linux.git/include/linux/bcma/bcma.h, branch v4.7-rc4

phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar

2016-04-30T14:42:28+00:00

Northstar is a family of SoCs used in home routers. They have USB 2.0
and 3.0 controllers with PHYs that need to be properly initialized.
This driver provides PHY init support in a generic way and can be bound
with an EHCI controller driver.
There are (just a few) registers being defined in bcma header. It's
because DMU/CRU registers will be also needed in other drivers. We will
need them e.g. in PCIe controller/PHY driver and at some point probably
in clock driver for BCM53573 chipset. By using include/linux/bcma/ we
avoid code duplication.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kishon Vijay Abraham I

bcma: add support for BCM47094

2016-02-06T11:46:59+00:00

It's another SoC with 32 GPIOs and simplified watchdog handling. It was
tested on D-Link DIR-885L.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: identify bus cores (devices) found on BCM47189

2016-02-06T11:34:50+00:00

Add missing defines and print proper names.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

brcmfmac: Add support for the BCM4365 and BCM4366 PCIE devices.

2015-09-29T07:56:05+00:00

This patch adds support for the BCM4365 and BCM4366 11ac Wave2
PCIE devices.

Reviewed-by: Arend Van Spriel 
Reviewed-by: Pieter-Paul Giesberts 
Signed-off-by: Hante Meuleman 
Signed-off-by: Arend van Spriel 
Signed-off-by: Kalle Valo

bcma: add module_bcma_driver()

2015-05-26T11:03:45+00:00

This makes it possible to save some lines of code in drivers with an
simple bcma driver registration.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: Kalle Valo

bcma: move PCI IRQ control function to host specific code

2015-03-13T14:25:50+00:00

This function isn't really related to any bus core. It touches PCI
device config registers only, so move it to the (PCI) host file.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: make bcma_host_pci_(up|down) calls safe for every config

2015-03-05T12:11:40+00:00

We were providing declarations but actual code was compiled only with
CONFIG_BCMA_HOST_PCI set. This could result in:
ERROR: "bcma_host_pci_down" [drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko] undefined!
ERROR: "bcma_host_pci_up" [drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko] undefined!
ERROR: "bcma_host_pci_down" [drivers/net/wireless/b43/b43.ko] undefined!
ERROR: "bcma_host_pci_up" [drivers/net/wireless/b43/b43.ko] undefined!

Reported-by: Arnd Bergmann 
Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: add helpers bringing PCIe hosted bus up / down

2015-03-02T14:59:45+00:00

Bringing PCIe hosted bus up requires operating on host-related core.
Since we plan to support PCIe Gen 2 devices we should provide a helper
picking the correct one (PCIE or PCIE2).

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: implement host code support for PCIe Gen 2 devices

2015-01-29T08:54:43+00:00

This is stil incomplete, so we don't add PCI IDs of new devices yet.
Purpose of this patch is to allow testing & adjusting rest of the code.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: make it possible to specify a IRQ num in bcma_core_irq()

2014-11-11T21:31:11+00:00

This moves bcma_core_irq() to main.c and add a extra parameter with a
number so that we can return different irq number for devices with more
than one.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville