linux.git/include/linux/mlx4, branch v4.13

net/mlx4_en: Fix wrong indication of Wake-on-LAN (WoL) support

2017-08-02T17:44:09+00:00

Currently when WoL is supported but disabled, ethtool reports:
"Supports Wake-on: d".
Fix the indication of Wol support, so that the indication
remains "g" all the time if the NIC supports WoL.

Tested:
As accepted, when NIC supports WoL- ethtool reports:
	Supports Wake-on: g
	Wake-on: d
when NIC doesn't support WoL- ethtool reports:
        Supports Wake-on: d
        Wake-on: d

Fixes: 14c07b1358ed ("mlx4: Wake on LAN support")
Signed-off-by: Inbar Karmy 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

{net, IB}/mlx4: Remove gfp flags argument

2017-07-18T01:21:24+00:00

The caller to the driver marks GFP_NOIO allocations with help
of memalloc_noio-* calls now. This makes redundant to pass down
to the driver gfp flags, which can be GFP_KERNEL only.

The patch removes the gfp flags argument and updates all driver paths.

Signed-off-by: Leon Romanovsky 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford

net/mlx4: Fix the check in attaching steering rules

2017-06-05T03:10:05+00:00

Our previous patch (cited below) introduced a regression
for RAW Eth QPs.

Fix it by checking if the QP number provided by user-space
exists, hence allowing steering rules to be added for valid
QPs only.

Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring")
Reported-by: Or Gerlitz 
Signed-off-by: Talat Batheesh 
Signed-off-by: Tariq Toukan 
Acked-by: Or Gerlitz 
Reviewed-by: Leon Romanovsky 
Signed-off-by: David S. Miller

treewide: spelling: correct diffrent[iate] and banlance typos

2017-05-09T00:15:13+00:00

Add these misspellings to scripts/spelling.txt too

Link: http://lkml.kernel.org/r/962aace119675e5fe87be2a88ddac1a5486f8e60.1490931810.git.joe@perches.com
Signed-off-by: Joe Perches 
Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

IB/mlx4: Support RAW Ethernet when RoCE is disabled

2017-04-21T16:26:05+00:00

On some environments, such as certain SR-IOV VF configurations, RoCE
isn't supported for mlx4 Ethernet ports. Currently the driver will
not open IB device on that port.

This is problematic since we do want user-space RAW Ethernet QPs functionality
to remain in place. For that end, enhance the relevant driver flows such that we
do create a device instance in that case.

Signed-off-by: Majd Dibbiny 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford

net/mlx4_core: Avoid delays during VF driver device shutdown

2017-03-17T03:14:51+00:00

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.

The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).

The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.

This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.

Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: Jack Morgenstein 
Reported-by: Simon Xiao 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4: && vs & typo

2017-03-01T17:50:58+00:00

Bitwise & was obviously intended here.

Fixes: 745d8ae4622c ("net/mlx4: Spoofcheck and zero MAC can't coexist")
Signed-off-by: Dan Carpenter 
Reviewed-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4: Spoofcheck and zero MAC can't coexist

2017-02-23T15:57:56+00:00

Spoofcheck can't be enabled if VF MAC is zero.
Vice versa, can't zero MAC if spoofcheck is on.

Fixes: 8f7ba3ca12f6 ('net/mlx4: Add set VF mac address support')
Signed-off-by: Eugenia Emantayev 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4_en: Pass user MTU value to Firmware at set port command

2017-01-30T20:26:43+00:00

When starting the port, driver will inform Firmware about the actual MTU
which does not include implicit headers, such as FCS or VLAN tags.

Signed-off-by: Shaker Daibes 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4_en: Adding support of turning off link autonegotiation via ethtool

2017-01-30T20:26:42+00:00

This feature will allow the user to disable auto negotiation
on the port for mlx4 devices while setting the speed is limited
to 1GbE speeds.
Other speeds will not be accepted in autoneg off mode.

This functionality is permitted providing that the firmware
is compatible with this feature.
The above is determined by querying a new dedicated capability
bit in the device.

Signed-off-by: Ariel Levkovich 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller