Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Extend slot-gpio to be used for host specific card detect interrupts
   - Align to common busy polling behaviour for mmc ioctls
   - Suggest the BFQ I/O scheduler to be built along with MMC/SD support
   - Add devm_mmc_alloc_host() to enable further cleanups in host drivers

  MMC host:
   - atmel-mci: Fix race condition when stopping/starting a command
   - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
   - dw_mmc-rockchip: Add support for the RK3588 variant
   - jz4740: Add support for the vqmmc power supply
   - meson-gx: Convert the DT bindings to the dt-schema
   - meson-gx: Enable the platform interrupt to be used for card detect
   - moxart: Set the supported maximum request/block/segment sizes
   - renesas,sdhi: Add support for the RZ/V2M variants
   - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
   - sdhci-esdhc-imx: Improve tuning logic support
   - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
   - sdhci-of-dwcmshc: Add the missing device table IDs for acpi
   - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
   - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
   - sdhci-pxav2: Add support for the PXA168 V1 variant
   - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
   - uniphier-sd: Add support for SD UHS-I speed modes"

* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
  mmc: meson-gx: constify member data of struct meson_host
  mmc: meson-gx: use devm_clk_get_enabled() for core clock
  mmc: core: fix return value check in devm_mmc_alloc_host()
  dt-bindings: mmc: meson-gx: fix interrupt binding
  mmc: meson-gx: support platform interrupt as card detect interrupt
  dt-bindings: mmc: meson-gx: support specifying cd interrupt
  mmc: core: support setting card detect interrupt from drivers
  mmc: starfive: Add sdio/emmc driver support
  dt-bindings: mmc: Add StarFive MMC module
  dt-bindings: mmc: sdhci-msm: Allow 1 icc path
  dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
  mmc: core: Align to common busy polling behaviour for mmc ioctls
  dt-bindings: mmc: Add resets property to cadence SDHCI binding
  mmc: meson-gx: remove meson_mmc_get_cd
  mmc: moxart: set maximum request/block/segment sizes
  mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
  mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
  mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
  mmc: jz4740: Add support for vqmmc power supply
  ...

On certain platforms like Amlogic Meson gpiod_to_irq() isn't supported
due to the design of gpio / interrupt controller. Therefore provide an
option for drivers to pass the card detect interrupt number
(retrieved e.g. from device tree) to mmc core.

Suggested-by refers to the mechanism to pass and store the interrupt.

Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/5777f38b-465f-ce48-a87f-5eb8b3c57b0a@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add a device-managed version of mmc_alloc_host().

The argument order is reversed compared to mmc_alloc_host() because
device-managed functions typically have the device argument first.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/6d8f9fdc-7c9e-8e4f-e6ef-5470b971c74e@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987,
so reuse the existing mwifiex_reg_sd8987 definition.

Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise
identical, save for the fw_dump_ctrl register:  They define it as 0xf0
whereas mwifiex_reg_sd8987 defines it as 0xf9.  I've verified that
0xf9 is the correct value on SD8978.  NXP's out-of-tree driver uses
0xf9 for all of them, so there's a chance that 0xf0 is not correct
in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions.  I cannot
test that for lack of hardware, hence am leaving it as is.

NXP has only released a firmware which runs Bluetooth over UART.
Perhaps Bluetooth over SDIO is unsupported by this chipset.
Consequently, only an "sdiouart" firmware image is referenced, not an
alternative "sdsd" image.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de

Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD
introduction.  While at it, let's fix one usage where MMC_TRIM_ARGS falsely
included DISCARD too.

Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5")
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports
discard, while they actually don't. This might cause mk2fs to fail while
trying to format the card and revert it to a read-only mode.

To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD)
to indicate that we shall fall-back to use the legacy erase command
instead.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull MMC updates from Ulf Hansson:

 - dt-bindings: Increase maximum supported frequency to 384MHz

 - dw_mmc-rockchip: Add support for the rk3128 variant

 - meson-gx: Add support for SDIO interrupts

 - mtk-sd: Add support for MT6795 Helio X10 variant

 - sdhci: Improve the code by centralizing the CMD/DATA reset handling

 - sdhci-msm:
     - Add support for the sdm670 variant
     - Add support for the sm6115 variant

 - sdhci-omap: Make Vignesh replace Kishon as the maintainer

 - sdhci-pci-o2micro: Disable fragile support for DDR50 in favor of
   SDR50

 - sdhci-sprd: Fix clock divider limitation

* tag 'mmc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (31 commits)
  mmc: sdhci: Centralize CMD and DATA reset handling
  mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS
  mmc: sdhci: Remove misleading comment about resets
  mmc: sdhci: Separate out sdhci_reset_for_all()
  MAINTAINERS: Add Vignesh as maintainer of TI SDHCI OMAP DRIVER
  mmc: sdhci-msm: add compatible string check for sdm670
  dt-bindings: mmc: sdhci-msm: add sdm670 compatible
  mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
  mmc: rtsx_usb_sdmmc: Remove the unneeded result variable
  mmc: sdhci-of-aspeed: Add dependency on ARCH_ASPEED
  mmc: mtk-sd: Add support for MT6795 Helio X10
  mmc: mtk-sd: Reorder of_device_id and platform data by name
  mmc: sdhci-sprd: Fix the limitation of div
  dt-bindings: mmc: sdhci-msm: Add pinctrl-1 property
  dt-bindings: mmc: rockchip: add rockchip,rk3128-dw-mshc
  dt-bindings: mmc: renesas,sdhi: Add iommus property
  mmc: sdhci_am654: Remove the unneeded result variable
  mmc: meson-gx: add SDIO interrupt support
  mmc: meson-gx: adjust and re-use constant IRQ_EN_MASK
  mmc: jz4740_mmc: Fix error check for dma_map_sg
  ...

The delay parameter isn't set by any user, therefore simplify the code
and switch to the basic workqueue API w/o delay support. This also
reduces the size of struct mmc_host.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/13d8200a-e2a8-d907-38ce-a16fc5ce14aa@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
Add the firmware mapping structures for the CYW43439 chipset.
The 43439 needs some things setup similar to the 43430 chipset.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de

If wakeup-source flag is set in host dts node, parse EAI information
from SDIO CCCR interrupt externsion segment for in-band wakeup. If
async interrupt is supported by SDIO card then enable it and set
enable_async_irq flag in sdio_cccr structure to 1. The parse flow is
implemented in sdio_read_cccr().

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
Link: https://lore.kernel.org/r/20220726062842.18846-3-axe.yang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>