Pull misc driver updates from Greg KH:
 "Here is the big set of char, misc, iio, fpga, and other small driver
  subsystems changes for 7.2-rc1.

  Lots of little stuff in here, the majority being of course the IIO
  driver updates, as a list they are:

   - IIO driver updates and additions

   - GPIB driver bugfixes and cleanups

   - Android binder driver updates (rust and C version)

   - counter driver updates

   - MHI driver updates

   - mei driver updates

   - w1 driver updates

   - interconnect driver updates

   - Comedi driver fixes and updates

   - some obsolete char drivers removed (applicom and dtlk)

   - hwtracing driver updates

   - other tiny driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
  w1: ds2482: Use named initializers for arrays of i2c_device_data
  firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
  firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
  coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
  iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
  iio: chemical: scd30: Replace manual locking with RAII locking
  iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
  iio: dac: ad5686: create bus ops struct
  iio: dac: ad5686: cleanup doc header of local structs
  iio: dac: ad5686: add control_sync() for single-channel devices
  iio: dac: ad5686: add helpers to handle powerdown masks
  iio: dac: ad5686: add of_match table to the spi driver
  iio: dac: ad5686: drop enum id
  iio: dac: ad5686: remove redundant register definition
  iio: dac: ad5686: refactor include headers
  iio: adc: ad4080: fix AD4880 chip ID
  iio: light: veml3328: add support for new device
  dt-bindings: iio: light: veml6030: add veml3328
  fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
  fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
  ...

Pull remoteproc updates from Bjorn Andersson:

 - Add i.MX94 support to the i.MX remoteproc driver, covering the
   Cortex-M7 and Cortex-M33 Sync cores. This also fixes programming of
   non-zero System Manager CPU/LMM reset vectors.

 - Move the remoteproc resource table definitions to a separate header,
   so they can be used by clients that do not otherwise depend on
   remoteproc. Switch the firmware resource handling over to the common
   iterator.

 - Update the Xilinx R5F remoteproc driver to check the remote core
   state before attaching, drop a binding header dependency, and add
   firmware-name based auto boot support.

 - Add Qualcomm Hawi ADSP/CDSP bindings, together with Shikra RPM
   bindings and CDSP, LPAICP, and MPSS PAS support. Fix a Qualcomm
   minidump leak, clean up PAS and WCSS reset handling, and make the
   user-visible Qualcomm naming consistent.

 - Remove a duplicate STM32_RPROC Kconfig dependency and make i.MX
   remoteproc instances use the device node name so multiple processors
   can be distinguished in sysfs.

* tag 'rproc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  remoteproc: qcom: pas: Drop start/stop completion from struct qcom_pas
  remoteproc: qcom: pas: Add Shikra remoteproc support
  dt-bindings: remoteproc: qcom,shikra-pas: Document Shikra PAS remoteprocs
  dt-bindings: remoteproc: Add Shikra RPM processor compatible
  remoteproc: qcom: Unify user-visible "Qualcomm" name
  remoteproc: qcom: Fix leak when custom dump_segments addition fails
  remoteproc: qcom_q6v5_wcss: drop redundant wcss_q6_bcr_reset
  dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi CDSP compatible
  dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi ADSP compatible
  remoteproc: xlnx: Enable auto boot feature
  dt-bindings: remoteproc: xlnx: Add firmware-name property
  remoteproc: xlnx: Remove binding header dependency
  remoteproc: imx_rproc: Use device node name as processor name
  remoteproc: use rsc_table_for_each_entry() in rproc_handle_resources()
  remoteproc: Move resource table data structure to its own header
  remoteproc: xlnx: Check remote core state
  remoteproc: imx_rproc: Add support for i.MX94
  remoteproc: imx_rproc: Program non-zero SM CPU/LMM reset vector
  dt-bindings: remoteproc: imx-rproc: Support i.MX94
  remoteproc: Dead code cleanup in Kconfig for STM32_RPROC

Pull SoC driver updates from Arnd Bergmann:
 "There are a few added drivers, but mostly the normal maintenance to
  drivers for firmware, memory controller and other soc specific
  hardware:

   - The NXP QuickEngine gets modern MSI support, which allows some
     cleanups to the GICv3 irqchip chip driver

   - A new SoC specific driver for the Renesas R-Car MFIS unit is added,
     encapsulating support for the on-chip mailbox and hwspinlock
     implementations that are not easily separated into individual
     drivers

   - The Qualcomm SoC drivers add support for additional SoC
     implementations, and flexibility around power management for the
     serial-engine driver as well as probing the LLCC driver using
     custom hardware descriptions inside of the device itself.

   - Added support for the Samsung thermal management unit

   - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
     APIs and allow multiple PMC instances everywhere.

   - Updates to the TI SCI and KNAS drivers to improve suspend/resume
     support.

   - Minor driver changes for mediatek, xilinx, allwinner, aspeed,
     tegra, broadcom, amd, microchip and starfive specific drivers

   - Memory controller updates for Tegra and Renesas for additional SoC
     types and other improvements.

   - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
     update driver probing, object lifetimes and address minor bugs"

* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
  Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
  memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
  memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
  memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
  soc: aspeed: cleanup dead default for ASPEED_SOCINFO
  firmware: tegra: bpmp: Add support for multi-socket platforms
  firmware: tegra: bpmp: Propagate debugfs errors
  soc/tegra: pmc: Add Tegra238 support
  soc/tegra: pmc: Restrict power-off handler to Nexus 7
  soc/tegra: pmc: Populate powergate debugfs only when needed
  soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
  soc/tegra: pmc: Remove unused legacy functions
  soc/tegra: pmc: Create PMC context dynamically
  firmware: samsung: acpm: remove compile-testing stubs
  firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
  firmware: samsung: acpm: Add TMU protocol support
  firmware: samsung: acpm: Make acpm_ops const and access via pointer
  firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
  ...

This reverts commit 47d7bca76dd4f36ba0525d761f247c76ec9e4b17, which was
merged by accident.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung SoC drivers for v7.2

Improve Samsung Exynos (and Google GS101) ACPM (Alive Clock and Power
Manager) firmware driver:
1. Few code improvements.
2. Add support for protocol used to communicate with Thermal Management
   Unit (TMU).  This will allow to implement the thermal driver working
   for newer Samsung Exynos and Google GS101 SoCs.

* tag 'samsung-drivers-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  firmware: samsung: acpm: remove compile-testing stubs
  firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
  firmware: samsung: acpm: Add TMU protocol support
  firmware: samsung: acpm: Make acpm_ops const and access via pointer
  firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
  firmware: samsung: acpm: Consolidate transfer initialization helper
  firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
  firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
  firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
  firmware: samsung: acpm: Fix mailbox channel leak on probe error
  firmware: samsung: acpm: Fix cross-thread RX length corruption

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add entry in Stratix10 service layer that allow client to retrieve the ATF
version at runtime, which is useful for system diagnostics, compatibility
checks, and ensuring the correct secure firmware is in use.

The change introduces:
- A new service command definition in the Stratix10 service layer to
initiate the ATF version query.
- A corresponding macro definition in the header file to expose the command
ID for use by other components.

The service layer uses a Secure Monitor Call (SMC) to communicate with the
ATF and retrieve the version string, which can then be logged or validated
by client application.

Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Sashiko reported an inconsistent use of NULL vs ERR_PTR()
returns in the stub helpers in xynos-acpm-protocol.h.

Since this only happens on dead code for COMPILE_TEST=y, this is not
really a bug though.  Having stub functions that return NULL is a common
way to define optional interfaces, where callers still work when the
feature is disabled, though this clearly does not work for acpm because
some callers have a NULL pointer dereference when compile testing.

Since CONFIG_EXYNOS_ACPM_PROTOCOL already supports compile-testing itself,
and all (both) drivers using it clearly require the support, so this
just simplifies the option space without losing any build coverage.

Remove the stub functions entirely and adjust the one Kconfig
dependency to require EXYNOS_ACPM_PROTOCOL unconditionally.

Fixes: 6837c006d4e7 ("firmware: exynos-acpm: add empty method to allow compile test")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org
Link: https://lore.kernel.org/all/a7994860-24a3-4f87-84bf-109ed653dda4@linaro.org/
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260529134454.2147446-1-arnd@kernel.org
[krzk: Rebase on difference in devm_acpm_get_by_node()]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Introduce devm_acpm_get_by_phandle() to standardize how consumer
drivers acquire a handle to the ACPM IPC interface. Enforce the
use of the "samsung,acpm-ipc" property name across the SoC and
simplify the boilerplate code in client drivers.

The first consumer of this helper is the Exynos ACPM Thermal Management
Unit (TMU) driver. The TMU utilizes a hybrid management approach: direct
register access from the Application Processor (AP) is restricted to the
interrupt pending (INTPEND) registers for event identification.
High-level functional tasks, such as sensor initialization, threshold
programming, and temperature reads, are delegated to the ACPM firmware
via this IPC interface.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-6-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The Thermal Management Unit (TMU) on the Google GS101 SoC is managed
through a hybrid model shared between the kernel and the Alive Clock
and Power Manager (ACPM) firmware.

Add the protocol helpers required to communicate with the ACPM for
thermal operations, including initialization, threshold configuration,
temperature reading, and system suspend/resume handshakes.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-5-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Replace the embedded `struct acpm_ops` inside `struct acpm_handle` with
a pointer to a `const struct acpm_ops`.

Previously, the operations structure was embedded directly within the
handle and populated dynamically at runtime via `acpm_setup_ops()`.
This resulted in mutable function pointers and unnecessary per-instance
memory overhead.

By defining `exynos_acpm_driver_ops` statically as a `const` structure,
the function pointers are now safely housed in the read-only `.rodata`
section. This improves security by preventing function pointer
overwrites, saves memory, and slightly reduces initialization overhead
in `acpm_probe()`.

Consequently, update all consumer drivers (clk, mfd) to access the
operations via the new pointer indirection (`->ops->`). Finally, fix
the previously empty kernel-doc description for the ops member to
reflect its new pointer nature.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-4-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>