The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

With no more users of the legacy GPIO line value setters - .set() and
.set_multiple() - we can now remove them from the kernel.

Link: https://lore.kernel.org/r/20250725074651.14002-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

As the first step in removing the fields specific to the gpio-mmio
module from struct gpio_chip, we introduce a new set of generic GPIO
chip interfaces that are meant to replace the existing bgpio_ ones.

The new initialization function - gpio_generic_chip_init() - takes a
configuration structure as argument instead of 9 separate parameters.
This will allow easy extension if needed in the future. We hide the
locking details behind a set of helpers in order to be able to move the
raw spinlock out of struct gpio_chip without the users noticing.

For now, the new APIs just wrap the existing ones. Once all users have
been converted to the new interfaces, we'll pull them into gpio-mmio and
implement them in a backward-compatible way while also moving all fields
specific to the generic GPIO chip into struct gpio_generic_chip.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250702-gpio-mmio-rework-v2-1-6b77aab684d8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Immutable branch between GPIO, MFD and ARM-SoC for v6.17-rc1

Remove struct bgpio_pdata after converting its users to generic device
properties.

With no more users, we can now remove struct bgpio_pdata. Move the
relevant bits from bgpio_parse_fw() into bgpio_pdev_probe() while
maintaining the logical ordering (get flags before calling
bgpio_init()).

Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-6-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This function is not meant to modify the GPIO descriptors in any way so
we can safely constify both arguments.

Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-1-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

When using bgpio_init with a gpiochip acting as a GPO (output only), the
gpiochip ops `direction_input` was set to `bgpio_simple_dir_in` by
default but we have no input ability.

Adding this flag allows to set a valid ops for the `direction_output`
ops without setting a valid ops for `direction_input` by default.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250613-hdp-upstream-v5-1-6fd6f0dc527c@foss.st.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull gpio updates from Bartosz Golaszewski:
 "We have three new drivers, some refactoring in the GPIO core, lots of
  various changes across many drivers, new configfs interface for the
  virtual gpio-aggregator module and DT-bindings updates.

  The treewide conversion of GPIO drivers to using the new value setter
  callbacks is ongoing with another round of GPIO drivers updated. You
  will also see these commits coming in from other subsystems as with
  the relevant changes merged into mainline last cycle, I've started
  converting GPIO providers located elsewhere than drivers/gpio/.

  GPIO core:
   - use more lock guards where applicable
   - refactor GPIO ACPI code and shrink it in the process by 8%
   - move GPIO ACPI quirks into a separate file
   - remove unneeded #ifdef
   - convert GPIO devres helpers to using devm_add_action() where
     applicable which shrinks and simplifies the code
   - refactor GPIO descriptor validation in GPIO consumer interfaces
   - don't allow setting values on input lines in the GPIO core which
     will take off the burden from GPIO drivers of checking this down
     the line
   - provide gpiod_is_equal() as a way of safely comparing two GPIO
     descriptors (the only current user is in regulator core)

  New drivers:
   - add the GPIO module for the max77759 multifunction device
   - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
   - add the GPIO driver for the Spacemit K1 SoC

  Driver improvements:
   - convert more drivers to using the new GPIO line value setter
     callbacks
   - convert more drivers to making the irq_chip immutable as is
     recommended by the interrupt subsystem
   - extend build testing coverage by enabling more modules to be built
     with COMPILE_TEST=y
   - extend the gpio-aggregator module with a configfs interface that
     makes the setup easier for user-space than the existing
     driver-level sysfs attributes and also adds more advanced
     configuration features (such as referring to aggregated lines by
     their original names or modifying their names as exposed by the
     aggregated chip)
   - add a missing mutex_destroy() in gpio-imx-scu
   - add an OF polarity quirk for s5m8767
   - allow building gpio-vf610 as a loadable module
   - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
     interface disabled (another small step towards getting rid of the
     global GPIO numberspace)
   - add support for level-triggered interrupts to gpio-pca953x
   - don't double-check the ngpios property in gpio-ds4520 as GPIO core
     already does it
   - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
     already does it
   - remove unused callbacks from gpio-max3191x

  DT bindings:
   - add device-tree bindings for max77759, spacemit,k1 and blzp1600
     (new drivers added this cycle)
   - document more properties for gpio-vf610 and gpio-tegra186
   - document a new pca95xx variant
   - fix style of examples in several GPIO DT-binding documents

  Misc:
   - TODO list updates"

* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
  gpio: timberdale: select GPIOLIB_IRQCHIP
  gpio: lpc18xx: select GPIOLIB_IRQCHIP
  gpio: grgpio: select GPIOLIB_IRQCHIP
  gpio: bcm-kona: select GPIOLIB_IRQCHIP
  dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
  gpio: davinci: select GPIOLIB_IRQCHIP
  gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
  gpiolib: acpi: Move quirks to a separate file
  gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
  gpiolib: acpi: Handle deferred list via new API
  gpiolib: acpi: Make sure we fill struct acpi_gpio_info
  gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
  gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
  gpiolib: remove unneeded #ifdef
  gpio: mpc8xxx: select GPIOLIB_IRQCHIP
  gpio: pxa: select GPIOLIB_IRQCHIP
  gpio: pxa: Make irq_chip immutable
  gpio: timberdale: Make irq_chip immutable
  gpio: xgene-sb: Make irq_chip immutable
  gpio: davinci: Make irq_chip immutable
  ...

Pull irq cleanups from Thomas Gleixner:
 "A set of cleanups for the generic interrupt subsystem:

   - Consolidate on one set of functions for the interrupt domain code
     to get rid of pointlessly duplicated code with only marginal
     different semantics.

   - Update the documentation accordingly and consolidate the coding
     style of the irqdomain header"

* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  irqdomain: Consolidate coding style
  irqdomain: Fix kernel-doc and add it to Documentation
  Documentation: irqdomain: Update it
  Documentation: irq-domain.rst: Simple improvements
  Documentation: irq/concepts: Minor improvements
  Documentation: irq/concepts: Add commas and reflow
  irqdomain: Improve kernel-docs of functions
  irqdomain: Make struct irq_domain_info variables const
  irqdomain: Use irq_domain_instantiate()'s return value as initializers
  irqdomain: Drop irq_linear_revmap()
  pinctrl: keembay: Switch to irq_find_mapping()
  irqchip/armada-370-xp: Switch to irq_find_mapping()
  gpu: ipu-v3: Switch to irq_find_mapping()
  gpio: idt3243x: Switch to irq_find_mapping()
  sh: Switch to irq_find_mapping()
  powerpc: Switch to irq_find_mapping()
  irqdomain: Drop irq_domain_add_*() functions
  powerpc: Switch irq_domain_add_nomap() to use fwnode
  thermal: Switch to irq_domain_create_linear()
  soc: Switch to irq_domain_create_*()
  ...

intel-gpio for v6.16-1

* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code

The following is an automated git shortlog grouped by driver:

gpiolib:
 -  acpi: Update file references in the Documentation and MAINTAINERS
 -  acpi: Move quirks to a separate file
 -  acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
 -  acpi: Handle deferred list via new API
 -  acpi: Make sure we fill struct acpi_gpio_info
 -  acpi: Switch to use enum in acpi_gpio_in_ignore_list()
 -  acpi: Use temporary variable for struct acpi_gpio_info
 -  acpi: Deduplicate some code in __acpi_find_gpio()
 -  acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
 -  acpi: Rename par to params for better readability
 -  acpi: Reduce memory footprint for struct acpi_gpio_params
 -  acpi: Remove index parameter from acpi_gpio_property_lookup()
 -  acpi: Improve struct acpi_gpio_info memory footprint