- Various clk rate range fixes - Drop clk rate range constraints on clk_put() (redux) * clk-rate-range: (28 commits) clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() clk: tests: Add some tests for orphan with multiple parents clk: tests: Add tests for mux with multiple parents clk: tests: Add tests for single parent mux ...
- More devm helpers for fixed rate registration - Add Spreadtrum UMS512 SoC clk support - Various PXA168 clk driver fixes * clk-fixed-rate: clk: fixed-rate: add devm_clk_hw_register_fixed_rate clk: asm9260: use parent index to link the reference clock * clk-spreadtrum: clk: sprd: Add clocks support for UMS512 * clk-pxa: clk: pxa: add a check for the return value of kzalloc() clk: mmp: pxa168: control shared SDH bits with separate clock dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks clk: mmp: pxa168: add clocks for SDH2 and SDH3 dt-bindings: marvell,pxa168: add clock id for SDH3 clk: mmp: pxa168: fix GPIO clock enable bits clk: mmp: pxa168: add muxes for more peripherals clk: mmp: pxa168: fix incorrect parent clocks clk: mmp: pxa168: fix const-correctness clk: mmp: pxa168: add new clocks for peripherals dt-bindings: marvell,pxa168: add clock ids for additional dividers clk: mmp: pxa168: fix incorrect dividers clk: mmp: pxa168: add additional register defines * clk-ti: clk: davinci: cfgchip: Use dev_err_probe() helper clk: davinci: pll: fix spelling typo in comment MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
- Add resets for MediaTek MT8195 PCIe and USB - Remove DaVinci DM644x and DM646x clk driver support * clk-samsung: clk: samsung: MAINTAINERS: add Krzysztof Kozlowski clk: samsung: exynos850: Implement CMU_MFCMSCL domain clk: samsung: exynos850: Implement CMU_IS domain clk: samsung: exynos850: Implement CMU_AUD domain clk: samsung: exynos850: Style fixes clk: samsung: exynosautov9: add fsys1 clock support clk: samsung: exynosautov9: add fsys0 clock support clk: samsung: exynosautov9: correct register offsets of peric0/c1 clk: samsung: exynosautov9: add missing gate clks for peric0/c1 dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL dt-bindings: clock: exynos850: Add Exynos850 CMU_IS dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1 dt-bindings: clock: exynosautov9: add fsys1 clock definitions dt-bindings: clock: exynosautov9: add fys0 clock definitions clk: samsung: exynos7885: Add TREX clocks clk: samsung: exynos7885: Implement CMU_FSYS domain dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1 clk: samsung: exynos-clkout: Use of_device_get_match_data() * clk-mtk: (42 commits) clk: mediatek: add driver for MT8365 SoC clk: mediatek: Export required common code symbols clk: mediatek: Provide mtk_devm_alloc_clk_data dt-bindings: clock: mediatek: add bindings for MT8365 SoC clk: mediatek: mt8192: deduplicate parent clock lists clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*() clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes clk: mediatek: mt8183: Add clk mux notifier for MFG mux clk: mediatek: mux: add clk notifier functions clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe clk: mediatek: gate: Export mtk_clk_register_gates_with_dev clk: mediatek: add VDOSYS1 clock dt-bindings: clk: mediatek: Add MT8195 DPI clocks ... * clk-rm: clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x * clk-ast: clk: ast2600: BCLK comes from EPLL * clk-qcom: (97 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8939: use parent_hws where possible dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc8280xp: use retention for USB power domains clk: qcom: gdsc: add missing error handling dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos clk: qcom: Add global clock controller driver for SM6375 dt-bindings: clock: add SM6375 QCOM global clock bindings clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc clk: qcom: gdsc: Fix the handling of PWRSTS_RET support clk: qcom: Add SC8280XP GPU clock controller dt-bindings: clock: Add Qualcomm SC8280XP GPU binding clk: qcom: smd: Add SM6375 clocks ...
Introduce (devm_)hw_register_mux_parent_data_table new API. We have basic support for clk_register_mux using parent_data but we lack any API to provide a custom parent_map. Add these 2 new API to correctly handle these special configuration instead of using the generic __(devm_)clk_hw_register_mux API. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220914144743.17369-1-ansuelsmth@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For the entire history of the devm_of_clk_del_provider) existence (since 2017) it was never used. Remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220623115719.52683-1-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add devm_clk_hw_register_fixed_rate(), devres-managed helper to register fixed-rate clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220916061740.87167-3-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Rewrite clk-asm9260 to use parent index to use the reference clock. During this rework two helpers are added: - clk_hw_register_mux_table_parent_data() to supplement clk_hw_register_mux_table() but using parent_data instead of parent_names - clk_hw_register_fixed_rate_parent_accuracy() to be used instead of directly calling __clk_hw_register_fixed_rate(). The later function is an internal API, which is better not to be called directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220916061740.87167-2-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some clock providers are hand-crafting their clk_rate_request, and need to figure out the current boundaries of their clk_hw to fill it properly. Let's create such a function for clock providers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-24-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk-divider instantiates clk_rate_request internally for its round_rate implementations to share the code with its determine_rate implementations. However, it's missing a few fields (min_rate, max_rate) that would be initialized properly if it was using clk_core_init_rate_req(). Let's create the clk_hw_init_rate_request() function for clock providers to be able to share the code to instation clk_rate_requests with the framework. This will also be useful for some tests introduced in later patches. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-17-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>