If CONFIG_PCI=n and gcc (e.g. 4.1.2) decides not to inline
get_pci_function_alias_group(), the build fails with:

  drivers/iommu/iommu.o: In function `get_pci_function_alias_group':
  iommu.c:(.text+0xfdc): undefined reference to `pci_acs_enabled'

Due to the various dummies for PCI calls in the CONFIG_PCI=n case,
pci_acs_enabled() never called, but not all versions of gcc are smart
enough to realize that.

While explicitly marking get_pci_function_alias_group() inline would fix
the build, this would inflate the code for the CONFIG_PCI=y case, as
get_pci_function_alias_group() is a not-so-small function called from two
places.

Hence fix the issue by introducing a dummy for pci_acs_enabled() instead.

Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Pull PCI updates from Bjorn Helgaas:

 - add enhanced Downstream Port Containment support, which prints more
   details about Root Port Programmed I/O errors (Dongdong Liu)

 - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)

 - add MediaTek MT2712 and MT7622 support (Ryder Lee)

 - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)

 - add Qualcom IPQ8074 support (Varadarajan Narayanan)

 - add R-Car r8a7743/5 device tree support (Biju Das)

 - add Rockchip per-lane PHY support for better power management (Shawn
   Lin)

 - fix IRQ mapping for hot-added devices by replacing the
   pci_fixup_irqs() boot-time design with a host bridge hook called at
   probe-time (Lorenzo Pieralisi, Matthew Minter)

 - fix race when enabling two devices that results in upstream bridge
   not being enabled correctly (Srinath Mannam)

 - fix pciehp power fault infinite loop (Keith Busch)

 - fix SHPC bridge MSI hotplug events by enabling bus mastering
   (Aleksandr Bezzubikov)

 - fix a VFIO issue by correcting PCIe capability sizes (Alex
   Williamson)

 - fix an INTD issue on Xilinx and possibly other drivers by unifying
   INTx IRQ domain support (Paul Burton)

 - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
   Roedel)

 - allow APM X-Gene device assignment to guests by adding an ACS quirk
   (Feng Kan)

 - fix driver crashes by disabling Extended Tags on Broadcom HT2100
   (Extended Tags support is required for PCIe Receivers but not
   Requesters, and we now enable them by default when Requesters support
   them) (Sinan Kaya)

 - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
   use the real Requester ID (not a phantom RID) (Robin Murphy)

 - prevent assignment of Intel VMD children to guests (which may be
   supported eventually, but isn't yet) by not associating an IOMMU with
   them (Jon Derrick)

 - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
   Bauer)

 - fix a Function-Level Reset issue with Intel 750 NVMe by waiting
   longer (up to 60sec instead of 1sec) for device to become ready
   (Sinan Kaya)

 - fix a Function-Level Reset issue on iProc Stingray by working around
   hardware defects in the CRS implementation (Oza Pawandeep)

 - fix an issue with Intel NVMe P3700 after an iProc reset by adding a
   delay during shutdown (Oza Pawandeep)

 - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
   in compose_msi_msg() (Stephen Hemminger)

 - fix a wireless LAN driver timeout by clearing DesignWare MSI
   interrupt status after it is handled, not before (Faiz Abbas)

 - fix DesignWare ATU enable checking (Jisheng Zhang)

 - reduce Layerscape dependencies on the bootloader by doing more
   initialization in the driver (Hou Zhiqiang)

 - improve Intel VMD performance allowing allocation of more IRQ vectors
   than present CPUs (Keith Busch)

 - improve endpoint framework support for initial DMA mask, different
   BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
   Vijay Abraham I, Stan Drozd)

 - rework CRS support to add periodic messages while we poll during
   enumeration and after Function-Level Reset and prepare for possible
   other uses of CRS (Sinan Kaya)

 - clean up Root Port AER handling by removing unnecessary code and
   moving error handler methods to struct pcie_port_service_driver
   (Christoph Hellwig)

 - clean up error handling paths in various drivers (Bjorn Andersson,
   Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
   Lorenzo Pieralisi, Sergei Shtylyov)

 - clean up SR-IOV resource handling by disabling VF decoding before
   updating the corresponding resource structs (Gavin Shan)

 - clean up DesignWare-based drivers by unifying quirks to update Class
   Code and Interrupt Pin and related handling of write-protected
   registers (Hou Zhiqiang)

 - clean up by adding empty generic pcibios_align_resource() and
   pcibios_fixup_bus() and removing empty arch-specific implementations
   (Palmer Dabbelt)

 - request exclusive reset control for several drivers to allow cleanup
   elsewhere (Philipp Zabel)

 - constify various structures (Arvind Yadav, Bhumika Goyal)

 - convert from full_name() to %pOF (Rob Herring)

 - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
   Lin)

* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: altera: Fix platform_get_irq() error handling
  PCI: spear13xx: Fix platform_get_irq() error handling
  PCI: artpec6: Fix platform_get_irq() error handling
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: exynos: Fix platform_get_irq() error handling
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
  PCI/AER: Reformat AER register definitions
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  ...

* pci/trivial:
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()

* pci/irq-fixups:
  PCI: Inline and remove pcibios_update_irq()
  PCI: Remove unused pci_fixup_irqs() function
  sparc/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  unicore32/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  tile/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  m68k/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  sh/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  sh/PCI: Remove __init optimisations from IRQ mapping functions/data
  MIPS: PCI: Fix pcibios_scan_bus() NULL check code path

* pci/enumeration:
  PCI: Warn periodically while waiting for non-CRS ("device ready") status
  PCI: Wait up to 60 seconds for device to become ready after FLR
  PCI: Factor out pci_bus_wait_crs()
  PCI: Add pci_bus_crs_vendor_id() to detect CRS response data
  PCI: Always check for non-CRS response before timeout
  PCI: Avoid race while enabling upstream bridges
  PCI: Mark Broadcom HT2100 Root Port Extended Tags as broken

Pull rdma updates from Doug Ledford:
 "This is a big pull request.

  Of note is that I'm sending you the new ioctl API for the rdma
  subsystem. We put it up on linux-api@, but didn't get much response.
  The API is complex, but it solves two different problems in one go:

   1) The bi-directional nature of the RDMA file write calls, which
      created the security hole we had to handle (and for which the fix
      is now causing problems for systems in production, we were a bit
      over zealous in the fix and the ability to open a device, then
      fork, then create new queue pairs on the device and use them is
      broken).

   2) The bloat caused by different vendors implementing extensions to
      the base verbs API. Each vendor's hardware is slightly different,
      and the hardware might be suitable for one extension but not
      another.

      By the time we add generic extensions for all the different ways
      that the different hardware can offload things, the API becomes
      bloated. Things like our completion structs have started to exceed
      a cache line in size because of all the elements needed to support
      this. That in turn shows up heavily in the performance graphs with
      a noticable drop in performance on 100Gigabit links as our
      completion structs go from occupying one cache line to 1+.

      This API makes things like the completion structs modular in a
      very similar way to netlink so that your structs can only include
      the items needed for the offloads/features you are actually using
      on a given queue pair. In that way we support everything, but only
      use what we need, and our structs stay smaller.

  The ioctl API is better explained by the posting on linux-api@ than I
  can explain it here, so I'll just leave it at that.

  The rest of the pull request is typical stuff.

  Updates for 4.14 kernel merge window

   - Lots of hfi1 driver updates (mixed with a few qib and core updates
     as well)

   - rxe updates

   - various mlx updates

   - Set default roce type to RoCEv2

   - Several larger fixes for bnxt_re that were too big for -rc

   - Several larger fixes for qedr that, likewise, were too big for -rc

   - Misc core changes

   - Make the hns_roce driver compilable on arches other than aarch64 so
     we can more easily debug build issues related to it

   - Add rdma-netlink infrastructure updates

   - Add automatic IRQ affinity infrastructure

   - Add 32bit lid support

   - Lots of misc fixes across the subsystem from random people

   - Autoloading of RDMA netlink modules

   - PCI pool cleanups from Romain Perier

   - mlx5 driver feature additions and fixes

   - Hardware tag matchine feature

   - Fix sleeping in atomic when resolving roce ah

   - Add experimental ioctl interface as posted to linux-api@"

* tag 'for-linus-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (328 commits)
  IB/core: Expose ioctl interface through experimental Kconfig
  IB/core: Assign root to all drivers
  IB/core: Add completion queue (cq) object actions
  IB/core: Add legacy driver's user-data
  IB/core: Export ioctl enum types to user-space
  IB/core: Explicitly destroy an object while keeping uobject
  IB/core: Add macros for declaring methods and attributes
  IB/core: Add uverbs merge trees functionality
  IB/core: Add DEVICE object and root tree structure
  IB/core: Declare an object instead of declaring only type attributes
  IB/core: Add new ioctl interface
  RDMA/vmw_pvrdma: Fix a signedness
  RDMA/vmw_pvrdma: Report network header type in WC
  IB/core: Add might_sleep() annotation to ib_init_ah_from_wc()
  IB/cm: Fix sleeping in atomic when RoCE is used
  IB/core: Add support to finalize objects in one transaction
  IB/core: Add a generic way to execute an operation on a uobject
  Documentation: Hardware tag matching
  IB/mlx5: Support IB_SRQT_TM
  net/mlx5: Add XRQ support
  ...

The kernel-doc comments don't match the arguments, so fix the comments.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Some drivers (specifically the nes IB driver), want to create a lot of
sysfs driver attributes.  Instead of open-coding the creation and
removal of these files (and getting it wrong btw), it's a better idea to
let the driver core handle all of this logic for us.

So add a new field to the pci driver structure, **groups, that allows
pci drivers to specify an attribute group list it wishes to have created
when it is registered with the driver core.

Big bonus is now the driver doesn't race with userspace when the sysfs
files are created vs. when the kobject is announced, so any script/tool
that actually wanted to use these files will not have to poll waiting
for them to show up.

Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Legacy PCI INTx interrupts are represented in the PCI_INTERRUPT_PIN
register using the range 1-4, which matches our enum pci_interrupt_pin.
This is however not ideal for an IRQ domain, where with 4 interrupts we
would ideally have a domain of size 4 & hwirq numbers in the range 0-3.

Different PCI host controller drivers have handled this in different ways.
Of those under drivers/pci/ which register an INTx IRQ domain, we have:

  - pcie-altera uses the range 1-4 in device trees and an IRQ domain of
    size 5 to cover that range, with entry 0 wasted.

  - pcie-xilinx & pcie-xilinx-nwl use the range 1-4 in device trees but
    register an IRQ domain of size 4, which doesn't cover the hwirq=4/INTD
    case leading to that interrupt being broken.

  - pci-ftpci100 & pci-aardvark use the range 0-3 in both device trees & as
    hwirq numbering in the driver & IRQ domain.

In order to introduce some level of consistency in at least the hwirq
numbering used by the drivers & IRQ domains, this patch introduces a new
pci_irqd_intx_xlate() helper function which drivers using the 1-4 range in
device trees can assign as the xlate callback for their INTx IRQ domain.
This translates the 1-4 range into a 0-3 range, allowing us to use an IRQ
domain of size 4 & avoid a wasted entry. Further patches will make use of
this in drivers to allow them to use an IRQ domain of size 4 for legacy
INTx interrupts without breaking INTD.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull networking fixes from David Miller:

 1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel
    Grumbach.

 2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From
    Vivien Didelot.

 3) Fix two regressions with bonding on wireless, from Andreas Born.

 4) Fix build when busypoll is disabled, from Daniel Borkmann.

 5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet.

 6) Set SKB cached route properly in inet_rtm_getroute(), from Florian
    Westphal.

 7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding
    Tianhong.

 8) Fix module refcnt leak in ULP code, from Sabrina Dubroca.

 9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric
    Dumazet.

10) Need to purge socket write queue in dccp_destroy_sock(), also from
    Eric Dumazet.

11) Make bpf_trace_printk() work properly on 32-bit architectures, from
    Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  bpf: fix bpf_trace_printk on 32 bit archs
  PCI: fix oops when try to find Root Port for a PCI device
  sfc: don't try and read ef10 data on non-ef10 NIC
  net_sched: remove warning from qdisc_hash_add
  net_sched/sfq: update hierarchical backlog when drop packet
  net_sched: reset pointers to tcf blocks in classful qdiscs' destructors
  ipv4: fix NULL dereference in free_fib_info_rcu()
  net: Fix a typo in comment about sock flags.
  ipv6: fix NULL dereference in ip6_route_dev_notify()
  tcp: fix possible deadlock in TCP stack vs BPF filter
  dccp: purge write queue in dccp_destroy_sock()
  udp: fix linear skb reception with PEEK_OFF
  ipv6: release rt6->rt6i_idev properly during ifdown
  af_key: do not use GFP_KERNEL in atomic contexts
  tcp: ulp: avoid module refcnt leak in tcp_set_ulp
  net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
  net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
  PCI: Disable Relaxed Ordering Attributes for AMD A1100
  PCI: Disable Relaxed Ordering for some Intel processors
  PCI: Disable PCIe Relaxed Ordering if unsupported
  ...