linux.git/include/linux/mfd, branch v3.19 Linux kernel source tree Merge remote-tracking branch 'regulator/fix/s2mps11' into regulator-linus 2015-01-16T12:05:35+00:00 Mark Brown broonie@kernel.org 2015-01-16T12:05:35+00:00 113620bb89a580d72a1dd78e677c0c8aac45cf0c 






regulator: s2mps11: Fix wrong calculation of register offset
2015-01-08T18:16:58+00:00

Jonghwa Lee
jonghwa3.lee@samsung.com

2015-01-08T02:04:07+00:00

ad26aa6c60974acf3228ed0ade97ba5793093dbe

This patch adds missing registers('BUCK7_SW' & 'LDO29_CTRL'). Since BUCK7 has
1 more register (BUCK7_SW) than others, register offset should
be added one more for which has bigger address than BUCK7 registers.

Fixes: 76b9840b24ae04(regulator: s2mps11: Add support S2MPS13 regulator device)
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>





This patch adds missing registers('BUCK7_SW' & 'LDO29_CTRL'). Since BUCK7 has
1 more register (BUCK7_SW) than others, register offset should
be added one more for which has bigger address than BUCK7 registers.

Fixes: 76b9840b24ae04(regulator: s2mps11: Add support S2MPS13 regulator device)
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>







Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
2014-12-31T00:59:59+00:00

Linus Torvalds
torvalds@linux-foundation.org

2014-12-31T00:59:59+00:00

bac22980b008ed810c56054d7f8bd73c02326b3f

Pull input layer fixes from Dmitry Torokhov:
 "Fixes for v7 protocol for ALPS devices and few other driver fixes.

  Also users can request input events to be stamped with boot time
  timestamps, in addition to real and monotonic timestamps"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: hil_kbd - fix incorrect use of init_completion
  Input: alps - v7: document the v7 touchpad packet protocol
  Input: alps - v7: fix finger counting for > 2 fingers on clickpads
  Input: alps - v7: sometimes a single touch is reported in mt[1]
  Input: alps - v7: ignore new packets
  Input: evdev - add CLOCK_BOOTTIME support
  Input: psmouse - expose drift duration for IBM trackpoints
  Input: stmpe - bias keypad columns properly
  Input: stmpe - enforce device tree only mode
  mfd: stmpe: add pull up/down register offsets for STMPE
  Input: optimize events_per_packet count calculation
  Input: edt-ft5x06 - fixed a macro coding style issue
  Input: gpio_keys - replace timer and workqueue with delayed workqueue
  Input: gpio_keys - allow separating gpio and irq in device tree





Pull input layer fixes from Dmitry Torokhov:
 "Fixes for v7 protocol for ALPS devices and few other driver fixes.

  Also users can request input events to be stamped with boot time
  timestamps, in addition to real and monotonic timestamps"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: hil_kbd - fix incorrect use of init_completion
  Input: alps - v7: document the v7 touchpad packet protocol
  Input: alps - v7: fix finger counting for > 2 fingers on clickpads
  Input: alps - v7: sometimes a single touch is reported in mt[1]
  Input: alps - v7: ignore new packets
  Input: evdev - add CLOCK_BOOTTIME support
  Input: psmouse - expose drift duration for IBM trackpoints
  Input: stmpe - bias keypad columns properly
  Input: stmpe - enforce device tree only mode
  mfd: stmpe: add pull up/down register offsets for STMPE
  Input: optimize events_per_packet count calculation
  Input: edt-ft5x06 - fixed a macro coding style issue
  Input: gpio_keys - replace timer and workqueue with delayed workqueue
  Input: gpio_keys - allow separating gpio and irq in device tree







Input: stmpe - enforce device tree only mode
2014-12-16T05:46:12+00:00

Linus Walleij
linus.walleij@linaro.org

2014-11-04T00:51:26+00:00

a4164863e150c4991d2ac965e3fc52f9d8df3d7e

The STMPE keypad controller is only used with device tree configured
systems, so force the configuration to come from device tree only, and now
actually get the rows and cols from the device tree too.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>





The STMPE keypad controller is only used with device tree configured
systems, so force the configuration to come from device tree only, and now
actually get the rows and cols from the device tree too.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>







mfd: stmpe: add pull up/down register offsets for STMPE
2014-12-16T05:46:11+00:00

Linus Walleij
linus.walleij@linaro.org

2014-11-04T00:48:47+00:00

80e1dd82be59d247e899d8ce29389f84ed828994

This adds the register offsets for pull up/down for the STMPE
1601, 1801 and 24xx expanders. This is used to bias GPIO lines
and keypad lines.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>





This adds the register offsets for pull up/down for the STMPE
1601, 1801 and 24xx expanders. This is used to bias GPIO lines
and keypad lines.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>







Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
2014-12-11T21:20:50+00:00

Linus Torvalds
torvalds@linux-foundation.org

2014-12-11T21:20:50+00:00

bae41e45b7400496b9bf0c70c6004419d9987819

Pull sound updates from Takashi Iwai:
 "This became a fairly large pull request.  In addition to the usual
  driver updates / fixes, there have been a high amount of cleanups in
  ASoC area, as well as control API helpers and kernel documentations
  fixes touching through the whole tree.

  In the driver side, the biggest changes are the support for new Intel
  SoC found on new x86 machines, and the updates of FireWire dice and
  oxfw drivers.

  Some remarkable items are below:

  ALSA core:
   - PCM mmap code cleanup, removal of arch-dependent codes
   - PCM xrun injection support
   - PCM hwptr tracepoint support
   - Refactoring of snd_pcm_action(), simplification of PCM locking
   - Robustified sequecner auto-load functionality
   - New control API helpers and lots of cleanups along with them
   - Lots of kerneldoc fixes and cleanups

  USB-audio:
   - The mixer resume code was largely rewritten, and the devices with
     quirks are resumed properly.
   - New hardware support: Focusrite Scarlett, Digidesign Mbox1,
     Denon/Marantz DACs, Zoom R16/24

  FireWire:
   - DICE driver updates with better duplex and sync support, including
     MIDI support
   - New OXFW driver for Oxford Semiconductor FW970/971 chipset,
     including the previous LaCie Speakers device.  Fullduplex and MIDI
     support included as well as DICE driver.

  HD-audio:
   - Refactoring the driver-caps quirk handling in snd-hda-intel
   - More consistent control names representing the topology better
   - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
     fix, ASUS Z99He laptop EAPD

  ASoC:
   - Conversion of AC'97 drivers to use regmap, bringing us closer to
     the removal of the ASoC level I/O code
   - Clean up a lot of old drivers that were open coding things that
     have subsequently been implemented in the core
   - Some DAPM performance improvements
   - Removal of the now seldom used CODEC mutex
   - Lots of updates for the newer Intel SoC support, including support
     for the DSP and some Cherrytrail and Braswell machine drivers
   - Support for Samsung boards using rt5631 as the CODEC
   - Removal of the obsolete AFEB9260 machine driver
   - Driver support for the TI TS3A227E headset driver used in some
     Chrombeooks

  Others:
   - ASIHPI driver update and cleanups
   - Lots of dev_*() printk conversions
   - Lots of trivial cleanups for the codes spotted by Coccinelle"

* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: pcxhr: NULL dereference on probe failure
  ALSA: lola: NULL dereference on probe failure
  ALSA: hda - Add "eapd" model string for AD1986A codec
  ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
  ALSA: oxfw: Add hwdep interface
  ALSA: oxfw: Add support for capture/playback MIDI messages
  ALSA: oxfw: add support for capturing PCM samples
  ALSA: oxfw: Add support AMDTP in-stream
  ALSA: oxfw: Add support for Behringer/Mackie devices
  ALSA: oxfw: Change the way to start stream
  ALSA: oxfw: Add proc interface for debugging purpose
  ALSA: oxfw: Change the way to make PCM rules/constraints
  ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
  ALSA: oxfw: Change the way to name card
  ALSA: dice: Add support for MIDI capture/playback
  ALSA: dice: Add support for capturing PCM samples
  ALSA: dice: Support for non SYT-Match sampling clock source mode
  ALSA: dice: Add support for duplex streams with synchronization
  ALSA: dice: Change the way to start stream
  ALSA: jack: Add dummy snd_jack_set_key() definition
  ...





Pull sound updates from Takashi Iwai:
 "This became a fairly large pull request.  In addition to the usual
  driver updates / fixes, there have been a high amount of cleanups in
  ASoC area, as well as control API helpers and kernel documentations
  fixes touching through the whole tree.

  In the driver side, the biggest changes are the support for new Intel
  SoC found on new x86 machines, and the updates of FireWire dice and
  oxfw drivers.

  Some remarkable items are below:

  ALSA core:
   - PCM mmap code cleanup, removal of arch-dependent codes
   - PCM xrun injection support
   - PCM hwptr tracepoint support
   - Refactoring of snd_pcm_action(), simplification of PCM locking
   - Robustified sequecner auto-load functionality
   - New control API helpers and lots of cleanups along with them
   - Lots of kerneldoc fixes and cleanups

  USB-audio:
   - The mixer resume code was largely rewritten, and the devices with
     quirks are resumed properly.
   - New hardware support: Focusrite Scarlett, Digidesign Mbox1,
     Denon/Marantz DACs, Zoom R16/24

  FireWire:
   - DICE driver updates with better duplex and sync support, including
     MIDI support
   - New OXFW driver for Oxford Semiconductor FW970/971 chipset,
     including the previous LaCie Speakers device.  Fullduplex and MIDI
     support included as well as DICE driver.

  HD-audio:
   - Refactoring the driver-caps quirk handling in snd-hda-intel
   - More consistent control names representing the topology better
   - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
     fix, ASUS Z99He laptop EAPD

  ASoC:
   - Conversion of AC'97 drivers to use regmap, bringing us closer to
     the removal of the ASoC level I/O code
   - Clean up a lot of old drivers that were open coding things that
     have subsequently been implemented in the core
   - Some DAPM performance improvements
   - Removal of the now seldom used CODEC mutex
   - Lots of updates for the newer Intel SoC support, including support
     for the DSP and some Cherrytrail and Braswell machine drivers
   - Support for Samsung boards using rt5631 as the CODEC
   - Removal of the obsolete AFEB9260 machine driver
   - Driver support for the TI TS3A227E headset driver used in some
     Chrombeooks

  Others:
   - ASIHPI driver update and cleanups
   - Lots of dev_*() printk conversions
   - Lots of trivial cleanups for the codes spotted by Coccinelle"

* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: pcxhr: NULL dereference on probe failure
  ALSA: lola: NULL dereference on probe failure
  ALSA: hda - Add "eapd" model string for AD1986A codec
  ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
  ALSA: oxfw: Add hwdep interface
  ALSA: oxfw: Add support for capture/playback MIDI messages
  ALSA: oxfw: add support for capturing PCM samples
  ALSA: oxfw: Add support AMDTP in-stream
  ALSA: oxfw: Add support for Behringer/Mackie devices
  ALSA: oxfw: Change the way to start stream
  ALSA: oxfw: Add proc interface for debugging purpose
  ALSA: oxfw: Change the way to make PCM rules/constraints
  ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
  ALSA: oxfw: Change the way to name card
  ALSA: dice: Add support for MIDI capture/playback
  ALSA: dice: Add support for capturing PCM samples
  ALSA: dice: Support for non SYT-Match sampling clock source mode
  ALSA: dice: Add support for duplex streams with synchronization
  ALSA: dice: Change the way to start stream
  ALSA: jack: Add dummy snd_jack_set_key() definition
  ...







Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
2014-12-09T22:38:28+00:00

Linus Torvalds
torvalds@linux-foundation.org

2014-12-09T22:38:28+00:00

6cd94d5e57ab97ddd672b707ab4bb639672c1727

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...





Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...







Merge tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
2014-12-09T04:42:41+00:00

Linus Torvalds
torvalds@linux-foundation.org

2014-12-09T04:42:41+00:00

f94784bdb114439eb3a5e62343826887bbf3f37c

Pull regulator updates from Mark Brown:
 "The main thing this time around is support for suspend mode
  configuration from DT which will enable some very useful power savings
  on systems where we can't rely on the bootloader configuration.  We
  still don't really support dynamic configuration of this at runtime,
  that may come later if there is any demand.

  Summary:
   - Support for specifying the target regulation mode and voltage
     during system suspend via DT, enabling power savings in that mode.
   - Reduce the default verbosity of the logging on boot, improving boot
     times especially for systems with very large numbers of regulators.
   - Lots of cleanups and fixes for Maxim PMIC drivers.
   - New driver for Richtek RT5033"

* tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (62 commits)
  regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing
  regulator: sky81452: Modify Device Tree structure
  regulator: sky81452: Modify Device Tree structure
  dt-bindings: Update documentation for "system-power-controller" and fix misspellings
  of: Rename "poweroff-source" property to "system-power-controller"
  regulator: max77686: Remove support for board files
  regulator: max77802: Remove support for board files
  regulator: max77802: Fill regulator modes translation callback
  regulator: max77802: Document binding for regulator operating modes
  regulator: of: Add support for parsing initial and suspend modes
  regulator: of: Pass the regulator description in the match table
  regulator: of: Add regulator desc param to of_get_regulator_init_data()
  regulator: Add mode mapping function to struct regulator_desc
  regulator: Document binding for initial and suspend modes
  regulator: core: Add PRE_DISABLE notification
  regulator: gpio: fix parsing of gpio list
  regulator: rpm: add support for RPM-controller SMB208
  regulator: da9063: Do not transform local IRQ to virtual
  regulator: sky81452: Modify dependent Kconfig symbol
  regulator: rt5033: Add RT5033 Regulator device driver
  ...





Pull regulator updates from Mark Brown:
 "The main thing this time around is support for suspend mode
  configuration from DT which will enable some very useful power savings
  on systems where we can't rely on the bootloader configuration.  We
  still don't really support dynamic configuration of this at runtime,
  that may come later if there is any demand.

  Summary:
   - Support for specifying the target regulation mode and voltage
     during system suspend via DT, enabling power savings in that mode.
   - Reduce the default verbosity of the logging on boot, improving boot
     times especially for systems with very large numbers of regulators.
   - Lots of cleanups and fixes for Maxim PMIC drivers.
   - New driver for Richtek RT5033"

* tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (62 commits)
  regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing
  regulator: sky81452: Modify Device Tree structure
  regulator: sky81452: Modify Device Tree structure
  dt-bindings: Update documentation for "system-power-controller" and fix misspellings
  of: Rename "poweroff-source" property to "system-power-controller"
  regulator: max77686: Remove support for board files
  regulator: max77802: Remove support for board files
  regulator: max77802: Fill regulator modes translation callback
  regulator: max77802: Document binding for regulator operating modes
  regulator: of: Add support for parsing initial and suspend modes
  regulator: of: Pass the regulator description in the match table
  regulator: of: Add regulator desc param to of_get_regulator_init_data()
  regulator: Add mode mapping function to struct regulator_desc
  regulator: Document binding for initial and suspend modes
  regulator: core: Add PRE_DISABLE notification
  regulator: gpio: fix parsing of gpio list
  regulator: rpm: add support for RPM-controller SMB208
  regulator: da9063: Do not transform local IRQ to virtual
  regulator: sky81452: Modify dependent Kconfig symbol
  regulator: rt5033: Add RT5033 Regulator device driver
  ...







Merge tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
2014-12-09T04:02:54+00:00

Linus Torvalds
torvalds@linux-foundation.org

2014-12-09T04:02:54+00:00

3a7dbed7f23cdde8394e9adf92cc222856e0fc1e

Pull MFD updates from Lee Jones:
 "Changes to the core:
   - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs

  Changes to existing drivers:
   - IRQ additions/fixes; axp20x, da9063-core
   - Code simplification; i2c-dln2
   - Regmap additions/fixes; max77693
   - Error checking/handling improvements; dln2, db8500-prcmu
   - Bug fixes; dln2, wm8350-core
   - DT support/documentation; max77693, max77686, tps65217, twl4030-power,
                               gpio-tc3589x
   - Decouple syscon interface from platform devices
   - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub
   - Regulator fixups; sec-core
   - Power Management additions/fixes; rts5227, tc6393xb
   - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private
   - Clean-up/coding style changes; tps65090
   - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb
   - Add USB-SPI support; dln2
   - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables
                      wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci

  New drivers/supported devices:
   - axp288 PMIC support added to axp20x
   - s2mps13 support added to sec-core
   - New support for Diolan DLN-2
   - New support for atmel-hlcdc"

* tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits)
  mfd: rtsx: Add func to split u32 into register
  mfd: atmel-hlcdc: Add Kconfig option description and name
  mfd: da9063: Get irq base dynamically before registering device
  mfd: max14577: Fix obvious typo in company name in copyright
  mfd: axp20x: Constify axp20x_acpi_match and rid unused warning
  mfd: t7l66xb: prepare/unprepare clocks
  mfd: tc6387xb: prepare/unprepare clocks
  mfd: dln2: add support for USB-SPI module
  mfd: wm5110: Add missing registers for AIF2 channels 3-6
  mfd: tc3589x: get rid of static base
  mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers
  mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable
  mfd: tc6393xb: Prepare/unprepare clocks
  mfd: tps65090: Fix bonkers indenting strategy
  mfd: tc6393xb: Fail ohci suspend if full state restore is required
  mfd: lpc_sch: Don't call mfd_remove_devices()
  mfd: wm8350-core: Fix probable mask then right shift defect
  mfd: ab8500-sysctrl: Drop ab8500_restart
  mfd: db8500-prcmu: Provide sane error path values
  mfd: db8500-prcmu: Check return of devm_ioremap for error
  ...





Pull MFD updates from Lee Jones:
 "Changes to the core:
   - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs

  Changes to existing drivers:
   - IRQ additions/fixes; axp20x, da9063-core
   - Code simplification; i2c-dln2
   - Regmap additions/fixes; max77693
   - Error checking/handling improvements; dln2, db8500-prcmu
   - Bug fixes; dln2, wm8350-core
   - DT support/documentation; max77693, max77686, tps65217, twl4030-power,
                               gpio-tc3589x
   - Decouple syscon interface from platform devices
   - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub
   - Regulator fixups; sec-core
   - Power Management additions/fixes; rts5227, tc6393xb
   - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private
   - Clean-up/coding style changes; tps65090
   - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb
   - Add USB-SPI support; dln2
   - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables
                      wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci

  New drivers/supported devices:
   - axp288 PMIC support added to axp20x
   - s2mps13 support added to sec-core
   - New support for Diolan DLN-2
   - New support for atmel-hlcdc"

* tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits)
  mfd: rtsx: Add func to split u32 into register
  mfd: atmel-hlcdc: Add Kconfig option description and name
  mfd: da9063: Get irq base dynamically before registering device
  mfd: max14577: Fix obvious typo in company name in copyright
  mfd: axp20x: Constify axp20x_acpi_match and rid unused warning
  mfd: t7l66xb: prepare/unprepare clocks
  mfd: tc6387xb: prepare/unprepare clocks
  mfd: dln2: add support for USB-SPI module
  mfd: wm5110: Add missing registers for AIF2 channels 3-6
  mfd: tc3589x: get rid of static base
  mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers
  mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable
  mfd: tc6393xb: Prepare/unprepare clocks
  mfd: tps65090: Fix bonkers indenting strategy
  mfd: tc6393xb: Fail ohci suspend if full state restore is required
  mfd: lpc_sch: Don't call mfd_remove_devices()
  mfd: wm8350-core: Fix probable mask then right shift defect
  mfd: ab8500-sysctrl: Drop ab8500_restart
  mfd: db8500-prcmu: Provide sane error path values
  mfd: db8500-prcmu: Check return of devm_ioremap for error
  ...







Merge remote-tracking branches 'asoc/topic/codec-mutex', 'asoc/topic/compress' and 'asoc/topic/cq93vc' into asoc-next
2014-12-08T13:11:52+00:00

Mark Brown
broonie@kernel.org

2014-12-08T13:11:52+00:00

cfdf59b4a157b3ffa123073cc9e2a62febdbafbf