Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

* pci/bjorn-find-next-ext-cap:
  PCI: Add Vendor-Specific Extended Capability header info
  PCI: Add pci_find_next_ext_capability()

Conflicts:
	drivers/pci/pci.c

The PCI Express Capability (PCIe spec r3.0, sec 7.8) comes in two
versions, v1 and v2.  In v1 Capability structures (PCIe spec r1.0 and
r1.1), some fields are optional, so the structure size depends on the
device type.

This patch adds functions to access this capability so drivers don't
have to be aware of the differences between v1 and v2.  Note that these
new functions apply only to the "PCI Express Capability," not to any of
the other "PCI Express Extended Capabilities" (AER, VC, ACS, MFVC, etc.)

Function pcie_capability_read_word/dword() reads the PCIe Capabilities
register and returns the value in the reference parameter "val".  If
the PCIe Capabilities register is not implemented on the PCIe device,
"val" is set to 0.

Function pcie_capability_write_word/dword() writes the value to the
specified PCIe Capability register.

Function pcie_capability_clear_and_set_word/dword() sets and/or clears bits
of a PCIe Capability register.

[bhelgaas: changelog, drop "pci_" prefixes, don't export
pcie_capability_reg_implemented()]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This adds the fields in the Vendor-Specific Header: ID, Rev, and Length.
There may be multiple Vendor-Specific capabilities, so drivers should use
the VSEC ID to identify the one of interest.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull drm updates from Dave Airlie:
 "One of the smaller drm -next pulls in ages!

  Ben (nouveau) has a rewrite in progress but we decided to leave it
  stew for another cycle, so just some fixes from him.

   - radeon: lots of documentation work, fixes, more ring and locking
     changes, pcie gen2, more dp fixes.
   - i915: haswell features, gpu reset fixes, /dev/agpgart removal on
     machines that we never used it on, more VGA/HDP fix., more DP fixes
   - drm core: cleanups from Daniel, sis 64-bit fixes, range allocator
     colouring.

  but yeah fairly quiet merge this time, probably because I missed half
  of it!"

Trivial add-add conflict in include/linux/pci_regs.h

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (255 commits)
  drm/nouveau: init vblank requests list
  drm/nv50: extend vblank semaphore to generic dmaobj + offset pair
  drm/nouveau: mark most of our ioctls as deprecated, move to compat layer
  drm/nouveau: move current gpuobj code out of nouveau_object.c
  drm/nouveau/gem: fix object reference leak in a failure path
  drm/nv50: rename INVALID_QUERY_OR_TEXTURE error to INVALID_OPERATION
  drm/nv84: decode PCRYPT errors
  drm/nouveau: dcb table quirk for fdo#50830
  nouveau: Fix alignment requirements on src and dst addresses
  drm/i915: unbreak lastclose for failed driver init
  drm/i915: Set the context before setting up regs for the context.
  drm/i915: constify mode in crtc_mode_fixup
  drm/i915/lvds: ditch ->prepare special case
  drm/i915: dereferencing an error pointer
  drm/i915: fix invalid reference handling of the default ctx obj
  drm/i915: Add -EIO to the list of known errors for __wait_seqno
  drm/i915: Flush the context object from the CPU caches upon switching
  drm/radeon: fix dpms on/off on trinity/aruba v2
  drm/radeon: on hotplug force link training to happen (v2)
  drm/radeon: fix hotplug of DP to DVI|HDMI passive adapters (v2)
  ...

We need these for detecting the max link speed for drm drivers.

Acked-by: Bjorn Helgaas <bhelgass@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* pci/bjorn-p2p-bridge-windows:
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: allow P2P bridge windows starting at PCI bus address zero

Conflicts:
	drivers/pci/probe.c
	include/linux/pci.h

9d265124d051 and 15a260d53f7c added quirks for P2P bridges that support
I/O windows that start/end at 1K boundaries, not just the 4K boundaries
defined by the PCI spec.  For details, see the IOBL_ADR register and the
EN1K bit in the CNF register in the Intel 82870P2 (P64H2).

These quirks complicate the code that reads P2P bridge windows
(pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge
I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(),
in pci_setup_bridge(), and again in the FINAL quirk.  This is confusing
and makes it impossible to reassign the bridge windows after FINAL
quirks are run.

This patch adds support for 1K windows in the generic paths, so the
HEADER quirk only has to enable this support.  The FINAL quirk, which
used to undo damage done by pci_setup_bridge(), is no longer needed.

This removes "if (!res->start) res->start = ..." from pci_read_bridge_io();
that was part of 9d265124d051 to avoid overwriting the resource filled in
by the quirk.  Since pci_read_bridge_io() itself now knows about
granularity, the quirk no longer updates the resource and this test is no
longer needed.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

* topic/stowe-cap-cleanup:
  PCI: remove redundant capabilities checking in pci_{save, restore}_pcie_state
  PCI: add pci_pcie_cap2() check for PCIe feature capabilities >= v2
  PCI: remove redundant checking in PCI Express capability routines
  PCI: make pci_ltr_supported() static

Fill in many missing definitions and add sizeof fields for many
sections allowing for more extensive config parsing.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>