Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
    Cheng.

 3) Orphan NFC, we'll take the patches directly into my tree. From
    Johannes Berg.

 4) We can't recycle cloned TCP skbs, from Eric Dumazet.

 5) Some flow dissector bpf test fixes, from Stanislav Fomichev.

 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.

 7) Fix some potential fib6 leaks, from Eric Dumazet.

 8) Fix a _decode_session4 uninitialized memory read bug fix that got
    lost in a merge. From Florian Westphal.

 9) Fix ipv6 source address routing wrt. exception route entries, from
    Wei Wang.

10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
    driver, fix from Tariq Toukan.

11) Clean up botched merge on netfilter kselftest, from Florian
    Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
  of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
  net: fix kernel-doc warnings for socket.c
  net: Treat sock->sk_drops as an unsigned int when printing
  kselftests: netfilter: fix leftover net/net-next merge conflict
  mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
  mlxsw: core: Prevent QSFP module initialization for old hardware
  vsock/virtio: Initialize core virtio vsock before registering the driver
  net/mlx5e: Fix possible modify header actions memory leak
  net/mlx5e: Fix no rewrite fields with the same match
  net/mlx5e: Additional check for flow destination comparison
  net/mlx5e: Add missing ethtool driver info for representors
  net/mlx5e: Fix number of vports for ingress ACL configuration
  net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
  net/mlx5e: Fix wrong xmit_more application
  net/mlx5: Fix peer pf disable hca command
  net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
  net/mlx5: Add meaningful return codes to status_to_err function
  net/mlx5: Imply MLXFW in mlx5_core
  Revert "tipc: fix modprobe tipc failed after switch order of device registration"
  vsock/virtio: free packets during the socket release
  ...

To avoid any ambiguity between vport index and vport number,
rename functions that had vport, to vport_num or vport_index appropriately.

vport_num is u16 hence change mlx5_eswitch_index_to_vport_num() return
type to u16.

vport_index is an int in vport array. Hence change input type of vport
index in mlx5_eswitch_index_to_vport_num() to int.

Correct multiple eswitch representor interfaces use type u16 of
rep->vport as type int vport_index.

Send vport FW commands with correct eswitch u16 vport_num instead
host int vport_index.

Fixes: 5ae5162066d8 ("net/mlx5: E-Switch, Assign a different position for uplink rep and vport")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Pull more rdma updates from Jason Gunthorpe:
 "This is being sent to get a fix for the gcc 9.1 build warnings, and
  I've also pulled in some bug fix patches that were posted in the last
  two weeks.

   - Avoid the gcc 9.1 warning about overflowing a union member

   - Fix the wrong callback type for a single response netlink to doit

   - Bug fixes from more usage of the mlx5 devx interface"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  net/mlx5: Set completion EQs as shared resources
  IB/mlx5: Verify DEVX general object type correctly
  RDMA/core: Change system parameters callback from dumpit to doit
  RDMA: Directly cast the sockaddr union to sockaddr

Mark completion EQs as shared resources so that they can be used by CQs
with uid != 0.

Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Pull rdma updates from Jason Gunthorpe:
 "This has been a smaller cycle than normal. One new driver was
  accepted, which is unusual, and at least one more driver remains in
  review on the list.

  Summary:

   - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4,
     vmw_pvrdma

   - Many patches from MatthewW converting radix tree and IDR users to
     use xarray

   - Introduction of tracepoints to the MAD layer

   - Build large SGLs at the start for DMA mapping and get the driver to
     split them

   - Generally clean SGL handling code throughout the subsystem

   - Support for restricting RDMA devices to net namespaces for
     containers

   - Progress to remove object allocation boilerplate code from drivers

   - Change in how the mlx5 driver shows representor ports linked to VFs

   - mlx5 uapi feature to access the on chip SW ICM memory

   - Add a new driver for 'EFA'. This is HW that supports user space
     packet processing through QPs in Amazon's cloud"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits)
  RDMA/ipoib: Allow user space differentiate between valid dev_port
  IB/core, ipoib: Do not overreact to SM LID change event
  RDMA/device: Don't fire uevent before device is fully initialized
  lib/scatterlist: Remove leftover from sg_page_iter comment
  RDMA/efa: Add driver to Kconfig/Makefile
  RDMA/efa: Add the efa module
  RDMA/efa: Add EFA verbs implementation
  RDMA/efa: Add common command handlers
  RDMA/efa: Implement functions that submit and complete admin commands
  RDMA/efa: Add the ABI definitions
  RDMA/efa: Add the com service API definitions
  RDMA/efa: Add the efa_com.h file
  RDMA/efa: Add the efa.h header file
  RDMA/efa: Add EFA device definitions
  RDMA: Add EFA related definitions
  RDMA/umem: Remove hugetlb flag
  RDMA/bnxt_re: Use core helpers to get aligned DMA address
  RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
  RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
  RDMA/umem: Add API to find best driver supported page size in an MR
  ...

When the state of rep was introduced, it was also designed to prevent
duplicate unloading of the same rep. Considering the following two
flows when an eswitch manager is at switchdev mode with n VF reps loaded.

+--------------------------------------+--------------------------------+
| cpu-0                                | cpu-1                          |
| --------                             | --------                       |
| mlx5_ib_remove                       | mlx5_eswitch_disable_sriov     |
|  mlx5_ib_unregister_vport_reps       |  esw_offloads_cleanup          |
|   mlx5_eswitch_unregister_vport_reps |   esw_offloads_unload_all_reps |
|    __unload_reps_all_vport           |    __unload_reps_all_vport     |
+--------------------------------------+--------------------------------+

These two flows will try to unload the same rep. Per original design,
once one flow unloads the rep, the state moves to REGISTERED. The 2nd
flow will no longer needs to do the unload and bails out. However, as
read and write of the state is not atomic, when 1st flow is doing the
unload, the state is still LOADED, 2nd flow is able to do the same
unload action. Kernel crash will happen.

To solve this, driver should do atomic test-and-set for the state. So
that only one flow can change the rep state from LOADED to REGISTERED,
and proceed to do the actual unloading.

Since the state is changing to atomic type, all other read/write should
be atomic action as well.

Fixes: f121e0ea9586 (net/mlx5: E-Switch, Add state to eswitch vport representors)
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5_query_nic_vport_vlans() is not used anymore. Hence remove it.
This patch doesn't change any functionality.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add the support to read additional EEPROM information from high pages.
Information for modules such as SFF-8436 and SFF-8636:
 1) Application select table
 2) User writable EEPROM
 3) Thresholds and alarms

Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This merge commit includes some misc shared code updates from mlx5-next branch needed
for net-next.

1) From Aya: Enable general events on all physical link types and
   restrict general event handling of subtype DELAY_DROP_TIMEOUT in mlx5 rdma
   driver to ethernet links only as it was intended.

2) From Eli: Introduce low level bits for prio tag mode

3) From Maor: Low level steering updates to support RDMA RX flow
   steering and enables RoCE loopback traffic when switchdev is enabled.

4) From Vu and Parav: Two small mlx5 core cleanups

5) From Yevgeny add HW definitions of geneve offloads

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The cited commit broke the offsets of hca cap struct, fix it.
While at it, cleanup a white space introduced by the same commit.

Fixes: b169e64a2444 ("net/mlx5: Geneve, Add flow table capabilities for Geneve decap with TLV options")
Reported-by: Qian Cai <cai@lca.pw>
Cc: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>