' and 'regulator/topic/pwm' into regulator-next
2015-08-30T13:39:48+00:00

Mark Brown
broonie@kernel.org

2015-08-30T13:39:48+00:00

3e683126f4b42bd29ac5adff1eb178880aa7706a












regulator: core: Define regulator_set_voltage_triplet()
2015-08-17T19:54:01+00:00

Viresh Kumar
viresh.kumar@linaro.org

2015-08-17T02:46:51+00:00

30f93ca8323f0c21b789bea0f7db8e8e3a7915c6

Voltage tolerance isn't necessarily same on both sides of the target
voltage and regulator_set_voltage_tol() wouldn't be suitable in such
cases.

Add another routine regulator_set_voltage_triplet(), which accepts
target, min and max voltages as arguments.

This first tries to set the voltage between the target voltage and the
upper limit, then fall back on the full range. The idea behind this is
to set regulator's voltage as close to the target voltage, as possible.

Based on regulator_set_voltage_tol().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>





Voltage tolerance isn't necessarily same on both sides of the target
voltage and regulator_set_voltage_tol() wouldn't be suitable in such
cases.

Add another routine regulator_set_voltage_triplet(), which accepts
target, min and max voltages as arguments.

This first tries to set the voltage between the target voltage and the
upper limit, then fall back on the full range. The idea behind this is
to set regulator's voltage as close to the target voltage, as possible.

Based on regulator_set_voltage_tol().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: Add over current protection (OCP) support
2015-07-24T17:28:46+00:00

Stephen Boyd
sboyd@codeaurora.org

2015-07-17T21:41:54+00:00

3a003baeec246f604ed1d2e0087560d7f15edcc6

Some regulators can automatically shut down when they detect an
over current event. Add an op (set_over_current_protection) and a
DT property + constraint to support this capability.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>





Some regulators can automatically shut down when they detect an
over current event. Add an op (set_over_current_protection) and a
DT property + constraint to support this capability.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: mt6311: Add support for mt6311 regulator
2015-07-24T11:30:49+00:00

Henry Chen
henryc.chen@mediatek.com

2015-07-24T05:24:41+00:00

8766018b6ef73ca124d13b0d0a06dec906726cc8

Add regulator support for mt6311.
It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage
data to the driver, and creates the regulator_desc table. Supported
operations for Buck are enabled/disabled and voltage change, only
enabled/disabled for LDO.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>





Add regulator support for mt6311.
It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage
data to the driver, and creates the regulator_desc table. Supported
operations for Buck are enabled/disabled and voltage change, only
enabled/disabled for LDO.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: da9211: support da9215
2015-07-13T18:11:24+00:00

James Ban
james.ban.opensource@diasemi.com

2015-06-30T04:39:39+00:00

7bd393543287b921f964a350166bf2866527a1b5

This is a patch for supporting da9215 buck converter.

Signed-off-by: James Ban <james.ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>





This is a patch for supporting da9215 buck converter.

Signed-off-by: James Ban <james.ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>