Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Update maintainer and URL for the mmc-utils - Set default label for slot-gpio in case of no con-id - Convert MMC card DT bindings to a schema - Add optional host specific tuning support for eMMC HS400 - Add error handling of add_disk() MMC host: - mtk-sd: Add host specific tuning support for eMMC HS400 - mtk-sd: Make DMA handling more robust - dw_mmc: Prevent hangs for some data writes - dw_mmc: Move away from using the ->init_card() callback - mxs-mmc: Manage the regulator in the error path and in ->remove() - sdhci-cadence: Add support for the Microchip MPFS variant - sdhci-esdhc-imx: Add support for the NXP S32G2 variant - sdhci-of-arasan: Add support for the Intel Thunder Bay variant - sdhci-omap: Prepare to support more SoCs - sdhci-omap: Add support for omap3 and omap4 variants - sdhci-omap: Add support for power management - sdhci-omap: Add support for system wakeups - sdhci-msm: Add support for the msm8226 variant - sdhci-sprd: Verify that the DLL locks according to spec MEMSTICK: - Add error handling of add_disk() - A couple of small fixes and improvements" * tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits) docs: mmc: update maintainer name and URL mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section mmc: sdhci-esdhc-imx: add NXP S32G2 support dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support mmc: dw_mmc: Drop use of ->init_card() callback mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save() memstick: r592: Fix a UAF bug when removing the driver mmc: mxs-mmc: disable regulator on error and in the remove function mmc: sdhci-omap: Configure optional wakeirq mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM mmc: sdhci-omap: Implement PM runtime functions mmc: sdhci-omap: Add omap_offset to support omap3 and earlier mmc: sdhci-omap: Handle voltages to add support omap4 dt-bindings: sdhci-omap: Update binding for legacy SoCs mmc: sdhci-pci: Remove dead code (rst_n_gpio et al) mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al) mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al) mmc: sdhci: Remove unused prototype declaration in the header ...
blk_keyslot_manager is misnamed because it doesn't necessarily manage
keyslots. It actually does several different things:
- Contains the crypto capabilities of the device.
- Provides functions to control the inline encryption hardware.
Originally these were just for programming/evicting keyslots;
however, new functionality (hardware-wrapped keys) will require new
functions here which are unrelated to keyslots. Moreover,
device-mapper devices already (ab)use "keyslot_evict" to pass key
eviction requests to their underlying devices even though
device-mapper devices don't have any keyslots themselves (so it
really should be "evict_key", not "keyslot_evict").
- Sometimes (but not always!) it manages keyslots. Originally it
always did, but device-mapper devices don't have keyslots
themselves, so they use a "passthrough keyslot manager" which
doesn't actually manage keyslots. This hack works, but the
terminology is unnatural. Also, some hardware doesn't have keyslots
and thus also uses a "passthrough keyslot manager" (support for such
hardware is yet to be upstreamed, but it will happen eventually).
Let's stop having keyslot managers which don't actually manage keyslots.
Instead, rename blk_keyslot_manager to blk_crypto_profile.
This is a fairly big change, since for consistency it also has to update
keyslot manager-related function names, variable names, and comments --
not just the actual struct name. However it's still a fairly
straightforward change, as it doesn't change any actual functionality.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for renaming struct blk_keyslot_manager to struct blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c source files. Renaming these files separately before making a lot of changes to their contents makes it easier for git to understand that they were renamed. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
The last user of this struct gone a couple of releases ago.
Besides that there were not so many users of this API for
more than 10 years:
1/ The one is Intel Merrifield, that had been added 2016-08-31
by the commit 3976b0380b31 ("x86/platform/intel-mid: Enable
SD card detection on Merrifield") and removed 2021-02-11 by
the commit 4590d98f5a4f ("sfi: Remove framework for deprecated
firmware").
2/ The other is Intel Sunrisepoint related, that had been added
2015-02-06 by the commit e1bfad6d936d ("mmc: sdhci-pci: Add
support for drive strength selection for SPT") and removed
2017-03-20 by the commit 51ced59cc02e ("mmc: sdhci-pci: Use
ACPI DSM to get driver strength for some Intel devices").
Effectively this is a revert of the commit 52c506f0bc72 ("mmc:
sdhci-pci: add platform data").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20211014132613.27861-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This adds a ->execute_hs400_tuning() host callback to enable optional support for host specific tuning for eMMC HS400 mode. Additionally, share mmc_get_ext_csd() through the public host headerfile, to allow it to be used by the host drivers, which is needed to support the HS400 tuning. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Link: https://lore.kernel.org/r/20210917124803.22871-3-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Return a proper response in case of an ioctl error - Issue HPI to interrupt BKOPS for eMMC if it timed out - Avoid hogging the CPU while polling for busy - Extend sd8787 pwrseq to support the wilc1000 SDIO - Remove a couple of confusing warning messages - Clarify comment for ->card_busy() host ops MMC host: - dw_mmc: Add data CRC error injection - mmci: De-assert reset during ->probe() - rtsx_pci: Fix long reads when clock is pre-scaled - sdhci: Correct the tuning command handle for PIO mode - sdhci-esdhc-imx: Improve support for auto tuning - sdhci-msm: Add support for the sc7280 - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP - sdhci-of-arasan: Enable support for auto cmd12 - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter - usdhi6rol0: Implement the ->card_busy() host ops MEMSTICK: - A couple of minor cleanups" * tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: queue: Remove unused parameters(request_queue) mmc: pwrseq: sd8787: fix compilation warning mmc: core: Return correct emmc response in case of ioctl error mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning mmc: core: Issue HPI in case the BKOPS timed out mmc: queue: Match the data type of max_segments mmc: switch from 'pci_' to 'dma_' API memstick: switch from 'pci_' to 'dma_' API memstick: r592: Change the name of the 'pci_driver' structure to be consistent mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 mmc: pwrseq: sd8787: add support for wilc1000 dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000 dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning mmc: core: Update ->card_busy() callback comment mmc: usdhi6rol0: Implement card_busy function mmc: sdhci: Correct the tuning command handle for PIO mode ...
Support generic alternative_gpt_sector() block device operation. It calculates location of GPT entry for eMMC of NVIDIA Tegra Android devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of alternative GPT sector and add raw_boot_mult field to mmc_ext_csd which allows to get size of the boot partitions that is needed for the calculation. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to SD specification checking state of DAT0 only, is enough while polling for card busy completion. Let's update the comment in the header file to correct this, as the comment says DAT[0:3]. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20210816153054.24082-1-marten.lindahl@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Make 'struct mmc_request' contain a pointer to the request's 'struct bio_crypt_ctx' directly, instead of extracting a 32-bit DUN from it which is a cqhci-crypto specific detail. This keeps the cqhci crypto specific details in the cqhci module, and it makes mmc_core and mmc_block ready for MMC crypto hardware that accepts the DUN and/or key in a way that is more flexible than that which will be specified by the eMMC v5.2 standard. Exynos SoCs are an example of such hardware, as their inline encryption hardware takes keys directly (it has no concept of keyslots) and supports 128-bit DUNs. Note that the 32-bit DUN length specified by the standard is very restrictive, so it is likely that more hardware will support longer DUNs despite it not following the standard. Thus, limiting the scope of the 32-bit DUN assumption to the place that actually needs it is warranted. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20210721154738.3966463-1-ebiggers@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>