Pull ARM SoC driver updates from Arnd Bergmann:
 "There are a couple of subsystems maintained by other people that merge
  their drivers through the SoC tree, those changes include:

   - The SCMI firmware framework gains support for sensor notifications
     and for controlling voltage domains.

   - A large update for the Tegra memory controller driver, integrating
     it better with the interconnect framework

   - The memory controller subsystem gains support for Mediatek MT8192

   - The reset controller framework gains support for sharing pulsed
     resets

  For Soc specific drivers in drivers/soc, the main changes are

   - The Allwinner/sunxi MBUS gets a rework for the way it handles
     dma_map_ops and offsets between physical and dma address spaces.

   - An errata fix plus some cleanups for Freescale Layerscape SoCs

   - A cleanup for renesas drivers regarding MMIO accesses.

   - New SoC specific drivers for Mediatek MT8192 and MT8183 power
     domains

   - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
     identification.

   - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
     SDX55.

   - A rework of the TI AM33xx 'genpd' power domain support to use
     information from DT instead of platform data

   - Support for TI AM64x SoCs

   - Allow building some Amlogic drivers as modules instead of built-in

  Finally, there are numerous cleanups and smaller bug fixes for
  Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
  Renesas, and Xilinx SoCs"

* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
  soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message
  clk: samsung: mark PM functions as __maybe_unused
  soc: samsung: exynos-chipid: initialize later - with arch_initcall
  soc: samsung: exynos-chipid: order list of SoCs by name
  memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
  memory: ti-emif-sram: only build for ARMv7
  memory: tegra30: Support interconnect framework
  memory: tegra20: Support hardware versioning and clean up OPP table initialization
  dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
  soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
  reset-controller: ti: force the write operation when assert or deassert
  ...

Pull MFD updates from Lee Jones:
 "New Drivers
   - Add support for Intel's Platform Monitoring Technology (PMT)

  New Device Support:
   - Add support for PM660/PM660L to QCom SPMI PMIC
   - Add support for lots of new devices to Kontron Core

  New Functionality:
   - Provide syscon_regmap_lookup_by_phandle_optional() to SysCon API

  Fix-ups:
   - Constify; da9xxx-core; intel_*, tps65xxx, wm8xxx-core, lp8788,
     stmpe, sun4i-gpadc, 88pm800, hi655x-pmic, ioc3, etc
   - Remove superfluous code; madera, tps65910
   - Use raw APIs (rid abstractions); tps65911-comparator, tps65910
   - Whitespace/formatting fix-ups; tps65910
   - Device Tree changes/updates; bd71837-pmic, syscon
   - Use helpers/APIs (no hand rolling); altera-sysmgr
   - Mark of_match tables as __maybe_unused; twl6030-irq
   - Fix spelling; si476x-core

  Bug Fixes:
   - Reset on resume to ensure known state; madera-core
   - Correct ordering issues; madera-core, tps65910, kempld-core
   - Remove erroneous passing of of_compatible strings; at91-usart
   - Fix potential I2C adaptor leak; htc-i2cpld
   - Correct errorneous defines; rt5033-private
   - Resolve Kconfig issues; MFD_SL28CPLD, MFD_OMAP_USB_HOST
   - Fix dev_err_probe() handling; stmfx
   - Repair interrupt regression; motorola-cpcap
   - Allow ACPI matching of DT tables; bcm590xx, da9xx, ene-kb3930,
     fsl-imx25-tsadc, max77650, mt6397-core, rt5033, stmfx, max77686,
     sun4i-gpadc, wm8994-core, axp20x-i2c"

[ The PMT updates already came in through the x86 platform tree ]

* tag 'mfd-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
  mfd: kempld-core: Add support for additional devices
  mfd: si476x-core.h: Fix "regulator" spelling in comment
  mfd: twl6030: Mark of_device_id table as maybe unused
  mfd: axp20x: Skip of_device_id table when !CONFIG_OF
  mfd: wm8994: Drop of_match_ptr from of_device_id table
  mfd: sun4i: Drop of_match_ptr from of_device_id table
  mfd: max77686: Drop of_match_ptr from of_device_id table
  mfd: stmfx: Drop of_match_ptr from of_device_id table
  mfd: rt5033: Drop of_match_ptr from of_device_id table
  mfd: mt6397: Drop of_match_ptr from of_device_id table
  mfd: max77650: Drop of_match_ptr from of_device_id table
  mfd: fsl-imx25: Drop of_match_ptr from of_device_id table
  mfd: ene-kb3930: Drop of_match_ptr from of_device_id table
  mfd: da9150: Drop of_match_ptr from of_device_id table
  mfd: da9063: Drop of_match_ptr from of_device_id table
  mfd: da9062: Drop of_match_ptr from of_device_id table
  mfd: da9055: Drop of_match_ptr from of_device_id table
  mfd: bcm590xx: Drop of_match_ptr from of_device_id table
  mfd: omap-usb: Depend on COMMON_CLK to fix compile tests
  mfd: kempld-core: Check for DMI definition before ACPI
  ...

arm64: soc: ZynqMP SoC changes for v5.11 v2

- Small alignments in Xilinx Firmware driver
- Exposing syscon interface for VCU driver

* tag 'zynqmp-soc-for-v5.11-v2' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message

Link: https://lore.kernel.org/r/71d38756-4456-29fc-26a3-341e1d09aafe@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The H.264/H.265 Video Codec Unit v1.2 documentation describes this
register as follows:

	Number of encoders core used for the provided configuration

This is required for configuring the VCU encoder buffer.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://lore.kernel.org/r/20201109134818.4159342-5-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Switch the "logicoreip" registers to the new xlnx,vcu-settings binding
to be able to read the settings if the settings are specified in a
separate device tree node that is shared with other drivers.

If the driver is not able to find a node with the new binding, fall back
to check for the logicore register bank to be backwards compatible.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://lore.kernel.org/r/20201109134818.4159342-4-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Set max_busy_timeouts for variants known to support the TOPxx bits in
the SD_OPTION register. The timeout mechanism was running in the
background but not yet properly handled in the driver. So, let the MMC
core know when to not use R1B to avoid unhandled timeouts.

My datasheets for older variants (tmio_mmc.c) suggest that they support
it, too. However, actual bit descriptions are lacking, so I chose an
opt-in approach.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201125213001.15003-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

"regualtor" -> "regulator"

Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Fix regulators on rt5033 by converting some values to bitmasks which were
errorneously not defined as such in the header file.

Cc: Beomho Seo <beomho.seo@samsung.com>
Fixes: 0b271258544b ("mfd: rt5033: Add Richtek RT5033 driver core.")
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

An errata exists for cs47l15 where the reset must be handled
differently and removed before DCVDD is applied. A soft reset is used
for situations where a reset is required to reset state. This does
however, make this part unsuitable for DCVDD supplies with a rise time
greater than 2mS.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Client pointers in tps65910 data are not used in the drivers.
Remove those fields.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Lee Jones <lee.jones@linaro.org>