linux.git/include/linux/mlx4, branch v4.0

net/mlx4_core: Fix wrong mask and error flow for the update-qp command

2015-03-02T20:27:19+00:00

The bit mask for currently supported driver features (MLX4_UPDATE_QP_SUPPORTED_ATTRS)
of the update-qp command was defined twice (using enum value and pre-processor
define directive) and wrong.

The return value of the call to mlx4_update_qp() from within the SRIOV
resource-tracker was wrongly voided down.

Fix both issues.

issue: none
Fixes: 09e05c3f78e9 ('net/mlx4: Set vlan stripping policy by the right command')
Fixes: ce8d9e0d6746 ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support')
Signed-off-by: Matan Barak 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller

IB/mlx4: Reset flow support for IB kernel ULPs

2015-02-09T22:03:53+00:00

The driver exposes interfaces that directly relate to HW state. Upon fatal
error, consumers of these interfaces (ULPs) that rely on completion of
all their posted work-request could hang, thereby introducing dependencies
in shutdown order.  To prevent this from happening, we manage the
relevant resources (CQs, QPs) that are used by the device. Upon a fatal error,
we now generate simulated completions for outstanding WQEs that were not
completed at the time the HW was reset.

It includes invoking the completion event handler for all involved CQs so that
the ULPs will poll those CQs. When polled we return simulated CQEs with
IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and
not wait forever for completions upon receiving remove_one.

The above change requires an extra check in the data path to make sure that when
device is in error state, the simulated CQEs will be returned and no further
WQEs will be posted.

Signed-off-by: Yishai Hadas 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-02-05T22:33:28+00:00

Conflicts:
	drivers/net/vxlan.c
	drivers/vhost/net.c
	include/linux/if_vlan.h
	net/core/dev.c

The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.

In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.

In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.

In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.

Signed-off-by: David S. Miller

net/mlx4_core: Port aggregation upper layer interface

2015-02-05T00:14:24+00:00

Supply interface functions to bond and unbond ports of a mlx4 internal
interfaces. Example for such an interface is the one registered by the
mlx4 IB driver under RoCE.

There are

1. Functions to go in/out to/from bonded mode
2. Function to remap virtual ports to physical ports

The bond_mutex prevents simultaneous access to data that keep status of
the device in bonded mode.

The upper mlx4 interface marks to the mlx4 core module that they
want to be subject for such bonding by setting the MLX4_INTFF_BONDING
flag. Interface which goes to/from bonded mode is re-created.

The mlx4 Ethernet driver does not set this flag when registering the
interface, the IB driver does.

Signed-off-by: Moni Shoua 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller

net/mlx4_core: Port aggregation low level interface

2015-02-05T00:14:24+00:00

Implement the hardware interface required for port aggregation.

1. Disable RX port check on receive - don't perform a validity check
that matches to QP's port and the port where the packet is received.

2. Virtual to physical port remap - configure virtual to physical port
mapping. Port remap capability for virtual functions.

Signed-off-by: Moni Shoua 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller

net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs

2015-02-03T03:38:04+00:00

Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to
allow up to 126 VFs.  However, due to leaving MLX4_MFUNC_MAX too low, using
more than 80 VFs resulted in memory corruptions (and Oopses) when more than
80 VFs were requested. In addition, the number of slaves was left too high.

This commit fixes these issues.

Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller

net/mlx4_core: Adjust command timeouts to conform to the firmware spec

2015-01-28T01:12:57+00:00

The firmware spec states that the timeout for all commands should be 60 seconds.

In the past, the spec indicated that there were several classes of timeout
(short, medium, and long).  The driver has these different timeout classes.
We leave the class differentiation in the driver as-is (to protect against any
future spec changes), but set the timeout for all classes to be 60 seconds.

In addition, we fix a few commands which had hard-coded numeric timeouts specified.

Signed-off-by: Jack Morgenstein 
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller

net/mlx4_core: Add bad-cable event support

2015-01-28T01:12:57+00:00

If the firmware can detect a bad cable, allow it to generate an
event, and print the problem in the log.

Signed-off-by: Jack Morgenstein 
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller

net/mlx4_core: Enable device recovery flow with SRIOV

2015-01-25T22:43:14+00:00

In SRIOV, both the PF and the VF may attempt device recovery whenever they
assume that the device is not functioning.  When the PF driver resets the
device, the VF should detect this and attempt to reinitialize itself.

The VF must be able to reset itself under all circumstances, even
if the PF is not responsive.

The VF shall reset itself in the following cases:

1. Commands are not processed within reasonable time over the communication channel.
This is done considering device state and the correct return code based on
the command as was done in the native mode, done in the next patch.

2. The VF driver receives an internal error event reported by the PF on the
communication channel. This occurs when the PF driver resets the device or
when VF is out of sync with the PF.

Add 'VF reset' capability, which allows the VF to reinitialize itself even when the
PF is not responsive.

As PF and VF may run their reset flow simulantanisly, there are several cases
that are handled:
- Prevent freeing VF resources upon FLR, when PF is in its unloading stage.
- Prevent PF getting VF commands before it has finished initializing its resources.
- Upon VF startup, check that comm-channel is online before sending
  commands to the PF and getting timed-out.

Signed-off-by: Yishai Hadas 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller

net/mlx4_core: Manage interface state for Reset flow cases

2015-01-25T22:43:14+00:00

We need to manage interface state to sync between reset flow and some other
relative cases such as remove_one. This has to be done to prevent certain
races. For example in case software stack is down as a result of unload call,
the remove_one should skip the unload phase.

Implement the remove_one case, handling AER and other cases comes next.

The interface can be up/down, upon remove_one, the state will include an extra
bit indicating that the device is cleaned-up, forcing other tasks to finish
before the final cleanup.

Signed-off-by: Yishai Hadas 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller