linux.git/include/linux/mmc/card.h, branch v3.8

mmc: core: Expose access to RPMB partition

2012-12-06T18:54:46+00:00

Following JEDEC standard, if the mmc supports RPMB partition,
a new interface is created and exposed via /dev/block.
Users will be able to access RPMB partition using standard
mmc IOCTL commands.

Signed-off-by: Alex Macro 
Signed-off-by: Loic Pallardy 
Reviewed-by: Namjae Jeon 
Acked-by: Linus Walleij 
Acked-by: Johan Rudholm 
Acked-by: Krishna Konda 
Signed-off-by: Chris Ball

mmc: core: Fixup broken suspend and eMMC4.5 power off notify

2012-10-07T21:41:45+00:00

This patch fixes up the broken suspend sequence for eMMC with sleep
support. Additionally it reworks the eMMC4.5 Power Off Notification
feature so it fits together with the existing sleep feature.

The CMD0 based re-initialization of the eMMC at resume is re-introduced
to maintain compatiblity for devices using sleep.

A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off
Notification feature. We might be able to remove this cap later on,
if we think that Power Off Notification always is preferred over
sleep, even if the host is not able to cut the eMMC VCCQ power.

Signed-off-by: Ulf Hansson 
Signed-off-by: Saugata Das 
Acked-by: Linus Walleij 
Signed-off-by: Chris Ball

mmc: support BKOPS feature for eMMC

2012-10-03T14:05:12+00:00

Enable eMMC background operations (BKOPS) feature.

If URGENT_BKOPS is set after a response, note that BKOPS are required.
Immediately run BKOPS if required.  Read/write operations should be
requested during BKOPS(LEVEL-1), then issue HPI to interrupt the
ongoing BKOPS and service the foreground operation.
(This patch only controls the LEVEL2/3.)

When repeating the writing 1GB data, at a certain time, performance is
decreased.  At that time, card triggers the Level-3 or Level-2.  After
running bkops, performance is recovered.

Future considerations:
 * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
 * Interrupt ongoing BKOPS before powering off the card.
 * How do we get BKOPS_STATUS value (periodically send ext_csd command)?
 * If using periodic bkops, also consider runtime_pm control.

Signed-off-by: Jaehoon Chung 
Signed-off-by: Kyungmin Park 
Signed-off-by: Konstantin Dorfman 
Reviewed-by: Maya Erez 
Signed-off-by: Chris Ball

mmc: card: Skip secure erase on MoviNAND; causes unrecoverable corruption.

2012-09-04T17:58:10+00:00

For several MoviNAND eMMC parts, there are known issues with secure
erase and secure trim.  For these specific MoviNAND devices, we skip
these operations.

Specifically, there is a bug in the eMMC firmware that causes
unrecoverable corruption when the MMC is erased with MMC_CAP_ERASE
enabled.

References:

http://forum.xda-developers.com/showthread.php?t=1644364
https://plus.google.com/111398485184813224730/posts/21pTYfTsCkB#111398485184813224730/posts/21pTYfTsCkB

Signed-off-by: Ian Chen 
Reviewed-by: Namjae Jeon 
Acked-by: Jaehoon Chung 
Reviewed-by: Linus Walleij 
Cc: stable  [3.0+]
Signed-off-by: Chris Ball

mmc: sdhci: only set 200mA support for 1.8v if 200mA is available

2012-07-21T04:02:23+00:00

max_current_caps can return 0 if not available from the sd controller.
If no regulator is present or the regulator specifies a current
less then 200ma, we no longer still set the 200mA caps bit anyway.

Signed-off-by: Philip Rakity 
Reviewed-by: Aaron Lu 
Signed-off-by: Chris Ball

mmc: core: fix the decision of HS200/DDR card-type

2012-05-09T14:03:21+00:00

Current implementation decides the card type exclusively. Even though
eMMC device can support both HS200 and DDR mode, card type will be
set only for HS200. If the host doesn't support HS200 but has DDR
capability, then DDR mode can't be selected.

Signed-off-by: Seungwon Jeon 
Reviewed-by: Subhash Jadavani 
Signed-off-by: Chris Ball

mmc: remove MMC bus legacy suspend/resume method

2012-04-21T00:30:19+00:00

MMC bus is using legacy suspend/resume method, which is not compatible if
runtime pm callbacks are used. In this scenario, MMC bus suspend/resume
callbacks cannot be called when system entering S3. So change to use the
new defined dev_pm_ops for system sleeping mode.

Tested on AM335x Platform. Solves major issue/crash reported at
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.html

Signed-off-by: Chuanxiao Dong 
Tested-by: Hebbar, Gururaja 
Acked-by: Linus Walleij 
Acked-by: Ulf Hansson 
Signed-off-by: Chris Ball

Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

2012-03-29T03:59:45+00:00

Pull MMC updates from Chris Ball:

Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.

Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.

* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: sh_mmcif: simplify bitmask macros
mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
mmc: sh_mobile_sdhi: add a callback for board specific init code
mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
mmc: sh_mobile_sdhi: do not manage PM clocks manually
mmc: tmio_mmc: remove unused sdio_irq_enabled flag
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
mmc: tmio: calculate the native hotplug condition only once
mmc: simplify mmc_cd_gpio_request() by removing two parameters
mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
mmc: sdhci: check interrupt flags in ISR again
mmc: sdhci-pci: Add MSI support
mmc: core: warn when card doesn't support HPI
mmc: davinci: Poll status for small size transfers
mmc: davinci: Eliminate spurious interrupts
mmc: omap_hsmmc: Avoid a regulator voltage change with dt
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
...

mmc: MMC-4.5 Data Tag Support

2012-03-25T23:33:44+00:00

MMC-4.5 data tag feature will be used to store the file system meta-data
in the tagged region of eMMC. This will improve the write and subsequent
read transfer time for the meta data.

Signed-off-by: Saugata Das 
Tested-by: Venkatraman S 
Signed-off-by: Chris Ball

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37+00:00

Pull  avoidance patches from Paul Gortmaker:
 "Nearly every subsystem has some kind of header with a proto like:

	void foo(struct device *dev);

  and yet there is no reason for most of these guys to care about the
  sub fields within the device struct.  This allows us to significantly
  reduce the scope of headers including headers.  For this instance, a
  reduction of about 40% is achieved by replacing the include with the
  simple fact that the device is some kind of a struct.

  Unlike the much larger module.h cleanup, this one is simply two
  commits.  One to fix the implicit  users, and then one
  to delete the device.h includes from the linux/include/ dir wherever
  possible."

* tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  device.h: audit and cleanup users in main include dir
  device.h: cleanup users outside of linux/include (C files)