Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/667a515b8d0f10f2465d519f8595edd91552fc5e.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull HID updates from Jiri Kosina:

 - open/close tracking improvements from Dmitry Torokhov

 - battery support improvements in Wacom driver from Jason Gerecke

 - Win8 support fixes from Benjamin Tissories and Hans de Geode

 - misc fixes to Intel-ISH driver from Arnd Bergmann

 - support for quite a few new devices and small assorted fixes here and
   there

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits)
  HID: intel-ish-hid: Enable Gemini Lake ish driver
  HID: intel-ish-hid: Enable Cannon Lake ish driver
  HID: wacom: fix mistake in printk
  HID: multitouch: optimize the sticky fingers timer
  HID: multitouch: fix rare Win 8 cases when the touch up event gets missing
  HID: multitouch: use BIT macro
  HID: Add driver for Retrode2 joypad adapter
  HID: multitouch: Add support for Google Rose Touchpad
  HID: multitouch: Support PTP Stick and Touchpad device
  HID: core: don't use negative operands when shift
  HID: apple: Use country code to detect ISO keyboards
  HID: remove no longer used hid->open field
  greybus: hid: remove custom locking from gb_hid_open/close
  HID: usbhid: remove custom locking from usbhid_open/close
  HID: i2c-hid: remove custom locking from i2c_hid_open/close
  HID: serialize hid_hw_open and hid_hw_close
  HID: usbhid: do not rely on hid->open when deciding to do IO
  HID: hiddev: use hid_hw_power instead of usbhid_get/put_power
  HID: hiddev: use hid_hw_open/close instead of usbhid_open/close
  HID: asus: Add support for Zen AiO MD-5110 keyboard
  ...

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for STM FingerTip touchscreen

 - a new driver for D-Link DIR-685 touch keys

 - updated list of supported devices in xpad driver

 - other assorted updates and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits)
  MAINTAINERS: update input subsystem patterns
  Input: introduce KEY_ASSISTANT
  Input: xpad - sync supported devices with XBCD
  Input: xpad - sync supported devices with 360Controller
  Input: xen-kbdfront - use string constants from PV protocol
  Input: stmfts - mark all PM functions as __maybe_unused
  Input: add support for the STMicroelectronics FingerTip touchscreen
  Input: add D-Link DIR-685 touchkeys driver
  Input: s3c2410_ts - handle return value of clk_prepare_enable
  Input: axp20x-pek - add wakeup support
  Input: synaptics-rmi4 - use %phN to form F34 configuration ID
  Input: synaptics-rmi4 - change a char type to u8
  Input: sparse-keymap - remove sparse_keymap_free()
  Input: tsc2007 - move header file out of I2C realm
  Input: mms114 - move header file out of I2C realm
  Input: mcs - move header file out of I2C realm
  Input: lm8323 - move header file out of I2C realm
  Input: elantech - force relative mode on a certain module
  Input: elan_i2c - add support for fetching chip type on newer hardware
  Input: elan_i2c - check if device is there before really probing
  ...

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Report correct error status to user

  Fix-ups:
   - Move Backlight headers out of I2C (adp8860, adp8870)"

* tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  video: adp8870: move header file out of I2C realm
  backlight: adp8860: Move header file out of I2C realm
  backlight: Report error on failure

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...

Pull clk updates from Stephen Boyd:
 "This time we've got one core change to introduce a bulk clk_get API,
  some new clk drivers and updates for old ones. The diff is pretty
  spread out across a handful of different SoC clk drivers for Broadcom,
  TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to
  the introduction of new drivers.

  Core:
   - New clk bulk get APIs
   - Clk divider APIs gained the ability to consider a different parent
     than the current one

  New Drivers:
   - Renesas r8a779{0,1,2,4} CPG/MSSR
   - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
   - Qualcomm IPQ8074 SoCs
   - Cortina Systems Gemini (SL3516/CS3516)
   - Rockchip rk3128 SoCs
   - Allwinner A83T clk control units
   - Broadcom Stingray SoCs
   - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs

  Removed Drivers:
   - Old non-DT version of the Realview clk driver

  Updates:
   - Renesas Kconfig/Makefile cleanups
   - Amlogic CEC EE clk support
   - Improved Armada 7K/8K cp110 clk support
   - Rockchip clk id exposing, critical clk markings
   - Samsung converted to clk_hw registration APIs
   - Fixes for Samsung exynos5420 audio clks
   - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for
     hi3660"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits)
  clk: gemini: Read status before using the value
  clk: scpi: error when clock fails to register
  clk: at91: Add sama5d2 suspend/resume
  gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
  clk: keystone: TI_SCI_PROTOCOL is needed for clk driver
  clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL
  clk: uniphier: provide NAND controller clock rate
  clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
  clk: Add Gemini SoC clock controller
  clk: iproc: Remove __init marking on iproc_pll_clk_setup()
  clk: bcm: Add clocks for Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
  clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
  clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
  clk: renesas: cpg-mssr: Use of_device_get_match_data() helper
  clk: hi6220: add acpu clock
  clk: zx296718: export I2S mux clocks
  clk: imx7d: create clocks behind rawnand clock gate
  clk: hi3660: Set PPLL2 to 2880M
  ...

Pull LED updates from Jacek Anaszewski:
 "This time we're removing more than adding:

  Removed drivers:

    leds-versatile:
      - all users of the Versatile LED driver are deleted and replaced
        with the very generic leds-syscon

    leds-sead3:
      - SEAD3 is using the generic leds-syscon & regmap based
        register-bit-led driver

  LED class drivers improvements:

    ledtrig-gpio:
      - use threaded IRQ, which both simplifies the code because we can
        drop the workqueue indirection, and it enables using the trigger
        for GPIOs that work with threaded IRQs themselves
      - refresh LED state after GPIO change since the new GPIO may have
        a different state than the old one

    leds-lp55xx:
      - make various arrays static const

    leds-pca963x:
      - add bindings to invert polarity"

* tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: make various arrays static const
  leds: Remove SEAD-3 driver
  leds: trigger: gpio: Use threaded IRQ
  leds: trigger: gpio: Refresh LED state after GPIO change
  leds: Delete obsolete Versatile driver
  leds: pca963x: Add bindings to invert polarity

include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>