linux.git/include/linux/device.h, branch v5.2-rc4 Linux kernel source tree Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2019-05-09T21:50:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-05-09T21:50:09+00:00 ea5aee6d97fd2d4499b1eebc233861c1def70f06 Pull clk framework updates from Stephen Boyd: "We have a couple new features and changes in the core clk framework this time around because we've finally gotten around to fixing some long standing issues. There's still work to do though, so this pull request is largely laying down the foundation for all the driver changes to come in the next merge window. The first problem we're alleviating is how parents of clks are specified. With the new method, we should see lots of drivers migrate away from the current design of string comparisons on the entire clk tree to a more direct method where they can use clk_hw pointers or more localized names specified in DT or via clkdev. This should reduce our reliance on string comparisons for all the topology description logic that we've been using for years and hopefully speed some things up while avoiding problems we have with generating clk names. Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't really helping anyone and we introduced big-endian versions of the basic clk types so that we can get rid of clk_{readl,writel}(). Both of these are things that driver developers have tried to use over the years that I typically bat away during code reviews because they're not useful. It's great to see these two things go away so maintainers can save time not worrying about these things. On the driver side we got the usual collection of new SoC support and non-critical fixes and updates to existing code. The big topics that stand out are the new driver support for Mediatek MT8183 and MT8516 SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The other patches in the driver pile are mostly fixes for things that are being used for the first time or additions for clks that couldn't be tested before because there wasn't a consumer driver that exercised them. Details are below and also in the sub-maintainer tags. Core: - Remove clk_readl() and introduce BE versions of basic clk types - Rewrite how clk parents can be specified to allow DT/clkdev lookups - Removal of the CLK_IS_BASIC clk flag - Framework documentation updates and fixes New Drivers: - Support for STM32F769 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support - Support for Cirrus Logic Lochnagar clks Updates: - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Various static analysis fixes/finds and const markings - Video Engine (ECLK) support on Aspeed SoCs - Xilinx ZynqMP Versal platform support - Convert Xilinx ZynqMP driver to be struct oriented - Fixes for Rockchip rk3328 and rk3288 SoCs - Sub-type for Rockchip SoCs where mux and divider aren't a single register - Remove SNVS clock from i.MX7UPL clock driver and bindings - Improve i.MX5 clock driver for i.MX50 support - Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU) - Export a new clock for the MBUS controller on the A13 - Allwinner H6 fixes to support a finer clocking of the video and VPU engines - Add g12a support in the Amlogic axg audio clock controller - Add missing PCI USB clock on Rensas RZ/N1 - Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E - A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h> - VPU and Video Decoder clocks on Amlogic Meson8b - Finally remove the wrong ABP Meson8b clock id - Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A - Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller - Un-expose some Amlogic AXG-Audio input clocks IDs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits) clk: Cache core in clk_fetch_parent_index() without names clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset dt-bindings: clk: add documentation for the SiFive PRCI driver clk: stm32mp1: Add ddrperfm clock clk: Remove CLK_IS_BASIC clk flag clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description ... 
Pull clk framework updates from Stephen Boyd:
 "We have a couple new features and changes in the core clk framework
  this time around because we've finally gotten around to fixing some
  long standing issues. There's still work to do though, so this pull
  request is largely laying down the foundation for all the driver
  changes to come in the next merge window.

  The first problem we're alleviating is how parents of clks are
  specified. With the new method, we should see lots of drivers migrate
  away from the current design of string comparisons on the entire clk
  tree to a more direct method where they can use clk_hw pointers or
  more localized names specified in DT or via clkdev. This should reduce
  our reliance on string comparisons for all the topology description
  logic that we've been using for years and hopefully speed some things
  up while avoiding problems we have with generating clk names.

  Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't
  really helping anyone and we introduced big-endian versions of the
  basic clk types so that we can get rid of clk_{readl,writel}(). Both
  of these are things that driver developers have tried to use over the
  years that I typically bat away during code reviews because they're
  not useful. It's great to see these two things go away so maintainers
  can save time not worrying about these things.

  On the driver side we got the usual collection of new SoC support and
  non-critical fixes and updates to existing code. The big topics that
  stand out are the new driver support for Mediatek MT8183 and MT8516
  SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The
  other patches in the driver pile are mostly fixes for things that are
  being used for the first time or additions for clks that couldn't be
  tested before because there wasn't a consumer driver that exercised
  them. Details are below and also in the sub-maintainer tags.

  Core:
   - Remove clk_readl() and introduce BE versions of basic clk types
   - Rewrite how clk parents can be specified to allow DT/clkdev lookups
   - Removal of the CLK_IS_BASIC clk flag
   - Framework documentation updates and fixes

  New Drivers:
   - Support for STM32F769
   - AT91 sam9x60 PMC support
   - SiFive FU540 PRCI and PLL support
   - Qualcomm QCS404 CDSP clk support
   - Qualcomm QCS404 Turing clk support
   - Mediatek MT8183 clock support
   - Mediatek MT8516 clock support
   - Milbeaut M10V clk controller support
   - Support for Cirrus Logic Lochnagar clks

  Updates:
   - Rework AT91 sckc DT bindings
   - Fix slow RC oscillator issue on sama5d3
   - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
   - Various static analysis fixes/finds and const markings
   - Video Engine (ECLK) support on Aspeed SoCs
   - Xilinx ZynqMP Versal platform support
   - Convert Xilinx ZynqMP driver to be struct oriented
   - Fixes for Rockchip rk3328 and rk3288 SoCs
   - Sub-type for Rockchip SoCs where mux and divider aren't a single register
   - Remove SNVS clock from i.MX7UPL clock driver and bindings
   - Improve i.MX5 clock driver for i.MX50 support
   - Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU)
   - Export a new clock for the MBUS controller on the A13
   - Allwinner H6 fixes to support a finer clocking of the video and VPU engines
   - Add g12a support in the Amlogic axg audio clock controller
   - Add missing PCI USB clock on Rensas RZ/N1
   - Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E
   - A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h>
   - VPU and Video Decoder clocks on Amlogic Meson8b
   - Finally remove the wrong ABP Meson8b clock id
   - Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A
   - Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller
   - Un-expose some Amlogic AXG-Audio input clocks IDs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
  clk: Cache core in clk_fetch_parent_index() without names
  clk: imx: correct pfdv2 gate_bit/vld_bit operations
  clk: sifive: add a driver for the SiFive FU540 PRCI IP block
  clk: analogbits: add Wide-Range PLL library
  clk: imx: clk-pllv3: mark expected switch fall-throughs
  clk: imx8mq: Add dsi_ipg_div
  clk: imx: pllv4: add fractional-N pll support
  clk: sunxi-ng: Use the correct style for SPDX License Identifier
  clk: sprd: Use the correct style for SPDX License Identifier
  clk: renesas: Use the correct style for SPDX License Identifier
  clk: qcom: Use the correct style for SPDX License Identifier
  clk: davinci: Use the correct style for SPDX License Identifier
  clk: actions: Use the correct style for SPDX License Identifier
  clk: imx: keep uart clock on during system boot
  clk: imx: correct i.MX7D AV PLL num/denom offset
  dt-bindings: clk: add documentation for the SiFive PRCI driver
  clk: stm32mp1: Add ddrperfm clock
  clk: Remove CLK_IS_BASIC clk flag
  clock: milbeaut: Add Milbeaut M10V clock controller
  dt-bindings: clock: milbeaut: add Milbeaut clock description
  ...
Merge branch 'clk-parent-rewrite-1' into clk-next 2019-05-07T18:46:13+00:00 Stephen Boyd sboyd@kernel.org 2019-05-07T18:46:13+00:00 c1157f60d72e8b20efc670cef28883832f42406c - Rewrite how clk parents can be specified to be DT/clkdev based instead of just string based * clk-parent-rewrite-1: clk: Cache core in clk_fetch_parent_index() without names clk: fixed-factor: Initialize clk_init_data on stack clk: fixed-factor: Let clk framework find parent clk: Allow parents to be specified via clkspec index clk: Look for parents with clkdev based clk_lookups clk: Allow parents to be specified without string names clk: Add of_clk_hw_register() API for early clk drivers driver core: Let dev_of_node() accept a NULL dev clk: Prepare for clk registration API that uses DT nodes clkdev: Move clk creation outside of 'clocks_mutex' 
 - Rewrite how clk parents can be specified to be DT/clkdev based instead
   of just string based

* clk-parent-rewrite-1:
  clk: Cache core in clk_fetch_parent_index() without names
  clk: fixed-factor: Initialize clk_init_data on stack
  clk: fixed-factor: Let clk framework find parent
  clk: Allow parents to be specified via clkspec index
  clk: Look for parents with clkdev based clk_lookups
  clk: Allow parents to be specified without string names
  clk: Add of_clk_hw_register() API for early clk drivers
  driver core: Let dev_of_node() accept a NULL dev
  clk: Prepare for clk registration API that uses DT nodes
  clkdev: Move clk creation outside of 'clocks_mutex'
driver core: Let dev_of_node() accept a NULL dev 2019-04-19T21:24:32+00:00 Stephen Boyd sboyd@kernel.org 2019-04-12T18:31:45+00:00 1b833924e5b3cea92306069a0f366529341dd260 We'd like to chain this in places where the 'dev' argument might be NULL. Let this function take a NULL 'dev' so this can work. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
We'd like to chain this in places where the 'dev' argument might be
NULL. Let this function take a NULL 'dev' so this can work.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
device.h: reorganize struct device 2019-04-01T05:37:12+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2019-02-26T14:32:29+00:00 159ef31e81edd75225c6a844115faf999de67b38 struct device is big, around 760 bytes on x86_64. It's not a critical structure, but it is embedded everywhere, so making it smaller is always a good thing. With a recent patch that moved a field from struct device to the private structure, some benchmarks showed a very odd regression, despite this structure having nothing to do with those benchmarks. That caused me to look into the layout of the structure. Using 'pahole', it showed a number of holes and ways that the structure could be reordered in order to align some cachelines better, as well as reduce the size of the overall structure. Move 'struct kobj' to the start of the structure, to keep that access in the first cacheline, and try to organize things a bit more compactly where possible By doing these few moves, the result removes at least 8 bytes from 'struct device' on a 64bit system. Given we know there are systems with at least 30k devices in memory at once, every little byte counts, and this change could be a savings of 240k of kernel memory for them. On "normal" systems the overall memory savings would be much less. Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
struct device is big, around 760 bytes on x86_64.  It's not a critical
structure, but it is embedded everywhere, so making it smaller is always
a good thing.

With a recent patch that moved a field from struct device to the private
structure, some benchmarks showed a very odd regression, despite this
structure having nothing to do with those benchmarks.  That caused me to
look into the layout of the structure.  Using 'pahole', it showed a
number of holes and ways that the structure could be reordered in order
to align some cachelines better, as well as reduce the size of the
overall structure.

Move 'struct kobj' to the start of the structure, to keep that access
in the first cacheline, and try to organize things a bit more compactly
where possible

By doing these few moves, the result removes at least 8 bytes from
'struct device' on a 64bit system.  Given we know there are systems with
at least 30k devices in memory at once, every little byte counts, and
this change could be a savings of 240k of kernel memory for them.  On
"normal" systems the overall memory savings would be much less.

Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
driver core: remove BUS_ATTR() 2019-03-18T06:07:30+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-10-29T15:32:31+00:00 cd1b772d4881d1cd15b90ec17aab9ac7950e8850 There are now no in-kernel users of BUS_ATTR() so drop it from device.h Everyone should use BUS_ATTR_RO/RW/WO() from now on. Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
There are now no in-kernel users of BUS_ATTR() so drop it from device.h

Everyone should use BUS_ATTR_RO/RW/WO() from now on.

Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping 2019-03-10T18:54:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-03-10T18:54:48+00:00 b7a7d1c1ec688104fdc922568c26395a756f616d Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ... 
Pull DMA mapping updates from Christoph Hellwig:

 - add debugfs support for dumping dma-debug information (Corentin
   Labbe)

 - Kconfig cleanups (Andy Shevchenko and me)

 - debugfs cleanups (Greg Kroah-Hartman)

 - improve dma_map_resource and use it in the media code

 - arch_setup_dma_ops / arch_teardown_dma_ops cleanups

 - various small cleanups and improvements for the per-device coherent
   allocator

 - make the DMA mask an upper bound and don't fail "too large" dma mask
   in the remaning two architectures - this will allow big driver
   cleanups in the following merge windows

* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
  Documentation/DMA-API-HOWTO: update dma_mask sections
  sparc64/pci_sun4v: allow large DMA masks
  sparc64/iommu: allow large DMA masks
  sparc64: refactor the ali DMA quirk
  ccio: allow large DMA masks
  dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
  dma-mapping: remove dma_mark_declared_memory_occupied
  dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
  dma-mapping: improve selection of dma_declare_coherent availability
  dma-mapping: remove an incorrect __iommem annotation
  of: select OF_RESERVED_MEM automatically
  device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
  mfd/sm501: depend on HAS_DMA
  dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
  dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
  dma-mapping: move debug configuration options to kernel/dma
  dma-debug: add dumping facility via debugfs
  dma: debug: no need to check return value of debugfs_create functions
  videobuf2: replace a layering violation with dma_map_resource
  dma-mapping: don't BUG when calling dma_map_resource on RAM
  ...
linux/device.h: use DYNAMIC_DEBUG_BRANCH in dev_dbg_ratelimited 2019-03-08T02:31:59+00:00 Rasmus Villemoes linux@rasmusvillemoes.dk 2019-03-08T00:27:21+00:00 e0b73d7beb919ada05465a7d70e9ce134e7a6d8a Patch series "various dynamic_debug patches", v4. This started as an experiment to see how hard it would be to change the four pointers in struct _ddebug into relative offsets, a la CONFIG_GENERIC_BUG_RELATIVE_POINTERS, thus saving 16 bytes per pr_debug site (and thus exactly making up for the extra space used by the introduction of jump labels in 9049fc74). I stumbled on a few things that are probably worth fixing regardless of whether that goal is deemed worthwhile. Back at v3 (in November), I redid the implementation on top of the fancy new asm-macros stuff. Luckily enough, v3 didn't get picked up, since the asm-macros were backed out again. I still want to do the relative-pointers thing eventually, but we're close to the merge window opening, so here's just most of the "incidental" patches, some of which also serve as preparation for the relative pointers. This patch (of 4): dev_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-2-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Patch series "various dynamic_debug patches", v4.

This started as an experiment to see how hard it would be to change the
four pointers in struct _ddebug into relative offsets, a la
CONFIG_GENERIC_BUG_RELATIVE_POINTERS, thus saving 16 bytes per pr_debug
site (and thus exactly making up for the extra space used by the
introduction of jump labels in 9049fc74).  I stumbled on a few things
that are probably worth fixing regardless of whether that goal is deemed
worthwhile.

Back at v3 (in November), I redid the implementation on top of the fancy
new asm-macros stuff.  Luckily enough, v3 didn't get picked up, since
the asm-macros were backed out again.  I still want to do the
relative-pointers thing eventually, but we're close to the merge window
opening, so here's just most of the "incidental" patches, some of which
also serve as preparation for the relative pointers.

This patch (of 4):

dev_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned
way, and doesn't utilize the static key/jump label implementation when
CONFIG_JUMP_LABEL is set.  Use the DYNAMIC_DEBUG_BRANCH which is defined
appropriately.

Link: http://lkml.kernel.org/r/20190212214150.4807-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2019-03-07T00:48:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-03-07T00:48:27+00:00 f90d64483ebd394958841f67f8794ab203b319a7 Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ... 
Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver pull request for 5.1-rc1.

  The usual set of gadget driver updates, phy driver updates, xhci
  updates, and typec additions. Also included in here are a lot of small
  cleanups and fixes and driver updates where needed.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  wusb: Remove unnecessary static function ckhdid_printf
  usb: core: make default autosuspend delay configurable
  usb: core: Fix typo in description of "authorized_default"
  usb: chipidea: Refactor USB PHY selection and keep a single PHY
  usb: chipidea: Grab the (legacy) USB PHY by phandle first
  usb: chipidea: imx: set power polarity
  dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
  usb: chipidea: imx: remove unused header files
  usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
  usb: core: add option of only authorizing internal devices
  usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
  usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
  usb: xhci: fix build warning - missing prototype
  usb: xhci: dbc: Fixing typo error.
  usb: xhci: remove unused member 'parent' in xhci_regset struct
  xhci: tegra: Prevent error pointer dereference
  USB: serial: option: add Telit ME910 ECM composition
  usb: core: Replace hardcoded check with inline function from usb.h
  usb: core: skip interfaces disabled in devicetree
  usb: typec: mux: remove redundant check on variable match
  ...
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core 2019-03-06T22:52:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-03-06T22:52:48+00:00 e431f2d74e1b91e00e71e97cadcadffc4cda8a9b Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ... 
Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...
Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2019-03-06T20:59:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-03-06T20:59:46+00:00 ef8006846a3a97d9d8bf49e63dba948d0d2dbbf0 Pull power management updates from Rafael Wysocki: "These are PM-runtime framework changes to use ktime instead of jiffies for accounting, new PM core flag to mark devices that don't need any form of power management, cpuidle updates including driver API documentation and a new governor, cpufreq updates including a new driver for Armada 8K, thermal cleanups and more, some energy-aware scheduling (EAS) enabling changes, new chips support in the intel_idle and RAPL drivers and assorted cleanups in some other places. Specifics: - Update the PM-runtime framework to use ktime instead of jiffies for accounting (Thara Gopinath, Vincent Guittot) - Optimize the autosuspend code in the PM-runtime framework somewhat (Ladislav Michl) - Add a PM core flag to mark devices that don't need any form of power management (Sudeep Holla) - Introduce driver API documentation for cpuidle and add a new cpuidle governor for tickless systems (Rafael Wysocki) - Add Jacobsville support to the intel_idle driver (Zhang Rui) - Clean up a cpuidle core header file and the cpuidle-dt and ACPI processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam) - Add new cpufreq driver for Armada 8K (Gregory Clement) - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit Kucheria) - Add support for light-weight tear-down and bring-up of CPUs to the cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar) - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling auto-registration to the cpufreq core and use it in multiple cpufreq drivers (Amit Kucheria) - Fix some minor issues and do some cleanups in the davinci, e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel, Taniya Das, Viresh Kumar) - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng Wang) - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu, Rafael Wysocki) - Clean up multiple cpufreq drivers (Yangtao Li) - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas Bulwahn) - Add support for exposing the Energy Model via debugfs and make multiple cpufreq drivers register an Energy Model to support energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias Kaehlcke) - Add Ice Lake mobile and Jacobsville support to the Intel RAPL power-capping driver (Gayatri Kammela, Zhang Rui) - Add a power estimation helper to the operating performance points (OPP) framework and clean up a core function in it (Quentin Perret, Viresh Kumar) - Make minor improvements in the generic power domains (genpd), OPP and system suspend frameworks and in the PM core (Aditya Pakki, Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)" * tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions PM / core: Add support to skip power management in device/driver model cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars powercap/intel_rapl: add Ice Lake mobile ACPI / processor: Set P_LVL{2,3} idle state descriptions cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon .. 
Pull power management updates from Rafael Wysocki:
 "These are PM-runtime framework changes to use ktime instead of jiffies
  for accounting, new PM core flag to mark devices that don't need any
  form of power management, cpuidle updates including driver API
  documentation and a new governor, cpufreq updates including a new
  driver for Armada 8K, thermal cleanups and more, some energy-aware
  scheduling (EAS) enabling changes, new chips support in the intel_idle
  and RAPL drivers and assorted cleanups in some other places.

  Specifics:

   - Update the PM-runtime framework to use ktime instead of jiffies for
     accounting (Thara Gopinath, Vincent Guittot)

   - Optimize the autosuspend code in the PM-runtime framework somewhat
     (Ladislav Michl)

   - Add a PM core flag to mark devices that don't need any form of
     power management (Sudeep Holla)

   - Introduce driver API documentation for cpuidle and add a new
     cpuidle governor for tickless systems (Rafael Wysocki)

   - Add Jacobsville support to the intel_idle driver (Zhang Rui)

   - Clean up a cpuidle core header file and the cpuidle-dt and ACPI
     processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)

   - Add new cpufreq driver for Armada 8K (Gregory Clement)

   - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
     Kucheria)

   - Add support for light-weight tear-down and bring-up of CPUs to the
     cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)

   - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
     auto-registration to the cpufreq core and use it in multiple
     cpufreq drivers (Amit Kucheria)

   - Fix some minor issues and do some cleanups in the davinci,
     e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
     (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
     Taniya Das, Viresh Kumar)

   - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
     Wang)

   - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
     Rafael Wysocki)

   - Clean up multiple cpufreq drivers (Yangtao Li)

   - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
     Bulwahn)

   - Add support for exposing the Energy Model via debugfs and make
     multiple cpufreq drivers register an Energy Model to support
     energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
     Kaehlcke)

   - Add Ice Lake mobile and Jacobsville support to the Intel RAPL
     power-capping driver (Gayatri Kammela, Zhang Rui)

   - Add a power estimation helper to the operating performance points
     (OPP) framework and clean up a core function in it (Quentin Perret,
     Viresh Kumar)

   - Make minor improvements in the generic power domains (genpd), OPP
     and system suspend frameworks and in the PM core (Aditya Pakki,
     Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"

* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
  cpufreq: kryo: Release OPP tables on module removal
  cpufreq: ap806: add missing of_node_put after of_device_is_available
  cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
  cpufreq: Pass updated policy to driver ->setpolicy() callback
  cpufreq: Fix two debug messages in cpufreq_set_policy()
  cpufreq: Reorder and simplify cpufreq_update_policy()
  cpufreq: Add kerneldoc comments for two core functions
  PM / core: Add support to skip power management in device/driver model
  cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
  cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
  cpufreq: intel_pstate: Avoid redundant initialization of local vars
  powercap/intel_rapl: add Ice Lake mobile
  ACPI / processor: Set P_LVL{2,3} idle state descriptions
  cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
  ACPI / CPPC: Add a helper to get desired performance
  cpufreq: davinci: move configuration to include/linux/platform_data
  cpufreq: speedstep: convert BUG() to BUG_ON()
  cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
  cpufreq: longhaul: remove unneeded semicolon
  cpufreq: pcc-cpufreq: remove unneeded semicolon
  ..