Pull chrome platform updates from Benson Leung:

 - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling.

 - Also, maintainership changes. Olofj out, Enric balletbo in.

* tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  MAINTAINERS: platform/chrome: Add Enric as a maintainer
  MAINTAINERS: platform/chrome: remove myself as maintainer
  platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
  platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes

Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...

Pull power supply and reset updates from Sebastian Reichel:

 - New core support:
    - battery internal resistance
    - battery OCV capacity lookup table
    - support for custom sysfs attributes

 - Convert all drivers to use power-supply core support for custom sysfs
   attributes

 - bq24190-charger: bq24196 support

 - axp20x-charger: AXP813 support

 - sc27xx-battery: new fuel gauge driver

 - gpio-poweroff: support for specific active and inactive delays

 - Misc fixes

* tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (53 commits)
  power: supply: bq25890: fix BAT_COMP field definition
  power: supply: gpio-charger: Do not use deprecated POWER_SUPPLY_TYPE_USB_*
  power: supply: ds2781: switch to devm_power_supply_register
  power: supply: ds2780: switch to devm_power_supply_register
  power: supply: ds2781: fix race-condition in bin attribute registration
  power: supply: ds2780: fix race-condition in bin attribute registration
  power: supply: pcf50633: fix race-condition in sysfs registration
  power: supply: charger-manager: fix race-condition in sysfs registration
  power: supply: charger-manager: simplify generation of sysfs attribute group name
  power: supply: bq24257: fix race-condition in sysfs registration
  power: supply: bq24190_charger: fix race-condition in sysfs registration
  power: supply: lp8788: fix race-condition in sysfs registration
  power: supply: ds2781: fix race-condition in sysfs registration
  power: supply: ds2780: fix race-condition in sysfs registration
  power: supply: bq2415x: fix race-condition in sysfs registration
  power: supply: core: add support for custom sysfs attributes
  power: supply: sc27xx: Save last battery capacity
  power: reset: at91-poweroff: move shdwc related data to one structure
  power: supply: sc27xx: Add suspend/resume interfaces
  power: supply: sc27xx: Add fuel gauge low voltage alarm
  ...

Pull MMC updates from Ulf Hansson:
 "This time, this pull request contains changes crossing subsystems and
  archs/platforms, which is mainly because of a bigger modernization of
  moving from legacy GPIO to GPIO descriptors for MMC (by Linus
  Walleij).

  Additionally, once again, I am funneling changes to
  drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
  mostly due to that we lack a maintainer for these.

  Summary:

  MMC core:
   - Cleanup BKOPS support
   - Introduce MMC_CAP_SYNC_RUNTIME_PM
   - slot-gpio: Delete legacy slot GPIO handling

  MMC host:
   - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
   - bcm2835: Several improvements to better recover from errors
   - jz4740: Rework and fixup pre|post_req support
   - mediatek: Add support for SDIO IRQs
   - meson-gx: Improve clock phase management
   - meson-gx: Stop descriptor on errors
   - mmci: Complete the sbc error path by sending a stop command
   - renesas_sdhi/tmio: Fixup reset/resume operations
   - renesas_sdhi: Add support for r8a774c0 and R7S9210
   - renesas_sdhi: Whitelist R8A77990 SDHI
   - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
   - rtsx_usb_sdmmc: Re-work card detection/removal support
   - rtsx_usb_sdmmc: Re-work runtime PM support
   - sdhci: Fix timeout loops for some variant drivers
   - sdhci: Improve support for error handling due to failing commands
   - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
   - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
   - sdhci-of-esdhc: Add support for eMMC HS400 mode
   - sdhci-omap: Fixup reset support
   - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
   - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
   - sdhci-msm: Fixup dynamical clock gating issues
   - various: Complete converting all hosts into using slot GPIO descriptors

  Other:
   - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
   - Add new Alcor Micro cardreader PCI driver
   - Support runtime power management for memstick rtsx_usb_ms driver
   - Use USB remote wakeups for card detection for rtsx_usb misc driver"

* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
  mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
  mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
  dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
  mmc: core: Cleanup BKOPS support
  mmc: core: Drop redundant check in mmc_send_hpi_cmd()
  mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
  dt-bindings: sdhci-omap: Add note for cpu_thermal
  mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
  mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
  mmc: sdhci: Add quirk to disable LED control
  mmc: mmci: add variant property to set command stop bit
  misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
  mmc: meson-gx: add signal resampling
  mmc: meson-gx: align default phase on soc vendor tree
  mmc: meson-gx: remove useless lock
  mmc: meson-gx: make sure the descriptor is stopped on errors
  mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
  dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
  dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
  mmc: sdhci-msm: avoid unused function warning
  ...

Enable PCI suspend/resume support on imx6sx SOCs. This is similar to
imx7d with a few differences:

* The PM_Turn_Off bit is exposed through an IOMUX GPR, like all other
pcie control bits on 6sx.
* The pcie_inbound_axi clk needs to be turned off in suspend. On resume
it is restored via resume -> deassert_core_reset -> enable_ref_clk.

Most of the resume logic is shared with the initial reset after probe.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>

The TMIO MMC driver was passing global GPIO numbers around for
card detect. It turns out only one single board in the kernel
was actually making use of this feature so it is pretty easy
to convert the driver to use only GPIO descriptors.

The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is
what they are, and since we can now rely on the descriptors
to have the right polarity, we set the
"override_active_level" to false in mmc_gpiod_request_cd()
and mmc_gpiod_request_ro().

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The current axp20x names the ramping register 'scal' which probably
means scaling. Since the register really has nothing to do with
scaling, but really is the voltage ramp we rename it appropriately.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

AXP813 and AXP803 PMICs can control input current and minimum voltage.

Both of these values are configurable.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.

There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.

The special GPIO enable DT property for the enable GPIO is
nonstandard but this was accomodated in
commit 6a537d48461deacc57c07ed86d9915e5aa4b3539
"gpio: of: Support regulator nonstandard GPIO properties".

Cc: patches@opensource.cirrus.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

cros_ec_get_next_event() is documented to return 0 for success and
negative for errors. It currently returns negative for some errors, and
non-negative (number of bytes received) for success (including some "no
data available" responses as zero). This mostly works out OK, because the
callers were more or less ignoring the documentation, and only treating
positive values as success (and indepdently checking the modification of
'wakeup').

Let's button this up by avoiding pretending to handle event/wakeup
distinctions when no event info was retrieved (i.e., returned 0 bytes).
And fix the documentation of cros_ec_get_host_event() and
cros_ec_get_next_event() to accurately describe their behavior.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>