Pull mfd updates from Lee Jones:

 - Fix race in device_node_get_regmap() using more extensive locking

 - Remove unused platform driver support for syscon

 - Allow syscon nodes to be registered without a "syscon" compatible
   string

 - Make `platform_data` pointer const in struct mfd_cell

 - Revert support for multiple AXP PMICs to avoid regressions

 - Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
   operation

 - Store the result from fault_log() for use by other sub-components

 - Fix an invalid regmap-config max_register value

 - Add another Gemini Lake ISA bridge PCI device ID

 - Use devm_register_power_off_handler() to simplify code

 - Add support for QNAP microcontroller units, including LEDs, input,
   and hwmon

 - Use MFD_CELL macros and remove unused code

 - Add support for AAEON UP board FPGA

 - Remove unused includes

 - Fix various typos and compatibility issues in multiple bindings

 - Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424

 - Convert several bindings to YAML schema

 - Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
   directly

 - Fix rohm,bd71815 bindings by correcting resistor values and typos

 - Documentation improvements:
    - Add documentation for LED1202 and qnap-mcu-hwmon
    - Adjust the file entry for the qnap-mcu header in MAINTAINERS

* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
  MAINTAINERS: Adjust the file entry for the qnap-mcu header
  dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
  dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
  Revert "mfd: axp20x: Allow multiple regulators"
  dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
  mfd: syscon: Allow syscon nodes without a "syscon" compatible
  mfd: syscon: Remove the platform driver support
  mfd: syscon: Fix race in device_node_get_regmap()
  dt-bindings: mfd: atmel: Convert to YAML schema
  dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
  dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
  mfd: tps65219: Remove unused macros & add regmap.h
  mfd: tps65219: Use MFD_CELL macros
  leds: Add LED1202 I2C driver
  dt-bindings: leds: Add LED1202 LED Controller
  Documentation:leds: Add leds-st1202.rst
  mfd: Add support for AAEON UP board FPGA
  mfd: da9052: Store result from fault_log
  mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
  mfd: cs42l43: Use devres for remove as well
  ...

These macros are not used by the driver, and the structs are accounted
for with the addition of the linux/regmap.h file.

Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-3-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>

The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.

This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.

This commit adds support for UP and UP Squared boards.

Based on the work done by Gary Wang <garywang@aaeon.com.tw>.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>

Other sub-components (da9052-wdt) could use the result to determine
reboot cause. Expose the result by make it part of the da9052 structure.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-1-95a5756e9ac8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.

This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.

Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.

So on shutdown the MCU needs to be turned off separately before the
main PMIC.

The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.

The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>

The content of the platform_data of a struct mfd_cell is simply passed on
to the platform_device_add_data() call in mfd_add_device() .

platform_device_add_data() already handles the data behind that pointer
as const and also uses kmemdup to create a copy of the data before
handing that copy over to the newly created platform-device,
so there is no reason to not extend this to struct mfd_cell, as the old
copy in the mfd_cell will be stale anyway.

This allows to pass structs gathered from of_device_get_match_data()
as platform-data to sub-devices - which is retrieved as const already.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>

Pull watchdog updates from Wim Van Sebroeck:

 - Add support for exynosautov920 SoC

 - Add support for Airoha EN7851 watchdog

 - Add support for MT6735 TOPRGU/WDT

 - Delete the cpu5wdt driver

 - Always print when registering watchdog fails

 - Several other small fixes and improvements

* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
  watchdog: rti: of: honor timeout-sec property
  watchdog: s3c2410_wdt: add support for exynosautov920 SoC
  dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
  watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
  watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
  dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
  dt-bindings: watchdog: Document Qualcomm QCS8300
  docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
  Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
  watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
  watchdog: Switch back to struct platform_driver::remove()
  watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
  watchdog: da9063: Remove __maybe_unused notations
  watchdog: da9063: Do not use a global variable
  watchdog: Delete the cpu5wdt driver
  watchdog: Add support for Airoha EN7851 watchdog
  dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
  watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
  watchdog: rza_wdt: don't print out if registering watchdog fails
  watchdog: rti_wdt: don't print out if registering watchdog fails
  ...

Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Amlogic A4 and A5 RTC
   - Marvell 88PM886 PMIC RTC
   - Renesas RTCA-3 for Renesas RZ/G3S

  Driver updates:
   - ab-eoz9: fix temperature and alarm support
   - cmos: improve locking behaviour
   - isl12022: add alarm support
   - m48t59: improve epoch handling
   - mt6359: add range
   - rzn1: fix BCD conversions and simplify driver"

* tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits)
  rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
  rtc: rzn1: reduce register access
  rtc: rzn1: drop superfluous wday calculation
  m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
  rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
  rtc: m48t59: Use platform_data struct for year offset value
  rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
  rtc: rv3028: fix RV3028_TS_COUNT type
  rtc: rzn1: update Michel's email
  rtc: rzn1: fix BCD to rtc_time conversion errors
  rtc: amlogic-a4: fix compile error
  rtc: amlogic-a4: drop error messages
  MAINTAINERS: Add an entry for Amlogic RTC driver
  rtc: support for the Amlogic on-chip RTC
  dt-bindings: rtc: Add Amlogic A4 and A5 RTC
  rtc: add driver for Marvell 88PM886 PMIC RTC
  rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
  rtc: pcf8563: Switch to regmap
  rtc: pcf8563: Sort headers alphabetically
  rtc: abx80x: Fix WDT bit position of the status register
  ...

Pull MFD updates from Lee Jones:

 - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
   tps65010, have undergone minor code improvements to enhance
   consistency and fix race conditions.

 - The syscon driver now utilizes the regmap max_register_is_0
   capability for consistent register map configuration across syscons
   of all sizes.

 - New device support has been added for QCS8300, qcs615, SA8255p, and
   samsung,s2dos05, expanding the range of compatible hardware.

 - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
   and avoids loading the charger with UCSI, streamlining functionality.

 - The bd96801 driver now utilizes the more modern maple tree register
   cache, improving performance.

 - The da9052-spi driver has undergone a fix to change the read-mask to
   write-mask, preventing potential issues.

 - Unused declarations in max77693 have been removed, and support for
   samsung,s2dos05 has been added, enhancing code clarity and device
   compatibility.

 - Error handling in cs42l43 has been fixed to avoid unbalanced
   regulator put and ensure proper synchronization during driver
   removal.

 - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
   MODULE_ALIAS(), improving code consistency.

 - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
   and reorganized for better clarity and maintainability.

 - The intel_soc_pmic_bxtwc driver has undergone significant
   improvements, including the use of IRQ domains for various devices,
   fixing IRQ domain names duplication, and code refactoring for better
   consistency and maintainability.

 - The ipaq-micro driver has received a fix for a missing break
   statement in the default case, enhancing code robustness.

 - Support for the AXP323 PMIC has been added to the axp20x driver,
   along with ensuring a clear relationship between IDs and model names,
   and allowing multiple regulators, broadening hardware compatibility.

 - The cs42l43 driver now disables IRQs during suspend for improved
   power management.

 - The adp5585 driver has reduced its dependencies by dropping the
   obsolete dependency on COMPILE_TEST.

 - Initial support for the MT6328 PMIC has been added to the mt6397
   driver, expanding the range of supported hardware.

 - The rtc-bd70528 driver has been simplified by dropping the IC name
   from IRQ, improving code readability.

 - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
   updated to enhance clarity and incorporate new features.

 - The rt5033 driver has received a fix for a missing
   regmap_del_irq_chip() in the error handling path.

 - New device support has been added for MSM8917, and the
   intel_soc_pmic_crc driver now supports non-ACPI instantiated
   i2c_client.

 - The 88pm886 driver has added support for the RTC cell, and the tqmx86
   driver has improved its GPIO IRQ setup and added I2C IRQ support,
   increasing functionality.

 - The sprd,sc2731 DT schema has been updated and converted to YAML
   format for better readability and maintainability.

* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
  dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
  dt-bindings: mfd: sprd,sc2731: Convert to YAML
  mfd: tqmx86: Add I2C IRQ support
  mfd: tqmx86: Make IRQ setup errors non-fatal
  mfd: tqmx86: Refactor GPIO IRQ setup
  mfd: tqmx86: Improve gpio_irq module parameter description
  mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
  mfd: 88pm886: Add the RTC cell
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
  mfd: intel_soc_pmic_*: Consistently use filename as driver name
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
  mfd: rt5033: Fix missing regmap_del_irq_chip()
  mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
  dt-bindings: mfd: aspeed: Support for AST2700
  mfd: Switch back to struct platform_driver::remove()
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
  mfd: rtc: bd7xxxx Drop IC name from IRQ
  mfd: mt6397: Add initial support for MT6328
  mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
  ...

Pull gpio updates from Bartosz Golaszewski:
 "Three new drivers, support for some new models in existing ones and
  lots of various tweaks and improvements across the board (switching to
  using recommended APIs, code shrink and simplification, etc.).

  Also a new feature in the character device uAPI where we now notify
  the user-space about changes triggered by in-kernel users as well, not
  only when they were done by other user-space agents.

  Summary:

  GPIOLIB core:
   - use the new mem_is_zero() instead of memchr_inv(s, 0, n)
   - don't store debounce period twice needlessly
   - clean-up debugfs handling
   - remove leftover comments referring to no longer used spinlocks
   - unduplicate some operations like SRCU locks and initializing GPIO
     descriptors
   - constify the sysfs class struct
   - use lock guards in GPIO sysfs code
   - update GPIO uAPI internal flags all at once atomically for
     consistency with other places
   - modify the behavior of the sysfs interface by no longer exporting
     lines that are named inside the driver code or board files with the
     sysfs links bearing the line names as this has for many years been
     largely unused due to the prevalence of DT, ACPI and firmware nodes
     over board files and made the API inconsistent
   - for GPIO interrupt providers: free irqs that are still requested by
     users when removing the chip

  GPIO uAPI:
   - notify user-space about changes to GPIO lines' state (requested,
     released, reconfigured) triggered from the kernel as well (until
     now we'd only do this for changes triggered from user-space)
   - to that end: modify the internal workings of the notification
     mechanism by switching to an atomic notifier which allows us to
     send events from atomic context
   - also to that end store the debounce period in the GPIO descriptor
     struct and not in the character device context struct
   - while at it, also cover the corner-case of users introducing
     changes over sysfs while others watch them via the character device
   - don't report GPIO lines requested as interrupts as "used" to
     user-space as it can still request them as GPIOs

  New drivers:
   - GPIO part of the MFD Congatec Board Controller
   - PolarFire GPIO controller
   - GPIOs on FTDI FT2232H

  Driver improvements:
   - use generic device property accessors instead of OF-specific ones
     across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci,
     ts4900, xilinx, mvebu)
   - use devres helpers to simplify error paths and either shrink or
     entirely remove the driver's remove() callback (grgpio, amdpt,
     menz127, max730x, ftgpio010, 74x164, ljca)
   - use helper variables to store the address of pdev->dev and avoid
     some line-breaks
   - use device_for_each_child_node_scoped() to avoid having to put the
     fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
   - use a scoped bitmap to simplify the code and drop goto labels in
     gpio-aggregator
   - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby,
     xilinx)
   - add support for new models to gpio-aspeed, gpio-rockchip and
     gpio-dwapb
   - clean-up ACPI handling and some other bits in gpio-xgene-sb
   - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
   - allow to build davinci and mvebu drivers with COMPILE_TEST=y
   - remove dead code in gpio-mb86s7x
   - switch back to using platform_driver::remove() (after the
     conversion to remove_new()) across the GPIO drivers
   - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop
     this deprecated symbol
   - convert the gpio-altera driver to no longer pull in the deprecated
     legacy-of-mm-gpiochip.h header
   - use of_property_present() instead of of_property_read_bool() in
     gpiolib-of and gpio-rockchip
   - allow to build the tegra186 driver on Tegra234 platforms in Kconfig

  Late fixes:
   - add a missing return value check after devm_kasprintf() to
     gpio-grgpio

  DT bindings:
   - document the ngpios property of gpio-mmio
   - add support for a new aspeed model
   - fix the example for st,nomadik-gpio

  Other:
   - kernel doc and comments tweaks
   - fix typos in TODO
   - reorder headers alphabetically in some drivers
   - fix incorrect format specifiers in gpio tools"

* tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits)
  gpio: tegra186: Allow to enable driver on Tegra234
  gpio: grgpio: Add NULL check in grgpio_probe
  tools: gpio: Fix several incorrect format specifiers
  gpio: mpfs: add CoreGPIO support
  gpio: rockchip: support new version GPIO
  gpio: rockchip: change the GPIO version judgment logic
  gpio: rockchip: explan the format of the GPIO version ID
  gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)
  MAINTAINERS: add gpio driver to PolarFire entry
  gpio: Get rid of GPIOF_ACTIVE_LOW
  USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW
  pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW
  leds: gpio: Avoid using GPIOF_ACTIVE_LOW
  Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW
  Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW
  gpio: Use of_property_present() for non-boolean properties
  gpio: mpfs: add polarfire soc gpio support
  gpio: altera: Drop legacy-of-mm-gpiochip.h header
  gpio: pcie-idio-24: Replace deprecated PCI functions
  gpio: pci-idio-16: Replace deprecated PCI functions
  ...