linux.git/include/linux/leds.h, branch v3.17-rc2

leds: convert blink timer to workqueue

2014-07-03T19:02:14+00:00

This patch converts the blink timer from led-core to workqueue which is more
suitable for this kind of non-priority operations. Moreover, timer may lead to
errors when a LED setting function use a scheduling function such as pinctrl
which is using mutex.

Signed-off-by: Vincent Donnefort 
Signed-off-by: Bryan Wu

leds: add led-class attribute-group support

2014-06-25T21:55:03+00:00

Allow led-class devices to be created with optional attribute groups.

This is needed in order to allow led drivers to create custom device
attributes in a race-free manner.

Signed-off-by: Johan Hovold 
Signed-off-by: Bryan Wu

leds: add camera LED triggers

2013-04-01T18:04:50+00:00

Some LED devices support flash/torch functionality through the LED subsystem.
This patch enables direct LED trigger controls by the driver.
Flash on/off and torch on/off can be done simply by other driver space.
Two trigger APIs are added, ledtrig_flash_ctrl() and ledtrig_torch_ctrl().

Signed-off-by: Milo(Woogyom) Kim 
Signed-off-by: Bryan Wu

leds: trigger: use inline functions instead of macros

2013-04-01T18:04:50+00:00

Macros are used in case that an inline function doesn't work.
Otherwise, use an empty inline function.

(a) Case of !CONFIG_LEDS_TRIGGERS
Following macros are replaced with inline functions.
  led_trigger_register_simple()
  led_trigger_unregister_simple()
  led_trigger_event()
To make inline types, the structure, 'led_trigger' should be defined.
This structure has no member at all.

(b) Case of !CONFIG_LEDS_TRIGGER_IDE_DISK
ledtrig_ide_activity() macro is replaced with an inline function as well.

(c) DEFINE_LED_TRIGGER() and DEFINE_LED_TRIGGER_GLOBAL()
Struct 'led_trigger' is defined both cases, with CONFIG_LEDS_TRIGGERS and
without CONFIG_LEDS_TRIGGERS.
Those macros are moved out of CONFIG_LED_TRIGGERS because of no-dependency
on CONFIG_LEDS_TRIGGERS.

(d) Fix build errors in mmc-core driver
After replacing macros with inline functions, following build errors occur.
(condition: CONFIG_LEDS_TRIGGERS is not set)

  drivers/mmc/core/core.c: In function 'mmc_request_done':
  drivers/mmc/core/core.c:164:25: error: 'struct mmc_host' has no member named 'led'
  drivers/mmc/core/core.c: In function 'mmc_start_request':
  drivers/mmc/core/core.c:254:24: error: 'struct mmc_host' has no member named 'led'
  make[3]: *** [drivers/mmc/core/core.o] Error 1

The reason of these errors is non-existent member variable, 'led'.
It is only valid when CONFIG_LEDS_TRIGGERS is set.
But now, it can be used without this dependency.
To fix build errors, member 'led' is always used without its config option in
'include/linux/mmc/host.h'.

Signed-off-by: Milo(Woogyom) Kim 
Signed-off-by: Bryan Wu

led: Add dependency on CONFIG_LEDS_TRIGGERS to led_trigger_rename_static()

2012-11-26T22:28:51+00:00

This patch fixes build warnings when CONFIG_LEDS_TRIGGERS is
disabled as below:
include/linux/leds.h:158:18: warning: 'struct led_trigger' declared inside parameter list [enabled by default]
include/linux/leds.h:158:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled
by default]

Signed-off-by: Jingoo Han 
Acked-by: Fabio Baltieri 
Signed-off-by: Bryan Wu

leds: add led_trigger_rename function

2012-11-26T22:28:50+00:00

Implements a "led_trigger_rename" function to rename a trigger with
proper locking.

This assumes that led name was originally allocated in non-constant
storage.

Signed-off-by: Fabio Baltieri 
Cc: Kurt Van Dijck 
Signed-off-by: Bryan Wu

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

2012-10-10T11:14:07+00:00

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits)
  leds: add output driver configuration for pca9633 led driver
  leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()
  leds: Add new LED driver for lm3642 chips
  leds-lp5523: Fix riskiness of the page fault
  leds-lp5523: turn off the LED engines on unloading the driver
  leds-lm3530: Fix smatch warnings
  leds-lm3530: Use devm_regulator_get function
  leds: leds-gpio: adopt pinctrl support
  leds: Add new LED driver for lm355x chips
  leds-lp5523: use the i2c device id rather than fixed name
  leds-lp5523: add new device id for LP55231
  leds-lp5523: support new LP55231 device
  leds: triggers: send uevent when changing triggers
  leds-lp5523: minor code style fixes
  leds-lp5523: change the return type of lp5523_set_mode()
  leds-lp5523: set the brightness to 0 forcely on removing the driver
  leds-lp5523: add channel name in the platform data
  leds: leds-gpio: Use of_get_child_count() helper
  leds: leds-gpio: Use platform_{get,set}_drvdata
  leds: leds-gpio: use of_match_ptr()
  ...

leds: delay led_set_brightness if stopping soft-blink

2012-09-11T10:32:40+00:00

Delay execution of led_set_brightness() if need to stop soft-blink
timer.

This allows led_set_brightness to be called in hard-irq context even if
soft-blink was activated on that LED.

Signed-off-by: Fabio Baltieri 
Cc: Pawel Moll 
Signed-off-by: Bryan Wu

Merge branch 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers

2012-08-13T14:45:48+00:00

From Bryan Wu :

Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
new generic led trigger for CPU not only for ARM but also for others.

For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to
trigger idle start or idle end event.

These patches convert old style LED driver in arch/arm to gpio_led or new led
driver interface. Against 3.5 release and build successfully for all the machines.

Test ledtrig-cpu driver on OMAP4 Panda board.

v9 --> v10
 * fix compiling issue on versatile_defconfig reported by Russell King
 * rebase to 3.5 kernel and move patches to new git tree

v8 --> v9:
 * use mutex to replace rw_sema pointed out by Tim Gardner
 * add a new struct led_trigger_cpu
 * add lock_is_inited to record mutex lock initialization

v6 --> v7:
 * add a patch to unify the led-trigger name
 * fix some typo pointed
 * use BUG_ON to detect CPU numbers during building stage

v5 --> v6:
 * replace  __get_cpu_var() to per_cpu()
 * remove smp_processor_id() which is wrong with for_each_possible_cpu()
 * test on real OMAP4 Panda board
 * add comments about CPU hotplug in the CPU LED trigger driver

v4 --> v5:
 * rebase all the patches on top of latest linux-next
 * replace on_each_cpu() with for_each_possible_cpu()
 * add some description of ledtrig_cpu() API
 * remove old leds code from driver nwflash.c, which should use a new led trigger then
 * this trigger driver can be built as module now

v3 --> v4:
 * fix a typo pointed by Jochen Friedrich
 * fix some building errors
 * add Reviewed-by and Tested-by into patch log

v2 --> v3:
 * almost rewrote the whole ledtrig-cpu driver, which is more simple
 * every CPU will have a per-CPU trigger
 * cpu trigger can be assigned to any leds
 * fix a lockdep issue in led-trigger common code
 * other fix according to review

v1 --> v2:
 * remove select operations in Kconfig of every machines
 * add back supporting of led in core module of mach-integrator
 * solidate name scheme in ledtrig-cpu.c
 * add comments of CPU_LED_* cpu led events
 * fold patches of RealView and Versatile together
 * add machine_is_ check during assabet led driver init
 * add some Acked-by in patch logs
 * remove code for simpad machine in machine-sa11000, since Jochen Friedrich
   introduced gpiolib and gpio-led driver for simpad
 * on Assabet and Netwinder machine, LED operations is reversed like:
   setting bit means turn off leds
   clearing bit means turn on leds
 * add a new function to read CM_CTRL register for led driver

* 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  ARM: use new LEDS CPU trigger stub to replace old one
  ARM: mach-sa1100: retire custom LED code
  ARM: mach-omap1: retire custom LED code
  ARM: mach-pnx4008: remove including old leds event API header file
  ARM: plat-samsung: remove including old leds event API header file
  ARM: mach-pxa: retire custom LED code
  char: nwflash: remove old led event code
  ARM: mach-footbridge: retire custom LED code
  ARM: mach-ebsa110: retire custom LED code
  ARM: mach-clps711x: retire custom LED code of P720T machine
  ARM: mach-integrator: retire custom LED code
  ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions
  ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger
  ARM: mach-shark: retire custom LED code
  ARM: mach-ks8695: remove leds driver, since nobody use it
  ARM: mach-realview and mach-versatile: retire custom LED code
  ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers
  led-triggers: create a trigger for CPU activity

Conflicts:
	arch/arm/mach-clps711x/p720t.c
	arch/arm/mach-sa1100/leds-cerf.c
	arch/arm/mach-sa1100/leds-lart.c

Let's hope this is the last time we pull this and it doesn't cause
more trouble. I have verified that version 10 causes no build
warnings or errors any more, and the patches still look good.

Signed-off-by: Arnd Bergmann

led-triggers: create a trigger for CPU activity

2012-07-31T13:23:31+00:00

Attempting to consolidate the ARM LED code, this removes the
custom RealView LED trigger code to turn LEDs on and off in
response to CPU activity and replace it with a standard trigger.

(bryan.wu@canonical.com:
It introduces several syscore stubs into this trigger.
It also provides ledtrig_cpu trigger event stub in .
Although it was inspired by ARM work, it can be used in other arch.)

Cc: Richard Purdie 
Signed-off-by: Linus Walleij 
Signed-off-by: Bryan Wu 
Reviewed-by: Jamie Iles 
Tested-by: Jochen Friedrich