linux.git/include/linux/gpio/driver.h, branch v5.8-rc2 Linux kernel source tree gpiolib: Introduce gpiochip_irqchip_add_domain() 2020-06-03T08:48:37+00:00 Michael Walle michael@walle.cc 2020-05-28T14:58:43+00:00 6a45b0e2589fafd7fc501a5fbd0ab56689a08124 The function connects an IRQ domain to a gpiochip and reuses gpiochip_to_irq() which is provided by gpiolib. gpiochip_irqchip_* and regmap_irq partially provide the same functionality. This function will help to connect just the minimal functionality of the gpiochip_irqchip which is needed to work together with regmap-irq. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200528145845.31436-2-michael@walle.cc Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The function connects an IRQ domain to a gpiochip and reuses
gpiochip_to_irq() which is provided by gpiolib.

gpiochip_irqchip_* and regmap_irq partially provide the same
functionality. This function will help to connect just the
minimal functionality of the gpiochip_irqchip which is needed to
work together with regmap-irq.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200528145845.31436-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: gpiolib: Allow GPIO IRQs to lazy disable 2020-05-28T21:32:38+00:00 Maulik Shah mkshah@codeaurora.org 2020-05-23T17:11:10+00:00 a8173820f441ab3e2a45c4bb66b70da9a57a349e With 'commit 461c1a7d4733 ("gpiolib: override irq_enable/disable")' gpiolib overrides irqchip's irq_enable and irq_disable callbacks. If irq_disable callback is implemented then genirq takes unlazy path to disable irq. Underlying irqchip may not want to implement irq_disable callback to lazy disable irq when client drivers invokes disable_irq(). By overriding irq_disable callback, gpiolib ends up always unlazy disabling IRQ. Allow gpiolib to lazy disable IRQs by overriding irq_disable callback only if irqchip implemented irq_disable. In cases where irq_disable is not implemented irq_mask is overridden. Similarly override irq_enable callback only if irqchip implemented irq_enable otherwise irq_unmask is overridden. Fixes: 461c1a7d4733 ("gpiolib: override irq_enable/disable") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/1590253873-11556-2-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
With 'commit 461c1a7d4733 ("gpiolib: override irq_enable/disable")' gpiolib
overrides irqchip's irq_enable and irq_disable callbacks. If irq_disable
callback is implemented then genirq takes unlazy path to disable irq.

Underlying irqchip may not want to implement irq_disable callback to lazy
disable irq when client drivers invokes disable_irq(). By overriding
irq_disable callback, gpiolib ends up always unlazy disabling IRQ.

Allow gpiolib to lazy disable IRQs by overriding irq_disable callback only
if irqchip implemented irq_disable. In cases where irq_disable is not
implemented irq_mask is overridden. Similarly override irq_enable callback
only if irqchip implemented irq_enable otherwise irq_unmask is overridden.

Fixes: 461c1a7d4733 ("gpiolib: override irq_enable/disable")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/1590253873-11556-2-git-send-email-mkshah@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: Make "offset" and "unsigned int", not just "unsigned" 2020-04-29T12:18:58+00:00 Douglas Anderson dianders@chromium.org 2020-04-29T00:23:28+00:00 8d0910121b070b4edf4239d91cf9a4523b33ca0c When I copied the function prototypes from the GPIO header file into my own driver, checkpatch yelled at me saying that I shouldn't use use "unsigned" but instead should say "unsigned int". Let's make the header file use "unsigned int" so others who copy like I did won't get yelled at. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200428172322.2.Iacb3c8152c3cf9015a91308678155a578b0cc050@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When I copied the function prototypes from the GPIO header file into
my own driver, checkpatch yelled at me saying that I shouldn't use use
"unsigned" but instead should say "unsigned int".  Let's make the
header file use "unsigned int" so others who copy like I did won't get
yelled at.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200428172322.2.Iacb3c8152c3cf9015a91308678155a578b0cc050@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: Document proper return value for gpio drivers 2020-04-29T12:15:25+00:00 Douglas Anderson dianders@chromium.org 2020-04-29T00:23:27+00:00 36b5215436ad115551e12478ceb3be4a2279e415 The legacy defines GPIOF_DIR_XXX are only for consumers. Document the proper ones. Also: don't use "_XXX" since that's harder to find with "git grep". Just list both of the values. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200428172322.1.I396f351e364f3c09df7c7606e79abefb8682c092@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The legacy defines GPIOF_DIR_XXX are only for consumers. Document the
proper ones.  Also: don't use "_XXX" since that's harder to find with
"git grep".  Just list both of the values.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200428172322.1.I396f351e364f3c09df7c7606e79abefb8682c092@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: Rename variable in core APIs 2020-03-31T19:29:04+00:00 Linus Walleij linus.walleij@linaro.org 2020-03-29T14:04:05+00:00 a0b66a73785ccc8fedbff00383ffe814df9f63c7 There is struct gpio *gc, *chip and *gpiochip, and yes I am responsible for some of the inconsistencies. I want this to be just gc everywhere for minimizing cognitive resistance when reading the code: more compact function signatures and less clutter. Purely syntactic changes intended. No semantic effects. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200329140405.52276-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
There is struct gpio *gc, *chip and *gpiochip, and yes
I am responsible for some of the inconsistencies. I want
this to be just gc everywhere for minimizing cognitive
resistance when reading the code: more compact function
signatures and less clutter.

Purely syntactic changes intended. No semantic effects.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200329140405.52276-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: mmio: introduce BGPIOF_NO_SET_ON_INPUT 2020-03-25T08:50:45+00:00 Chuanhong Guo gch981213@gmail.com 2020-03-15T12:13:37+00:00 d19d2de61fb131abcd29f7c61d3f168f687bfd6e Some gpio controllers ignores pin value writing when that pin is configured as input mode. As a result, bgpio_dir_out should set pin to output before configuring pin values or gpio pin values can't be set up properly. Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first and bgpio_dir_out_dir_first, and assign direction_output according to a new flag: BGPIOF_NO_SET_ON_INPUT. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
Some gpio controllers ignores pin value writing when that pin is
configured as input mode. As a result, bgpio_dir_out should set
pin to output before configuring pin values or gpio pin values
can't be set up properly.
Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first
and bgpio_dir_out_dir_first, and assign direction_output according
to a new flag: BGPIOF_NO_SET_ON_INPUT.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2020-01-29T17:51:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-29T17:51:36+00:00 6ba3d7066c71d2103da255df19eb613d299bab15 Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ... 
Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes, nothing too exciting about
  this.

  Some changes hit arch/sh and arch/arm but are well isolated and
  acknowledged by the respective arch maintainers.

  Core changes:

   - Dropped the chained IRQ setup callback into GPIOLIB as we got rid
     of the last users of that in this changeset.

  New drivers:

   - New driver for Ingenic X1830.

   - New driver for Freescale i.MX8MP.

  Driver enhancements:

   - Fix all remaining Intel drivers to pass their IRQ chips along with
     the GPIO chips.

   - Intel Baytrail allocates its irqchip dynamically.

   - Intel Lynxpoint is thoroughly rewritten and modernized.

   - Aspeed AST2600 pin muxing and configuration is much improved.

   - Qualcomm SC7180 functions are updated and wakeup interrupt map is
     provided.

   - A whole slew of Renesas SH-PFC cleanups and improvements.

   - Fix up the Intel DT bindings to use the generic YAML DT bindings
     schema (a first user of this)"

* tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: madera: Remove extra blank line
  pinctrl: qcom: Don't lock around irq_set_irq_wake()
  pinctrl: mvebu: armada-37xx: use use platform api
  gpio: Drop the chained IRQ handler assign function
  pinctrl: freescale: Add i.MX8MP pinctrl driver support
  dt-bindings: imx: Add pinctrl binding doc for i.MX8MP
  pinctrl: tigerlake: Tiger Lake uses _HID enumeration
  pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID
  pinctrl: iproc: Use platform_get_irq_optional() to avoid error message
  pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema
  pinctrl: intel: Pass irqchip when adding gpiochip
  pinctrl: intel: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
  pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
  pinctrl: sunrisepoint: Add missing Interrupt Status register offset
  pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
  pinctrl: artpec6: fix __iomem on reg in set
  pinctrl: ingenic: Use devm_platform_ioremap_resource()
  pinctrl: ingenic: Factorize irq_set_type function
  pinctrl: ingenic: Remove duplicated ingenic_chip_info structures
  ...
gpio: Drop the chained IRQ handler assign function 2020-01-23T14:54:32+00:00 Linus Walleij linus.walleij@linaro.org 2020-01-13T22:08:00+00:00 72780ce5f1a4189f3c8dcfb1c596c65146452668 gpiochip_set_chained_irqchip() would assign a chained handler to a GPIO chip. We now populate struct gpio_irq_chip for all chained GPIO irqchips so drop this function. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200113220800.77817-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
gpiochip_set_chained_irqchip() would assign a chained handler
to a GPIO chip. We now populate struct gpio_irq_chip for all
chained GPIO irqchips so drop this function.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200113220800.77817-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge branch 'fixup-thunderx-hierarchy' into devel 2020-01-17T08:00:35+00:00 Linus Walleij linus.walleij@linaro.org 2020-01-17T08:00:35+00:00 8b844d78a72a9975730f4a65d66f7388a4dd9c38 






gpio: Fix the no return statement warning
2020-01-16T10:27:12+00:00

Kevin Hao
haokexin@gmail.com

2020-01-16T09:50:03+00:00

9c6722d85e92233082da2b3623685bba54d6093e

In commit 242587616710 ("gpiolib: Add support for the irqdomain which
doesn't use irq_fwspec as arg") we have changed the return type of
gpiochip_populate_parent_fwspec_twocell/fourcell() from void to void *,
but forgot to add a return statement for these two dummy functions.
Add "return NULL" to fix the build warnings.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20200116095003.30324-1-haokexin@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>





In commit 242587616710 ("gpiolib: Add support for the irqdomain which
doesn't use irq_fwspec as arg") we have changed the return type of
gpiochip_populate_parent_fwspec_twocell/fourcell() from void to void *,
but forgot to add a return statement for these two dummy functions.
Add "return NULL" to fix the build warnings.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20200116095003.30324-1-haokexin@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>