linux.git/include/linux/clk, branch v4.5 Linux kernel source tree Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-01-21T02:03:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-01-21T02:03:56+00:00 6b5a12dbca7a8681ecb78dbebaedc1f8364ebd10 Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ... 
Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-01-21T01:44:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-01-21T01:44:16+00:00 0c582826a158d9cab69b9cc66d637aee73fed0dc Pull non-urgent ARM SoC fixes from Olof Johansson: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc. - MAINTAINERS updates to add a list for brcmstb and fix a typo - A handful of fixes for OMAP 81xx, a recently resurrected platform so these can't be considered real regressions and thus got queued. - A couple of other small fixes for scoop, sa1100 and davinci" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data ARM: sa1100/simpad: Be sure to clamp return value ARM: scoop: Be sure to clamp return value ARM: davinci: fix a problematic usage of WARN() ARM: davinci: only select WT cache if cache is enabled ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: dts: Fix dm814x pinctrl address and mask ARM: dts: Fix dm8148 control modules ranges ARM: OMAP2+: Fix timer entries for dm814x ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: OMAP2+: Add DPPLS clock manager for dm814x clk: ti: Add few dm814x clock aliases ARM: dts: Fix dm814x entries for pllss and prcm MAINTAINERS: gpio-brcmstb: Remove stray '>' MAINTAINERS: brcmstb: Include Broadcom internal mailing-list 
Pull non-urgent ARM SoC fixes from Olof Johansson:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - MAINTAINERS updates to add a list for brcmstb and fix a typo
   - A handful of fixes for OMAP 81xx, a recently resurrected platform
     so these can't be considered real regressions and thus got queued.
   - A couple of other small fixes for scoop, sa1100 and davinci"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
  ARM: sa1100/simpad: Be sure to clamp return value
  ARM: scoop: Be sure to clamp return value
  ARM: davinci: fix a problematic usage of WARN()
  ARM: davinci: only select WT cache if cache is enabled
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: dts: Fix dm814x entries for pllss and prcm
  MAINTAINERS: gpio-brcmstb: Remove stray '>'
  MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
ARM: OMAP2+: Add DPPLS clock manager for dm814x 2015-12-10T00:53:46+00:00 Tony Lindgren tony@atomide.com 2015-12-03T20:02:31+00:00 4e34df0cba14e95e941bf73721352fa4d9c2622f On dm814x we have some clocks at DPLLS and some at PRCM. Let's add a new omap_prcm_init_data entry for the DPLLS so we can initalize timer clocks early. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
On dm814x we have some clocks at DPLLS and some at PRCM. Let's add a new
omap_prcm_init_data entry for the DPLLS so we can initalize timer clocks
early.

Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
clk: mmp: stop using platform headers 2015-12-01T20:44:22+00:00 Arnd Bergmann arnd@arndb.de 2014-04-15T13:20:50+00:00 990f2f223cb479a15afda9eb8552582aa82e2404 The mmp clock drivers currently hardcode the physical addresses for the clock registers. This is generally a bad idea, and it also gets in the way of multiplatform builds, which make the platform header files inaccessible to device drivers. To work around the header file problem, this patch changes the calling convention so the three mmp clock drivers get initialized with the base addresses as arguments from the platform code. It would still be useful to have a larger rework of the clock drivers, with DT integration to let the clocks actually be probed automatically, and the base addresses passed as DT properties. I am unsure if anyone is still interested in the mmp platform, so it is possible that this won't happen. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> 
The mmp clock drivers currently hardcode the physical addresses for
the clock registers. This is generally a bad idea, and it also gets in
the way of multiplatform builds, which make the platform header files
inaccessible to device drivers.

To work around the header file problem, this patch changes the calling
convention so the three mmp clock drivers get initialized with the base
addresses as arguments from the platform code.

It would still be useful to have a larger rework of the clock drivers,
with DT integration to let the clocks actually be probed automatically,
and the base addresses passed as DT properties. I am unsure if anyone
is still interested in the mmp platform, so it is possible that this
won't happen.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
clk: ti: omap5+: dpll: implement errata i810 2015-11-30T19:34:17+00:00 Tero Kristo t-kristo@ti.com 2015-11-30T14:43:25+00:00 07ff73a932b725b2a4675bd0cc1a86b4933e433e Errata i810 states that DPLL controller can get stuck while transitioning to a power saving state, while its M/N ratio is being re-programmed. As a workaround, before re-programming the M/N ratio, SW has to ensure the DPLL cannot start an idle state transition. SW can disable DPLL idling by setting the DPLL AUTO_DPLL_MODE=0 or keeping a clock request active by setting a dependent clock domain in SW_WKUP. This errata impacts OMAP5 and DRA7 chips, so enable the errata for these. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 
Errata i810 states that DPLL controller can get stuck while transitioning
to a power saving state, while its M/N ratio is being re-programmed.

As a workaround, before re-programming the M/N ratio, SW has to ensure
the DPLL cannot start an idle state transition. SW can disable DPLL
idling by setting the DPLL AUTO_DPLL_MODE=0 or keeping a clock request
active by setting a dependent clock domain in SW_WKUP.

This errata impacts OMAP5 and DRA7 chips, so enable the errata for these.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk: at91: add generated clock driver 2015-10-01T19:48:11+00:00 Nicolas Ferre nicolas.ferre@atmel.com 2015-07-31T09:43:12+00:00 df70aeef60839cb2732913fa41e61aba52ca942c Add a new type of clocks that can be provided to a peripheral. In addition to the peripheral clock, this new clock that can use several input clocks as parents can generate divided rates. This would allow a peripheral to have finer grained clocks for generating a baud rate, clocking an asynchronous part or having more options in frequency. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [sboyd@codeaurora.org: Transition to new clk_hw provider APIs] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 
Add a new type of clocks that can be provided to a peripheral.
In addition to the peripheral clock, this new clock that can use several
input clocks as parents can generate divided rates.
This would allow a peripheral to have finer grained clocks for generating
a baud rate, clocking an asynchronous part or having more
options in frequency.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[sboyd@codeaurora.org: Transition to new clk_hw provider APIs]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk: at91: add PMC sama5d2 support 2015-10-01T19:39:44+00:00 Nicolas Ferre nicolas.ferre@atmel.com 2015-06-18T12:43:29+00:00 a5752e57bb63154fe9202d8d2282bad3bae3bced Add support for the new sama5d2 SoC and adapt capabilities. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 
Add support for the new sama5d2 SoC and adapt capabilities.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk: at91: cleanup PMC header file for PCR register fields 2015-10-01T19:39:41+00:00 Nicolas Ferre nicolas.ferre@atmel.com 2015-06-17T12:40:38+00:00 96ef36e9c424b7a66413bb9229ef5afcddf4fef4 Add _MASK and _OFFSET values and cleanup register fields layout. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 
Add _MASK and _OFFSET values and cleanup register fields layout.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2015-09-01T20:00:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-09-01T20:00:04+00:00 102178108e2246cb4b329d3fb7872cd3d7120205 Pull ARM SoC driver updates from Olof Johansson: "Some releases this branch is nearly empty, others we have more stuff. It tends to gather drivers that need SoC modification or dependencies such that they have to (also) go in through our tree. For this release, we have merged in part of the reset controller tree (with handshake that the parts we have merged in will remain stable), as well as dependencies on a few clock branches. In general, new items here are: - Qualcomm driver for SMM/SMD, which is how they communicate with the coprocessors on (some) of their platforms - memory controller work for ARM's PL172 memory controller - reset drivers for various platforms - PMU power domain support for Marvell platforms - Tegra support for T132/T210 SoCs: PMC, fuse, memory controller per-SoC support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits) ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze() ARM: tegra: Disable cpuidle if PSCI is available soc/tegra: pmc: Use existing pclk reference soc/tegra: pmc: Remove unnecessary return statement soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile memory: tegra: Add Tegra210 support memory: tegra: Add support for a variable-size client ID bitfield clk: shmobile: rz: Add CPG/MSTP Clock Domain support clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support clk: shmobile: Add CPG/MSTP Clock Domain support ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets reset: reset-zynq: Adding support for Xilinx Zynq reset controller. docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings. MIPS: ath79: Add the reset controller to the AR9132 dtsi reset: Add a driver for the reset controller on the AR71XX/AR9XXX devicetree: Add bindings for the ATH79 reset controller reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property doc: dt: add documentation for lpc1850-rgu reset driver ... 
Pull ARM SoC driver updates from Olof Johansson:
 "Some releases this branch is nearly empty, others we have more stuff.
  It tends to gather drivers that need SoC modification or dependencies
  such that they have to (also) go in through our tree.

  For this release, we have merged in part of the reset controller tree
  (with handshake that the parts we have merged in will remain stable),
  as well as dependencies on a few clock branches.

  In general, new items here are:

   - Qualcomm driver for SMM/SMD, which is how they communicate with the
     coprocessors on (some) of their platforms

   - memory controller work for ARM's PL172 memory controller

   - reset drivers for various platforms

   - PMU power domain support for Marvell platforms

   - Tegra support for T132/T210 SoCs: PMC, fuse, memory controller
     per-SoC support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze()
  ARM: tegra: Disable cpuidle if PSCI is available
  soc/tegra: pmc: Use existing pclk reference
  soc/tegra: pmc: Remove unnecessary return statement
  soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile
  memory: tegra: Add Tegra210 support
  memory: tegra: Add support for a variable-size client ID bitfield
  clk: shmobile: rz: Add CPG/MSTP Clock Domain support
  clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support
  clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support
  clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support
  clk: shmobile: Add CPG/MSTP Clock Domain support
  ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets
  reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
  docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.
  MIPS: ath79: Add the reset controller to the AR9132 dtsi
  reset: Add a driver for the reset controller on the AR71XX/AR9XXX
  devicetree: Add bindings for the ATH79 reset controller
  reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
  doc: dt: add documentation for lpc1850-rgu reset driver
  ...
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2015-09-01T19:18:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-09-01T19:18:40+00:00 50686e8a3aed2f5d295e9d2e79ff43df461c7b76 Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ... 
Pull ARM SoC platform updates from Olof Johansson:
 "New or improved SoC support:

   - add support for Atmel's SAMA5D2 SoC
   - add support for Freescale i.MX6UL
   - improved support for TI's DM814x platform
   - misc fixes and improvements for RockChip platforms
   - Marvell MVEBU suspend/resume support

  A few driver changes that ideally would belong in the drivers branch
  are also here (acked by appropriate maintainers):

   - power key input driver for Freescale platforms (svns)
   - RTC driver updates for Freescale platforms (svns/mxc)
   - clk fixes for TI DM814/816X

  + a bunch of other changes for various platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: rockchip: pm: Fix PTR_ERR() argument
  ARM: imx: mach-imx6ul: Fix allmodconfig build
  clk: ti: fix for definition movement
  ARM: uniphier: drop v7_invalidate_l1 call at secondary entry
  memory: kill off set_irq_flags usage
  rtc: snvs: select option REGMAP_MMIO
  ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE
  ARM: BCM: Enable ARM erratum 798181 for BRCMSTB
  ARM: OMAP2+: Fix power domain operations regression caused by 81xx
  ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend
  ARM: rockchip: set correct stabilization thresholds in suspend
  ARM: rockchip: rename osc_switch_to_32k variable
  ARM: imx6ul: add fec MAC refrence clock and phy fixup init
  ARM: imx6ul: add fec bits to GPR syscon definition
  rtc: mxc: add support of device tree
  dt-binding: document the binding for mxc rtc
  rtc: mxc: use a second rtc clock
  ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback
  soc: mediatek: Fix SCPSYS compilation
  ARM: at91/soc: add basic support for new sama5d2 SoC
  ...