linux.git/include/linux/blkdev.h, branch v4.3-rc1

blk: rq_data_dir() should not return a boolean

2015-09-12T19:03:30+00:00

rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
a boolean value.

Now, admittedly the "!= 0" doesn't really change the value (0 stays as
zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
causes gcc to warn about the construct

    switch (rq_data_dir(req)) {
        case READ:
            ...
        case WRITE:
            ...

that we have in a few drivers.

Now, the gcc warning is silly and stupid (it seems to warn not about the
switch value having a different type from the case statements, but about
_any_ boolean switch value), but in this case the code itself is silly
and stupid too, so let's just change it, and get rid of warnings like
this:

  drivers/block/hd.c: In function ‘hd_request’:
  drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
     switch (rq_data_dir(req)) {

The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
commit 5953316dbf90 ("block: make rq->cmd_flags be 64-bit") and is
presumably because the old code (that just did a logical 'and' with 1)
would then end up making the type of rq_data_dir() be u64 too.

But if we want to retain the old regular integer type, let's just cast
the result to 'int' rather than use that rather odd '!= 0'.

Signed-off-by: Linus Torvalds

Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2015-09-08T21:35:59+00:00

Pull libnvdimm updates from Dan Williams:
 "This update has successfully completed a 0day-kbuild run and has
  appeared in a linux-next release.  The changes outside of the typical
  drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
  removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
  the introduction of ZONE_DEVICE + devm_memremap_pages().

  Summary:

   - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
     mechanism for adding device-driver-discovered memory regions to the
     kernel's direct map.

     This facility is used by the pmem driver to enable pfn_to_page()
     operations on the page frames returned by DAX ('direct_access' in
     'struct block_device_operations').

     For now, the 'memmap' allocation for these "device" pages comes
     from "System RAM".  Support for allocating the memmap from device
     memory will arrive in a later kernel.

   - Introduce memremap() to replace usages of ioremap_cache() and
     ioremap_wt().  memremap() drops the __iomem annotation for these
     mappings to memory that do not have i/o side effects.  The
     replacement of ioremap_cache() with memremap() is limited to the
     pmem driver to ease merging the api change in v4.3.

     Completion of the conversion is targeted for v4.4.

   - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
     driver, update the VFS DAX implementation and PMEM api to provide
     persistence guarantees for kernel operations on a DAX mapping.

   - Convert the ACPI NFIT 'BLK' driver to map the block apertures as
     cacheable to improve performance.

   - Miscellaneous updates and fixes to libnvdimm including support for
     issuing "address range scrub" commands, clarifying the optimal
     'sector size' of pmem devices, a clarification of the usage of the
     ACPI '_STA' (status) property for DIMM devices, and other minor
     fixes"

* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
  libnvdimm, pmem: direct map legacy pmem by default
  libnvdimm, pmem: 'struct page' for pmem
  libnvdimm, pfn: 'struct page' provider infrastructure
  x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
  add devm_memremap_pages
  mm: ZONE_DEVICE for "device memory"
  mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
  dax: drop size parameter to ->direct_access()
  nd_blk: change aperture mapping from WC to WB
  nvdimm: change to use generic kvfree()
  pmem, dax: have direct_access use __pmem annotation
  dax: update I/O path to do proper PMEM flushing
  pmem: add copy_from_iter_pmem() and clear_pmem()
  pmem, x86: clean up conditional pmem includes
  pmem: remove layer when calling arch_has_wmb_pmem()
  pmem, x86: move x86 PMEM API to new pmem.h header
  libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
  pmem: switch to devm_ allocations
  devres: add devm_memremap
  libnvdimm, btt: write and validate parent_uuid
  ...

dax: drop size parameter to ->direct_access()

2015-08-27T23:40:58+00:00

None of the implementations currently use it.  The common
bdev_direct_access() entry point handles all the size checks before
calling ->direct_access().

Signed-off-by: Christoph Hellwig 
Signed-off-by: Dan Williams

pmem, dax: have direct_access use __pmem annotation

2015-08-20T18:07:24+00:00

Update the annotation for the kaddr pointer returned by direct_access()
so that it is a __pmem pointer.  This is consistent with the PMEM driver
and with how this direct_access() pointer is used in the DAX code.

Signed-off-by: Ross Zwisler 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Dan Williams

block: Replace SG_GAPS with new queue limits mask

2015-08-19T21:26:02+00:00

The SG_GAPS queue flag caused checks for bio vector alignment against
PAGE_SIZE, but the device may have different constraints. This patch
adds a queue limits so a driver with such constraints can set to allow
requests that would have been unnecessarily split. The new gaps check
takes the request_queue as a parameter to simplify the logic around
invoking this function.

This new limit makes the queue flag redundant, so removing it and
all usage. Device-mappers will inherit the correct settings through
blk_stack_limits().

Signed-off-by: Keith Busch 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: bump BLK_DEF_MAX_SECTORS to 2560

2015-08-18T20:21:15+00:00

A value of 2560 (1280k) will accommodate a 10-data-disk stripe
write with chunk size 128k.  In the testing I've done using
iozone, fio, and aio-stress across a number of different storage
devices, a value of 1280 does not show a big performance
difference from 512, but will hopefully help software RAID
setups using SATA disks, as reported by Christoph.

NOTE: drivers/block/aoe/aoeblk.c sets its own max_hw_sectors_kb to
BLK_DEF_MAX_SECTORS.  So, this patch essentially changes aeoblk to
Use a larger maximum sector size, and I did not test this.

Signed-off-by: Jeff Moyer 
Signed-off-by: Jens Axboe

Revert "block: remove artifical max_hw_sectors cap"

2015-08-18T20:21:13+00:00

This reverts commit 34b48db66e08ca1c1bc07cf305d672ac940268dc.
That commit caused performance regressions for streaming I/O
workloads on a number of different storage devices, from
SATA disks to external RAID arrays.  It also managed to
trip up some buggy firmware in at least one drive, causing
data corruption.

The next patch will bump the default max_sectors_kb value to
1280, which will accommodate a 10-data-disk stripe write
with chunk size 128k.  In the testing I've done using iozone,
fio, and aio-stress, a value of 1280 does not show a big
performance difference from 512.  This will hopefully still
help the software RAID setup that Christoph saw the original
performance gains with while still not regressing other
storage configurations.

Signed-off-by: Jeff Moyer 
Signed-off-by: Jens Axboe

block: kill merge_bvec_fn() completely

2015-08-13T18:31:57+00:00

As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.

Cc: Jens Axboe 
Cc: Lars Ellenberg 
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina 
Cc: Yehuda Sadeh 
Cc: Sage Weil 
Cc: Alex Elder 
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon 
Cc: Mike Snitzer 
Cc: dm-devel@redhat.com
Cc: Neil Brown 
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig 
Cc: "Martin K. Petersen" 
Acked-by: NeilBrown  (for the 'md' bits)
Acked-by: Mike Snitzer 
Signed-off-by: Kent Overstreet 
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
 dm-era-target, and resolve merge conflicts]
Signed-off-by: Dongsu Park 
Signed-off-by: Ming Lin 
Signed-off-by: Jens Axboe

block: make generic_make_request handle arbitrarily sized bios

2015-08-13T18:31:33+00:00

The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.

But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them.  In the future this will
let us delete merge_bvec_fn and a bunch of other code.

We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.

Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:

 * nfhd_make_request (arch/m68k/emu/nfblock.c)
 * axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
 * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
 * brd_make_request (ramdisk - drivers/block/brd.c)
 * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
 * loop_make_request
 * null_queue_bio
 * bcache's make_request fns

Some others are almost certainly safe to remove now, but will be left
for future patches.

Cc: Jens Axboe 
Cc: Christoph Hellwig 
Cc: Al Viro 
Cc: Ming Lei 
Cc: Neil Brown 
Cc: Alasdair Kergon 
Cc: Mike Snitzer 
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg 
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina 
Cc: Geoff Levand 
Cc: Jim Paris 
Cc: Philip Kelleher 
Cc: Minchan Kim 
Cc: Nitin Gupta 
Cc: Oleg Drokin 
Cc: Andreas Dilger 
Acked-by: NeilBrown  (for the 'md/md.c' bits)
Acked-by: Mike Snitzer 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Kent Overstreet 
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: Dongsu Park 
Signed-off-by: Ming Lin 
Signed-off-by: Jens Axboe

block: make /sys/block//queue/discard_max_bytes writeable

2015-07-17T14:41:53+00:00

Lots of devices support huge discard sizes these days. Depending
on how the device handles them internally, huge discards can
introduce massive latencies (hundreds of msec) on the device side.

We have a sysfs file, discard_max_bytes, that advertises the max
hardware supported discard size. Make this writeable, and split
the settings into a soft and hard limit. This can be set from
'discard_granularity' and up to the hardware limit.

Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw
set limit.

Reviewed-by: Jeff Moyer 
Signed-off-by: Jens Axboe