Pull timekeeping updates from Thomas Gleixner:
"Updates for NTP/timekeeping and PTP:
- Expand timekeeping snapshot mechanisms
The various snapshot functions are mostly used for PTP to collect
"atomic" snapshots of various involved clocks.
They lack support for the recently introduced AUX clocks and do not
provide the underlying counter value (e.g. TSC) to user space.
Exposing the counter value snapshot allows for better control and
steering.
Convert the hard wired ktime_get_snapshot() to take a clock ID,
which allows the caller to select the clock ID to be captured along
with CLOCK_MONONOTONIC_RAW. Additionally capture the underlying
hardware counter value and the clock source ID of the counter.
Expand the hardware based snapshot capture where devices provide a
mechanism to snapshot the hardware PTP clock and the system counter
(usually via PCI/PTM) to support AUX clocks and also provide the
captured counter value back to the caller and not only the clock
timestamps derived from it.
- Add a new optional read_snapshot() callback to clocksources
That is required to capture atomic snapshots from clocksources
which are derived from TSC with a scaling mechanism (e.g. Hyper-V,
KVMclock).
The value pair is handed back in the snapshot structure to the
callers, so they can do the necessary correlations in a more
precise way.
This touches usage sites of the affected functions and data structure
all over the tree, but stays fully backwards compatible for the
existing user space exposed interfaces. New PTP IOCTLs will provide
access to the extended functionality in later kernel versions"
* tag 'timers-ptp-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (28 commits)
ptp: vmclock: Use hw_cycles from snapshot for precise TSC pairing
x86/kvmclock: Implement read_snapshot() for kvmclock clocksource
clocksource/hyperv: Implement read_snapshot() for TSC page clocksource
timekeeping: Add clocksource read_snapshot() method and hw_cycles to snapshot
ptp: Switch to ktime_get_snapshot_id() for pre/post timestamps
timekeeping: Add support for AUX clock cross timestamping
timekeeping: Remove system_device_crosststamp::sys_realtime
ALSA: hda/common: Use system_device_crosststamp::sys_systime
wifi: iwlwifi: Use system_device_crosststamp::sys_systime
ptp: Use system_device_crosststamp::sys_systime
timekeeping: Prepare for cross timestamps on arbitrary clock IDs
timekeeping: Remove ktime_get_snapshot()
virtio_rtc: Use provided clock ID for history snapshot
net/mlx5: Use provided clock ID for history snapshot
igc: Use provided clock ID for history snapshot
ice/ptp: Use provided clock ID for history snapshot
wifi: iwlwifi: Adopt PTP cross timestamps to core changes
timekeeping: Add CLOCK ID to system_device_crosststamp
timekeeping: Add system_counterval_t to struct system_device_crosststamp
timekeeping: Add CLOCK_AUX support for ktime_get_snapshot_id()
...
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core subsystem:
- Harden the user space controllable hrtimer interfaces further to
protect against unpriviledged DoS attempts by arming timers in the
past.
- Add per-capacity hierarchies to the timer migration code to prevent
timer migration accross different capacity domains. This code has
been disabled last minute as there is a pathological problem with
SoCs which advertise a larger number of capacity domains. The
problem is under investigation and the code won't be active before
v7.3, but that turned out to be less intrusive than a full revert
as it preserves the preparatory steps and allows people to work on
the final resolution
- Export time namespace functionality as a recent user can be built
as a module.
- Initialize the jiffies clocksource before using it. The recent
hardening against time moving backward requires that the related
members of struct clocksource have been initialized, otherwise it
clamps the readout to 0, which makes time stand sill and causes
boot delays.
- Fix a more than twenty year old PID reference count leak in an
error path of the POSIX CPU timer code.
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'timers-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (31 commits)
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
time/jiffies: Register jiffies clocksource before usage
timers/migration: Temporarily disable per capacity hierarchies
timers/migration: Turn tmigr_hierarchy level_list into a flexible array
timers/migration: Deactivate per-capacity hierarchies under nohz_full
timers/migration: Fix hotplug migrator selection target on asymetric capacity machines
ntsync: Honour caller's time namespace for absolute MONOTONIC timeouts
time/namespace: Export init_time_ns and do_timens_ktime_to_host()
timers/migration: Update stale @online doc to @available
timers: Fix flseep() typo in kernel-doc comment
hrtimer: Fix the bogus return type of __hrtimer_start_range_ns()
hrtimer: Return ktime_t from hrtimer_get_next_event()/hrtimer_next_event_without()
clocksource: Clean up clocksource_update_freq() functions
alarmtimer: Remove stale return description from alarm_handle_timer()
selftests/posix_timers: Use CLOCK_THREAD_CPUTIME_ID for ITIMER_PROF measurements
scripts/timers: Add timer_migration_tree.py
timers/migration: Handle capacity in connect tracepoints
timers/migration: Split per-capacity hierarchies
timers/migration: Track CPUs in a hierarchy
timers/migration: Abstract out hierarchy to prepare for CPU capacity awareness
...
Add a read_snapshot() callback to struct clocksource which returns the derived clocksource value while also providing the underlying hardware counter reading and the related clocksource ID. This allows ktime_get_snapshot_id() to populate new hw_cycles and hw_csid fields in struct system_time_snapshot. For clocksources that are derived from an underlying counter (e.g., Hyper-V TSC page scales TSC to 10MHz, kvmclock scales TSC to 1GHz), this provides atomic access to both the derived value needed for timekeeping calculations, and the raw hardware counter needed by consumers like KVM's master clock and the vmclock PTP driver. [ tglx: Reworked it slightly ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Assisted-by: Kiro:claude-opus-4.6-1m Link: https://patch.msgid.link/20260526230635.136914-1-dwmw2@infradead.org Link: https://patch.msgid.link/20260529195558.202568489@kernel.org
Introduce device-managed helpers for clocksource registration.
The clocksource framework currently provides __clocksource_register_scale()
along with convenience wrappers for Hz and kHz registration. However,
drivers must handle error paths and cleanup manually, typically by pairing
registration with an explicit clocksource_unregister() call.
Add a devm-based variant, __devm_clocksource_register_scale(), along with
devm_clocksource_register_hz() and devm_clocksource_register_khz() helpers.
These helpers register the clocksource and attach a devres action to
automatically unregister it on driver detach or probe failure.
This simplifies driver code by:
* removing explicit cleanup paths
* ensuring correct teardown ordering
* aligning with the devm-based resource management model widely used
across the kernel
While drivers can open-code devm_add_action_or_reset(), providing a
dedicated helper avoids duplication, reduces boilerplate, and ensures
consistent usage across drivers, following patterns used in other
subsystems.
This is also particularly useful for drivers built as modules, where
device-managed resource handling avoids manual cleanup in remove paths and
ensures correct teardown on module unload.
This helper is self-contained and can be adopted progressively by drivers.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260506153831.605159-1-daniel.lezcano@oss.qualcomm.com
Remove the unused functions __clocksource_update_freq_hz() and __clocksource_update_freq_khz(). Then make __clocksource_update_freq_scale() static as it is not used from external callers anymore. Also clean up the comment accordingly. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Acked-by: John Stultz <jstultz@google.com> Link: https://patch.msgid.link/20260504-clocksource-update_freq-v2-1-3e696fb01776@linutronix.de
Pull vdso updates from Thomas Gleixner: - Make the handling of compat functions consistent and more robust - Rework the underlying data store so that it is dynamically allocated, which allows the conversion of the last holdout SPARC64 to the generic VDSO implementation - Rework the SPARC64 VDSO to utilize the generic implementation - Mop up the left overs of the non-generic VDSO support in the core code - Expand the VDSO selftest and make them more robust - Allow time namespaces to be enabled independently of the generic VDSO support, which was not possible before due to SPARC64 not using it - Various cleanups and improvements in the related code * tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) timens: Use task_lock guard in timens_get*() timens: Use mutex guard in proc_timens_set_offset() timens: Simplify some calls to put_time_ns() timens: Add a __free() wrapper for put_time_ns() timens: Remove dependency on the vDSO vdso/timens: Move functions to new file selftests: vDSO: vdso_test_correctness: Add a test for time() selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c selftests: vDSO: vdso_test_correctness: Handle different tv_usec types selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers" random: vDSO: Remove ifdeffery random: vDSO: Trim vDSO includes vdso/datapage: Trim down unnecessary includes vdso/datapage: Remove inclusion of gettimeofday.h vdso/helpers: Explicitly include vdso/processor.h vdso/gettimeofday: Add explicit includes random: vDSO: Add explicit includes MIPS: vdso: Explicitly include asm/vdso/vdso.h ...
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design, which was
made in the context of systems far smaller than today, is based on the
assumption that the to be monitored clocksource (TSC) can be trivially
compared against a known to be stable clocksource (HPET/ACPI-PM timer).
Over the years it turned out that this approach has major flaws:
- Long delays between watchdog invocations can result in wrap arounds
of the reference clocksource
- Scalability of the reference clocksource readout can degrade on large
multi-socket systems due to interconnect congestion
This was addressed with various heuristics which degraded the accuracy of
the watchdog to the point that it fails to detect actual TSC problems on
older hardware which exposes slow inter CPU drifts due to firmware
manipulating the TSC to hide SMI time.
To address this and bring back sanity to the watchdog, rewrite the code
completely with a different approach:
1) Restrict the validation against a reference clocksource to the boot
CPU, which is usually the CPU/Socket closest to the legacy block which
contains the reference source (HPET/ACPI-PM timer). Validate that the
reference readout is within a bound latency so that the actual
comparison against the TSC stays within 500ppm as long as the clocks
are stable.
2) Compare the TSCs of the other CPUs in a round robin fashion against
the boot CPU in the same way the TSC synchronization on CPU hotplug
works. This still can suffer from delayed reaction of the remote CPU
to the SMP function call and the latency of the control variable cache
line. But this latency is not affecting correctness. It only affects
the accuracy. With low contention the readout latency is in the low
nanoseconds range, which detects even slight skews between CPUs. Under
high contention this becomes obviously less accurate, but still
detects slow skews reliably as it solely relies on subsequent readouts
being monotonically increasing. It just can take slightly longer to
detect the issue.
3) Rewrite the watchdog test so it tests the various mechanisms one by
one and validating the result against the expectation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Daniel J Blueman <daniel@quora.org>
Link: https://patch.msgid.link/20260123231521.926490888@kernel.org
Link: https://patch.msgid.link/87h5qeomm5.ffs@tglx
After sparc64, there are no remaining users of ARCH_CLOCKSOURCE_DATA and it can just be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Andreas Larsson <andreas@gaisler.com> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Acked-by: John Stultz <jstultz@google.com> Link: https://patch.msgid.link/20260304-vdso-sparc64-generic-2-v6-14-d8eb3b0e1410@linutronix.de [Thomas: drop sparc64 bits from the patch]
Some architectures have clockevent devices which are coupled to the system
clocksource by implementing a less than or equal comparator which compares
the programmed absolute expiry time against the underlying time
counter. Well known examples are TSC/TSC deadline timer and the S390 TOD
clocksource/comparator.
While the concept is nice it has some downsides:
1) The clockevents core code is strictly based on relative expiry times
as that's the most common case for clockevent device hardware. That
requires to convert the absolute expiry time provided by the caller
(hrtimers, NOHZ code) to a relative expiry time by reading and
substracting the current time.
The clockevent::set_next_event() callback must then read the counter
again to convert the relative expiry back into a absolute one.
2) The conversion factors from nanoseconds to counter clock cycles are
set up when the clockevent is registered. When NTP applies corrections
then the clockevent conversion factors can deviate from the
clocksource conversion substantially which either results in timers
firing late or in the worst case early. The early expiry then needs to
do a reprogam with a short delta.
In most cases this is papered over by the fact that the read in the
set_next_event() callback happens after the read which is used to
calculate the delta. So the tendency is that timers expire mostly
late.
All of this can be avoided by providing support for these devices in the
core code:
1) The timekeeping core keeps track of the last update to the clocksource
by storing the base nanoseconds and the corresponding clocksource
counter value. That's used to keep the conversion math for reading the
time within 64-bit in the common case.
This information can be used to avoid both reads of the underlying
clocksource in the clockevents reprogramming path:
delta = expiry - base_ns;
cycles = base_cycles + ((delta * clockevent::mult) >> clockevent::shift);
The resulting cycles value can be directly used to program the
comparator.
2) As #1 does not longer provide the "compensation" through the second
read the deviation of the clocksource and clockevent conversions
caused by NTP become more prominent.
This can be cured by letting the timekeeping core compute and store
the reverse conversion factors when the clocksource cycles to
nanoseconds factors are modified by NTP:
CS::MULT (1 << NS_TO_CYC_SHIFT)
--------------- = ----------------------
(1 << CS:SHIFT) NS_TO_CYC_MULT
Ergo: NS_TO_CYC_MULT = (1 << (CS::SHIFT + NS_TO_CYC_SHIFT)) / CS::MULT
The NS_TO_CYC_SHIFT value is calculated when the clocksource is
installed so that it aims for a one hour maximum sleep time.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260224163429.944763521@kernel.org
On some architectures clocksource::read() boils down to a single
instruction, so the indirect function call is just a massive overhead
especially with speculative execution mitigations in effect.
Allow architectures to enable conditional inlining of that read to avoid
that by:
- providing a static branch to switch to the inlined variant
- disabling the branch before clocksource changes
- enabling the branch after a clocksource change, when the clocksource
indicates in a feature flag that it is the one which provides the
inlined variant
This is intentionally not a static call as that would only remove the
indirect call, but not the rest of the overhead.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260224163429.675151545@kernel.org