linux.git/include/linux/mlx5, branch v5.9-rc2

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-08-06T23:43:36+00:00

Pull rdma updates from Jason Gunthorpe:
 "A quiet cycle after the larger 5.8 effort. Substantially cleanup and
  driver work with a few smaller features this time.

   - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re

   - Removal of dead or redundant code across the drivers

   - RAW resource tracker dumps to include a device specific data blob
     for device objects to aide device debugging

   - Further advance the IOCTL interface, remove the ability to turn it
     off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands

   - Remove stubs related to devices with no pkey table

   - A shared CQ scheme to allow multiple ULPs to share the CQ rings of
     a device to give higher performance

   - Several more static checker, syzkaller and rare crashers fixed"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
  RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
  RDMA/rxe: Remove pkey table
  RDMA/umem: Add a schedule point in ib_umem_get()
  RDMA/hns: Fix the unneeded process when getting a general type of CQE error
  RDMA/hns: Fix error during modify qp RTS2RTS
  RDMA/hns: Delete unnecessary memset when allocating VF resource
  RDMA/hns: Remove redundant parameters in set_rc_wqe()
  RDMA/hns: Remove support for HIP08_A
  RDMA/hns: Refactor hns_roce_v2_set_hem()
  RDMA/hns: Remove redundant hardware opcode definitions
  RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
  RDMA/include: Replace license text with SPDX tags
  RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
  RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
  RDMA/cma: Execute rdma_cm destruction from a handler properly
  RDMA/cma: Remove unneeded locking for req paths
  RDMA/cma: Using the standard locking pattern when delivering the removal event
  RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
  RDMA/efa: Add EFA 0xefa1 PCI ID
  RDMA/efa: User/kernel compatibility handshake mechanism
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-08-02T08:02:12+00:00

Resolved kernel/bpf/btf.c using instructions from merge commit
69138b34a7248d2396ab85c8652e20c0c39beaba

Signed-off-by: David S. Miller

net/mlx5e: Modify uplink state on interface up/down

2020-07-28T19:55:51+00:00

When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.

This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.

When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".

Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin 
Reviewed-by: Roi Dayan 
Reviewed-by: Moshe Shemesh 
Signed-off-by: Saeed Mahameed

net/mlx5: Hold pages RB tree per VF

2020-07-28T09:37:26+00:00

Per page request event, FW request to allocated or release pages for a
single function. Driver maintains FW pages object per function, so there
is no need to hold one global page data-base. Instead, have a page
data-base per function, which will improve performance release flow in all
cases, especially for "release all pages".

As the range of function IDs is large and not sequential, use xarray to
store a per function ID page data-base, where the function ID is the key.

Upon first allocation of a page to a function ID, create the page
data-base per function. This data-base will be released only at pagealloc
mechanism cleanup.

NIC: ConnectX-4 Lx
CPU: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz
Test case: 32 VFs, measure release pages on one VF as part of FLR
Before: 0.021 Sec
After:  0.014 Sec

The improvement depends on amount of VFs and memory utilization
by them. Time measurements above were taken from idle system.

Signed-off-by: Eran Ben Elisha 
Reviewed-by: Mark Bloch 
Signed-off-by: Saeed Mahameed

RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7

2020-07-27T14:19:00+00:00

Up to ConnectX-7 UMR is not used when user passes relaxed ordering access
flag. ConnectX-7 supports setting relaxed ordering read/write mkey
attribute by UMR, indicated by new HCA capabilities.

With ConnectX-7 driver uses UMR when user set relaxed ordering access
flag, in contrast to previous silicon models. Specifically it includes
setting relvant flags of mkey context mask in UMR control segment, and
relaxed ordering write and read flags in UMR mkey context segment.

Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.org
Signed-off-by: Meir Lichtinger 
Reviewed-by: Michael Guralnik 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe

RDMA/mlx5: Use MLX5_SET macro instead of local structure

2020-07-27T14:19:00+00:00

Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX
device data structures instead of using structure defined specifically for
mlx5_ib module.

Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.org
Signed-off-by: Meir Lichtinger 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe

RDMA/mlx5: ConnectX-7 new capabilities to set relaxed ordering by UMR

2020-07-24T19:28:29+00:00

Up to ConnectX-7 setting mkey relaxed ordering read/write attributes
by UMR is not supported. ConnectX-7 supports this option, which is
indicated by two new HCA capabilities - relaxed_ordering_write_umr
and relaxed_ordering_read_umr.

Signed-off-by: Meir Lichtinger 
Signed-off-by: Leon Romanovsky

net/mlx5: Add IPsec related Flow steering entry's fields

2020-07-16T23:36:46+00:00

Add FTE actions IPsec ENCRYPT/DECRYPT
Add ipsec_obj_id field in FTE
Add new action field MLX5_ACTION_IN_FIELD_IPSEC_SYNDROME

Signed-off-by: Huy Nguyen 
Reviewed-by: Raed Salem 
Signed-off-by: Saeed Mahameed

net/mlx5: Accel, Add core IPsec support for the Connect-X family

2020-07-16T23:36:42+00:00

This to set the base for downstream patches to support
the new IPsec implementation of the Connect-X family.

Following modifications made:
- Remove accel layer dependency from MLX5_FPGA_IPSEC.
- Introduce accel_ipsec_ops, each IPsec device will
  have to support these ops.

Signed-off-by: Raed Salem 
Reviewed-by: Tariq Toukan 
Signed-off-by: Saeed Mahameed

net/mlx5: Add interface changes required for VDPA

2020-07-16T05:21:29+00:00

Rename mlx5_ifc_device_virtio_emulation_cap_bits to
mlx5_ifc_virtio_emulation_cap_bits to match names produced by the
tools producing these auto generated files.

In addition missing capabilities that will be required by VDPA
implementation.

Signed-off-by: Eli Cohen 
Reviewed-by: Parav Pandit 
Signed-off-by: Saeed Mahameed