Pull more ACPI updates from Rafael Wysocki:
 "This includes a couple of fixes needed after recent changes, two ACPI
  driver fixes (fan and "Processor Aggregator"), an update of the ACPI
  device properties handling code and a new MAINTAINERS entry for ACPI
  on ARM64.

  Specifics:

   - Fix an unused function warning that started to appear after recent
     changes in the ACPI EC driver (Eric Biggers).

   - Fix the KERN_CONT usage in acpi_os_vprintf() that has become
     (particularly) annoying recently (Joe Perches).

   - Fix the fan status checking in the ACPI fan driver to avoid
     returning incorrect error codes sometimes (Srinivas Pandruvada).

   - Fix the ACPI Processor Aggregator driver (PAD) to always let the
     special processor_aggregator driver from Xen take over when running
     as Xen dom0 (Juergen Gross).

   - Update the handling of reference device properties in ACPI by
     allowing empty rows ("holes") to appear in reference property lists
     (Mika Westerberg).

   - Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi)"

* tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT
  ACPI / PAD: don't register acpi_pad driver if running as Xen dom0
  ACPI / property: Allow holes in reference properties
  MAINTAINERS: Add ARM64-specific ACPI maintainers entry
  ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n
  ACPI / fan: Fix error reading cur_state

* device-properties:
  ACPI / property: Allow holes in reference properties

* acpi-misc:
  MAINTAINERS: Add ARM64-specific ACPI maintainers entry

DT allows holes or empty phandles for references. This is used for example
in SPI subsystem where some chip selects are native and others are regular
GPIOs. In ACPI _DSD we currently do not support this but instead the
preceding reference consumes all following integer arguments.

For example we would like to support something like the below ASL fragment
for SPI:

  Package () {
      "cs-gpios",
      Package () {
          ^GPIO, 19, 0, 0, // GPIO CS0
          0,               // Native CS
          ^GPIO, 20, 0, 0, // GPIO CS1
      }
  }

The zero in the middle means "no entry" or NULL reference. To support this
we change acpi_data_get_property_reference() to take firmware node and
num_args as argument and rename it to __acpi_node_get_property_reference().
The function returns -ENOENT if the given index resolves to "no entry"
reference and -ENODATA when there are no more entries in the property.

We then add static inline wrapper acpi_node_get_property_reference() that
passes MAX_ACPI_REFERENCE_ARGS as num_args to support the existing
behaviour which some drivers have been relying on.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull tty and serial updates from Greg KH:
 "Here is the big tty and serial patch set for 4.9-rc1.

  It also includes some drivers/dma/ changes, as those were needed by
  some serial drivers, and they were all acked by the DMA maintainer.

  Also in here is the long-suffering ACPI SPCR patchset, which was
  passed around from maintainer to maintainer like a hot-potato. Seems I
  was the sucker^Wlucky one. All of those patches have been acked by the
  various subsystem maintainers as well.

  All of this has been in linux-next with no reported issues"

* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
  Revert "serial: pl011: add console matching function"
  MAINTAINERS: update entry for atmel_serial driver
  serial: pl011: add console matching function
  ARM64: ACPI: enable ACPI_SPCR_TABLE
  ACPI: parse SPCR and enable matching console
  of/serial: move earlycon early_param handling to serial
  Revert "drivers/tty: Explicitly pass current to show_stack"
  tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
  nios2: dts: 10m50: Add tx-threshold parameter
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  serial: 8250: of: Load TX FIFO Threshold from DT
  Documentation: dt: serial: Add TX FIFO threshold parameter
  drivers/tty: Explicitly pass current to show_stack
  serial: imx: Fix DCD reading
  serial: stm32: mark symbols static where possible
  serial: xuartps: Add some register initialisation to cdns_early_console_setup()
  serial: xuartps: Removed unwanted checks while reading the error conditions
  serial: xuartps: Rewrite the interrupt handling logic
  serial: stm32: use mapbase instead of membase for DMA
  tty/serial: atmel: fix fractional baud rate computation
  ...

Pull x86 apic updates from Ingo Molnar:
 "The main changes are:

   - Persistent CPU/node numbering across CPU hotplug/unplug events.
     This is a pretty involved series of changes that first fetches all
     the information during bootup and then uses it for the various
     hotplug/unplug methods. (Gu Zheng, Dou Liyang)

   - IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)

   - ... various fixes, cleanups and enhancements"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
  acpi: Fix broken error check in map_processor()
  acpi: Validate processor id when mapping the processor
  acpi: Provide mechanism to validate processors in the ACPI tables
  x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
  x86/acpi: Enable MADT APIs to return disabled apicids
  x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
  x86/acpi: Enable acpi to register all possible cpus at boot time
  x86/numa: Online memory-less nodes at boot time
  x86/apic: Get rid of apic_version[] array
  x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
  x86/ioapic: Ignore root bridges without a companion ACPI device
  x86/apic: Update comment about disabling processor focus
  x86/smpboot: Check APIC ID before setting up default routing
  x86/ioapic: Fix IOAPIC failing to request resource
  x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
  x86/ioapic: Fix setup_res() failing to get resource
  x86/ioapic: Support hot-removal of IOAPICs present during boot
  x86/ioapic: Change prototype of acpi_ioapic_add()
  x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
  ...

* acpi-wdat:
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / watchdog: Add support for WDAT hardware watchdog

* acpi-ec:
  ACPI / EC: Fix issues related to boot_ec
  ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
  ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
  ACPI / EC: Cleanup first_ec/boot_ec code
  ACPI / EC: Enable event freeze mode to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for resume process
  ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
  ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
  ACPI / EC: Add PM operations for suspend/resume noirq stage

* acpi-bus:
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPI / bus: Make acpi_get_first_physical_node() public

'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port
Console Redirection Table) [2] as a mandatory ACPI table that
specifies the configuration of serial console.

Defer initialization of DT earlycon until ACPI/DT decision is made.

Parse the ACPI SPCR table, setup earlycon if required,
enable specified console.

Thanks to Peter Hurley for explaining how this should work.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
[2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx

Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bring in the upstream modifications so we can fixup the silent merge
conflict which is introduced by this merge.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Starting from Intel Skylake the iTCO watchdog timer registers were moved to
reside in the same register space with SMBus host controller.  Not all
needed registers are available though and we need to unhide P2SB (Primary
to Sideband) device briefly to be able to read status of required NO_REBOOT
bit. The i2c-i801.c SMBus driver used to handle this and creation of the
iTCO watchdog platform device.

Windows, on the other hand, does not use the iTCO watchdog hardware
directly even if it is available. Instead it relies on ACPI Watchdog Action
Table (WDAT) table to describe the watchdog hardware to the OS. This table
contains necessary information about the the hardware and also set of
actions which are executed by a driver as needed.

This patch implements a new watchdog driver that takes advantage of the
ACPI WDAT table. We split the functionality into two parts: first part
enumerates the WDAT table and if found, populates resources and creates
platform device for the actual driver. The second part is the driver
itself.

The reason for the split is that this way we can make the driver itself to
be a module and loaded automatically if the WDAT table is found. Otherwise
the module is not loaded.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>