linux.git/include/linux/pci_ids.h, branch v6.10-rc2 Linux kernel source tree Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2024-05-21T17:09:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-21T17:09:28+00:00 f0bae243b2bcf2b160ae547463bf542762beef8f Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ... 
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...
Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 2024-05-15T17:02:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-15T17:02:36+00:00 33e02dc69afbd8f1b85a51d74d72f139ba4ca623 Pull sound updates from Takashi Iwai: "This one became bigger than usual, not in the total size but rather containing lots of small changes all over the places. The majority of changes are about ASoC, especially SOF / Intel stuff, and we see an interesting work for ASoC DAPM graph visualization, while there are many other code cleanup and refactoring, too. Core: - A deadlock fix at device disconnection - A new tool dapm-graph for visualising the DAPM state ASoC: - Large updates throughout the Intel audio drivers - Fixes and clarifications for the DAPM documentation - Cleanups of accessors for driver data, module labelling, and for constification - Modernsation and cleanup work in the Mediatek drivers - Several fixes and features for the DaVinci I2S driver - New drivers for several AMD and Intel platforms, Nuvoton NAU8325, Rockchip RK3308 and Texas Instruments PCM6240 HD-audio: - Cleanup for CONFIG_PM dependencies - Cirrus HD-audio codec fixes and quirks Others: - Series of tree-wide fixes in Makefiles to use *-y - Additions of missing module descriptions - Scarlett2 USB mixer enhancements - A series of legacy emu10k1 fixes and improvements" * tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits) ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e ALSA: hda/realtek - fixed headset Mic not show ASoC: SOF: amd: Fix build error with built-in config ALSA: scarlett2: Increase mixer range to +12dB ALSA: scarlett2: Add S/PDIF source selection controls ALSA: core: Remove superfluous CONFIG_PM ALSA: Fix deadlocks with kctl removals at disconnection ASoC: audio-graph-card2: call of_node_get() before of_get_next_child() ASoC: SOF: amd: Correct spaces in Makefile ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume() ASoC: Intel: sof_sdw_rt_amp: use dai parameter ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info ASoC: Intel: sof_sdw: use generic name for controls/widgets ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker ASoC: Intel: maxim-common: change max98373 data to static ASoC: Intel: sof_sdw: add max98373 dapm routes ASoC: Intel: sof_rt5682: use max_98373_dai_link function ASoC: Intel: sof_nau8825: use max_98373_dai_link function ... 
Pull sound updates from Takashi Iwai:
 "This one became bigger than usual, not in the total size but rather
  containing lots of small changes all over the places.

  The majority of changes are about ASoC, especially SOF / Intel stuff,
  and we see an interesting work for ASoC DAPM graph visualization,
  while there are many other code cleanup and refactoring, too.

  Core:
   - A deadlock fix at device disconnection
   - A new tool dapm-graph for visualising the DAPM state

  ASoC:
   - Large updates throughout the Intel audio drivers
   - Fixes and clarifications for the DAPM documentation
   - Cleanups of accessors for driver data, module labelling, and for
     constification
   - Modernsation and cleanup work in the Mediatek drivers
   - Several fixes and features for the DaVinci I2S driver
   - New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
     Rockchip RK3308 and Texas Instruments PCM6240

  HD-audio:
   - Cleanup for CONFIG_PM dependencies
   - Cirrus HD-audio codec fixes and quirks

  Others:
   - Series of tree-wide fixes in Makefiles to use *-y
   - Additions of missing module descriptions
   - Scarlett2 USB mixer enhancements
   - A series of legacy emu10k1 fixes and improvements"

* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
  ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
  ALSA: hda/realtek - fixed headset Mic not show
  ASoC: SOF: amd: Fix build error with built-in config
  ALSA: scarlett2: Increase mixer range to +12dB
  ALSA: scarlett2: Add S/PDIF source selection controls
  ALSA: core: Remove superfluous CONFIG_PM
  ALSA: Fix deadlocks with kctl removals at disconnection
  ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
  ASoC: SOF: amd: Correct spaces in Makefile
  ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
  ASoC: Intel: sof_sdw_rt_amp: use dai parameter
  ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
  ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
  ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
  ASoC: Intel: sof_sdw: use generic name for controls/widgets
  ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
  ASoC: Intel: maxim-common: change max98373 data to static
  ASoC: Intel: sof_sdw: add max98373 dapm routes
  ASoC: Intel: sof_rt5682: use max_98373_dai_link function
  ASoC: Intel: sof_nau8825: use max_98373_dai_link function
  ...
VFIO: Add the SPR_DSA and SPR_IAX devices to the denylist 2024-05-13T14:07:33+00:00 Arjan van de Ven arjan@linux.intel.com 2024-03-21T19:44:07+00:00 95feb3160eef0caa6018e175a5560b816aee8e79 Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign these devices to virtual machines. Add the PCI IDs of these devices to the VFIO denylist to ensure that this is handled appropriately by the VFIO subsystem. The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids (and related) family of products that perform data movement and compression. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> 
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.

The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
x86/amd_nb: Add new PCI IDs for AMD family 0x1a 2024-05-10T12:52:46+00:00 Shyam Sundar S K Shyam-sundar.S-k@amd.com 2024-05-10T11:18:28+00:00 0e640f0a47d8426eab1fb9c03f0af898dfe810b8 Add the new PCI Device IDs to the MISC IDs list to support new generation of AMD 1Ah family 70h Models of processors. [ bp: Massage commit message. ] Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240510111829.969501-1-Shyam-sundar.S-k@amd.com 
Add the new PCI Device IDs to the MISC IDs list to support new
generation of AMD 1Ah family 70h Models of processors.

  [ bp: Massage commit message. ]

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240510111829.969501-1-Shyam-sundar.S-k@amd.com
PCI/CXL: Move CXL Vendor ID to pci_ids.h 2024-05-08T18:18:33+00:00 Dave Jiang dave.jiang@intel.com 2024-05-02T16:57:30+00:00 962f1e79e7acfb30207a378894b1bbf6742e6212 Move PCI_DVSEC_VENDOR_ID_CXL in CXL private code to PCI_VENDOR_ID_CXL in pci_ids.h in order to be utilized in PCI subsystem. While the CXL Vendor ID (0x1e98) is not listed in the PCI SIG "Member Companies" database at https://pcisig.com/membership/member-companies, the SIG has confirmed that it is reserved by CXL. Link: https://lore.kernel.org/r/20240502165851.1948523-2-dave.jiang@intel.com Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/linux-cxl/20240402172323.GA1818777@bhelgaas/ Signed-off-by: Dave Jiang <dave.jiang@intel.com> [bhelgaas: update commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> 
Move PCI_DVSEC_VENDOR_ID_CXL in CXL private code to PCI_VENDOR_ID_CXL in
pci_ids.h in order to be utilized in PCI subsystem.

While the CXL Vendor ID (0x1e98) is not listed in the PCI SIG "Member
Companies" database at https://pcisig.com/membership/member-companies, the
SIG has confirmed that it is reserved by CXL.

Link: https://lore.kernel.org/r/20240502165851.1948523-2-dave.jiang@intel.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/linux-cxl/20240402172323.GA1818777@bhelgaas/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
ALSA: hda: Add Intel BMG PCI ID and HDMI codec vid 2024-05-08T16:15:19+00:00 Chaitanya Kumar Borah chaitanya.kumar.borah@intel.com 2024-05-06T05:25:31+00:00 e8336a63de03eab16927abe1fc686c3ea10b27c6 Add HD Audio PCI ID and HDMI codec vendor ID for Intel Battlemage. Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/20240506052531.1150062-1-chaitanya.kumar.borah@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Add HD Audio PCI ID and HDMI codec vendor ID for Intel Battlemage.

Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/20240506052531.1150062-1-chaitanya.kumar.borah@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 2024-01-12T19:55:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-12T19:55:28+00:00 7912a6391f3ee7eb9f9a69227a209d502679bc0c Pull sound updates from Takashi Iwai: "It was a calm development cycle. There were an ALSA core extension for subformat PCM bits and a few ASoC core changes to support N:M mappings, while the most of remaining changes are driver-specific. Core: - API extensions for properly limiting PCM format bits via subformat - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2 ASoC: - Lots of SOF updates: fallback support to older IPC versions, notification on control changes with IPC4. Also supports for ACPI parse for the ES83xx driver that reduces quirks. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases) - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100 - Drop of Freescale MPC8610 code that is no longer supported HD-audio: - More CS35L41 codec extensions for Dell, HP and Lenovo models - TAS2781 codec extensions for Lenovo and co - New PCM subformat supports Others: - More enhancement for Scarlett2 USB mixer support - Various kselftest fixes" * tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits) kselftest/alsa - conf: Stringify the printed errno in sysfs_get() kselftest/alsa - mixer-test: Fix the print format specifier warning kselftest/alsa - mixer-test: Fix the print format specifier warning kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg() ALSA: hda/tas2781: annotate calibration data endianness ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140 ALSA: ac97: fix build regression ALSA: hda: cs35l41: Support more HP models without _DSD ALSA: hda/tas2781: add fixup for Lenovo 14ARB7 ALSA: hda/tas2781: add TAS2563 support for 14ARB7 ALSA: hda/tas2781: add configurable global i2c address ALSA: hda/tas2781: add ptrs to calibration functions ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie ALSA: hda/tas2781: configure the amp after firmware load ALSA: mark all struct bus_type as const ASoC: pxa: sspa: Don't select SND_ARM ASoC: rt5663: cancel the work when system suspends ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4 ... 
Pull sound updates from Takashi Iwai:
 "It was a calm development cycle. There were an ALSA core extension for
  subformat PCM bits and a few ASoC core changes to support N:M
  mappings, while the most of remaining changes are driver-specific.

  Core:
   - API extensions for properly limiting PCM format bits via subformat
   - Enhanced support for N:M CPU:CODEC mappings in the core and in
     audio-graph-card2

  ASoC:
   - Lots of SOF updates: fallback support to older IPC versions,
     notification on control changes with IPC4. Also supports for ACPI
     parse for the ES83xx driver that reduces quirks.
   - Device tree support for describing parts of the card which can be
     active over suspend (for very low power playback or wake word use
     cases)
   - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
     SM8250, SM8550, SM8650 and X1E80100
   - Drop of Freescale MPC8610 code that is no longer supported

  HD-audio:
   - More CS35L41 codec extensions for Dell, HP and Lenovo models
   - TAS2781 codec extensions for Lenovo and co
   - New PCM subformat supports

  Others:
   - More enhancement for Scarlett2 USB mixer support
   - Various kselftest fixes"

* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
  kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
  ALSA: hda/tas2781: annotate calibration data endianness
  ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
  ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
  ALSA: ac97: fix build regression
  ALSA: hda: cs35l41: Support more HP models without _DSD
  ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
  ALSA: hda/tas2781: add TAS2563 support for 14ARB7
  ALSA: hda/tas2781: add configurable global i2c address
  ALSA: hda/tas2781: add ptrs to calibration functions
  ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
  ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
  ALSA: hda/tas2781: configure the amp after firmware load
  ALSA: mark all struct bus_type as const
  ASoC: pxa: sspa: Don't select SND_ARM
  ASoC: rt5663: cancel the work when system suspends
  ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
  ...
PCI: Add Alibaba Vendor ID to linux/pci_ids.h 2023-12-13T13:35:41+00:00 Shuai Xue xueshuai@linux.alibaba.com 2023-12-08T02:56:49+00:00 ad6534c626fedd818718d76c36d69c7d8e7b61cc The Alibaba Vendor ID (0x1ded) is now used by Alibaba elasticRDMA ("erdma") and will be shared with the upcoming PCIe PMU ("dwc_pcie_pmu"). Move the Vendor ID to linux/pci_ids.h so that it can shared by several drivers later. Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/20231208025652.87192-3-xueshuai@linux.alibaba.com Signed-off-by: Will Deacon <will@kernel.org> 
The Alibaba Vendor ID (0x1ded) is now used by Alibaba elasticRDMA ("erdma")
and will be shared with the upcoming PCIe PMU ("dwc_pcie_pmu"). Move the
Vendor ID to linux/pci_ids.h so that it can shared by several drivers
later.

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>	# pci_ids.h
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-3-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
PCI: add INTEL_HDA_ARL to pci_ids.h 2023-12-07T08:28:39+00:00 Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com 2023-12-04T21:27:06+00:00 5ec42bf04d72fd6d0a6855810cc779e0ee31dfd7 The PCI ID insertion follows the increasing order in the table, but this hardware follows MTL (MeteorLake). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231204212710.185976-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 
The PCI ID insertion follows the increasing order in the table, but
this hardware follows MTL (MeteorLake).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2023-11-03T00:05:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-11-03T00:05:18+00:00 27beb3ca347fa29fef5c23b351120239b8cf0612 Pull pci updates from Bjorn Helgaas: "Enumeration: - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM evaluation to learn device characteristics (Andy Shevchenko) - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK definition (Ilpo Järvinen) - Simplify config access error checking in various drivers (Ilpo Järvinen) - Use pcie_capability_clear_word() (not pcie_capability_clear_and_set_word()) when only clearing (Ilpo Järvinen) - Add pci_get_base_class() to simplify finding devices using base class only (ignoring subclass and programming interface) (Sui Jingfeng) - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA devices from before the Class Code was added to PCI (Sui Jingfeng) - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to include ancient VGA devices (Sui Jingfeng) Resource management: - Make pci_assign_unassigned_resources() non-init because sparc uses it after init (Randy Dunlap) Driver binding: - Retain .remove() and .probe() callbacks (previously __init) because sysfs may cause them to be called later (Uwe Kleine-König) - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so it can be claimed by dwc3 instead (Vicki Pfau) PCI device hotplug: - Add Ampere Altra Attention Indicator extension driver for acpiphp (D Scott Phillips) Power management: - Quirk VideoPropulsion Torrent QN16e with longer delay after reset (Lukas Wunner) - Prevent users from overriding drivers that say we shouldn't use D3cold (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 because wakeup interrupts from those states don't work if amd-pmc has put the platform in a hardware sleep state (Mario Limonciello) IOMMU: - Disable ATS for Intel IPU E2000 devices with invalidation message endianness erratum (Bartosz Pawlowski) Error handling: - Factor out interrupt enable/disable into helpers (Kai-Heng Feng) Peer-to-peer DMA: - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we ever use pagemaps with multiple entries (Gustavo A. R. Silva) ASPM: - Revert a change that broke when drivers disabled L1 and users later enabled an L1.x substate via sysfs, and fix a similar issue when users disabled L1 via sysfs (Heiner Kallweit) Endpoint framework: - Fix double free in __pci_epc_create() (Dan Carpenter) - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie) Cadence PCIe controller driver: - Drop unused "is_rc" member (Li Chen) Freescale Layerscape PCIe controller driver: - Enable 64-bit addressing in endpoint mode (Guanhua Gao) Intel VMD host bridge driver: - Fix multi-function header check (Ilpo Järvinen) Microsoft Hyper-V host bridge driver: - Annotate struct hv_dr_state with __counted_by (Kees Cook) NVIDIA Tegra194 PCIe controller driver: - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup() already does this via dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) Qualcomm PCIe controller driver: - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed (Manivannan Sadhasivam) - Add a .write_dbi2() callback so DBI2 register writes, e.g., for setting the BAR size, work correctly (Manivannan Sadhasivam) - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core doesn't enable ASPM states that haven't been enabled by the firmware (Manivannan Sadhasivam) Renesas R-Car Gen4 PCIe controller driver: - Add DesignWare core support (set max link width, EDMA_UNROLL flag, .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver (Yoshihiro Shimoda) - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4 controller in both host and endpoint mode (Yoshihiro Shimoda) Xilinx NWL PCIe controller driver: - Update ECAM size to support 256 buses (Thippeswamy Havalige) - Stop setting bridge primary/secondary/subordinate bus numbers, since PCI core does this (Thippeswamy Havalige) Xilinx XDMA controller driver: - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with Xilinx XDMA Soft IP (Thippeswamy Havalige) Miscellaneous: - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT macros (Ilpo Järvinen, Bjorn Helgaas) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Replace unnecessary UTF-8 in Kconfig help text because menuconfig doesn't render it correctly (Liu Song)" * tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits) PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI/AER: Factor out interrupt toggling into helpers PCI: acpiphp: Allow built-in drivers for Attention Indicators PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() ... 
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...