linux.git/include/dt-bindings, branch v5.15-rc2 Linux kernel source tree Merge tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog 2021-09-07T20:52:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-07T20:52:46+00:00 4c00e1e2e58eefb288ba9ef585b6f19e1f33bf1e Pull watchdog updates from Wim Van Sebroeck: - add Mediatek MT7986 & MT8195 wdt support - add Maxim MAX63xx - drop bd70528 support - rewrite ixp4xx to watchdog framework - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and tqmx86 - introduce watchdog_dev_suspend/resume - several fixes and improvements * tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: Add compatible for Mediatek MT7986 watchdog: ixp4xx: Rewrite driver to use core watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate watchdog: max63xx_wdt: Add device tree probing dt-bindings: watchdog: Add Maxim MAX63xx bindings watchdog: mediatek: mt8195: add wdt support dt-bindings: reset: mt8195: add toprgu reset-controller header file watchdog: tqmx86: Constify static struct watchdog_ops watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops watchdog: sl28cpld_wdt: Constify static struct watchdog_ops watchdog: iTCO_wdt: Fix detection of SMI-off case watchdog: bcm2835_wdt: consider system-power-controller property watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend watchdog: introduce watchdog_dev_suspend/resume watchdog: Fix NULL pointer dereference when releasing cdev watchdog: only run driver set_pretimeout op if device supports it watchdog: bd70528 drop bd70528 support 
Pull watchdog updates from Wim Van Sebroeck:

 - add Mediatek MT7986 & MT8195 wdt support

 - add Maxim MAX63xx

 - drop bd70528 support

 - rewrite ixp4xx to watchdog framework

 - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and
   tqmx86

 - introduce watchdog_dev_suspend/resume

 - several fixes and improvements

* tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: Add compatible for Mediatek MT7986
  watchdog: ixp4xx: Rewrite driver to use core
  watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate
  watchdog: max63xx_wdt: Add device tree probing
  dt-bindings: watchdog: Add Maxim MAX63xx bindings
  watchdog: mediatek: mt8195: add wdt support
  dt-bindings: reset: mt8195: add toprgu reset-controller header file
  watchdog: tqmx86: Constify static struct watchdog_ops
  watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops
  watchdog: sl28cpld_wdt: Constify static struct watchdog_ops
  watchdog: iTCO_wdt: Fix detection of SMI-off case
  watchdog: bcm2835_wdt: consider system-power-controller property
  watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend
  watchdog: introduce watchdog_dev_suspend/resume
  watchdog: Fix NULL pointer dereference when releasing cdev
  watchdog: only run driver set_pretimeout op if device supports it
  watchdog: bd70528 drop bd70528 support
Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2021-09-02T21:22:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-02T21:22:56+00:00 c793011242d182e5f12800c12dbaf37af80be735 Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ... 
Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.15 kernel cycle, no
  core changes at all this time, just driver work!

  New drivers:

   - New subdriver for Intel Keem Bay (an ARM-based SoC)

   - New subdriver for Qualcomm MDM9607 and SM6115

   - New subdriver for ST Microelectronics STM32MP135

   - New subdriver for Freescale i.MX8ULP ("Ultra Low Power")

   - New subdriver for Ingenic X2100

   - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO

   - Support Samsung Exynos850

   - Support Renesas RZ/G2L

  Enhancements:

   - A major refactoring of the Rockchip driver, breaking part of it out
     to a separate GPIO driver in drivers/gpio

   - Pin bias support on Renesas r8a77995

   - Add SCI pins support to Ingenic JZ4755 and JZ4760

   - Mediatek device tree bindings converted to YAML"

* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
  pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
  pinctrl: samsung: Add Exynos850 SoC specific data
  dt-bindings: pinctrl: samsung: Add Exynos850 doc
  MAINTAINERS: Add maintainers for amd-pinctrl driver
  pinctrl: Add Intel Keem Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
  pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
  dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
  dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
  dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
  dt-bindings: mediatek: convert pinctrl to yaml
  arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
  arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
  pinctrl: ingenic: Add .max_register in regmap_config
  pinctrl: ingenic: Fix bias config for X2000(E)
  pinctrl: ingenic: Fix incorrect pull up/down info
  pinctrl: Ingenic: Add pinctrl driver for X2100.
  dt-bindings: pinctrl: Add bindings for Ingenic X2100.
  pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
  pinctrl: Ingenic: Improve the code.
  ...
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2021-09-02T21:17:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-02T21:17:24+00:00 75d6e7d9ced83e937757e278c3ce1ccd6606a96a Pull clk updates from Stephen Boyd: "Nothing changed in the clk framework core this time around. We did get some updates to the basic clk types to use determine_rate for the divider type and add a power of two fractional divider flag though. Otherwise, this is a collection of clk driver updates. More than half the diffstat is in the Qualcomm clk driver where we add a bunch of data to describe clks on various SoCs and fix bugs. The other big new thing in here is the Mediatek MT8192 clk driver. That's been under review for a while and it's nice to see that it's finally upstream. Beyond that it's the usual set of minor fixes and tweaks to clk drivers. There are some non-clk driver bits in here which have all been acked by the respective maintainers. New Drivers: - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs - Add display (DU and DSI) clocks on Renesas R-Car V3U - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and resets on Renesas RZ/G2L Updates: - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators - Add power of two flag to fractional divider clk type - Migrate some clk drivers to clk_divider_ops.determine_rate - Migrate to clk_parent_data in gcc-sdm660 - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2 - Switch from .round_rate to .determine_rate in clk-divider-gate - Fix clock tree update for TF-A controlled clocks for all i.MX8M - Add missing M7 core clock for i.MX8MN - YAML conversion of rk3399 clock controller binding - Removal of GRF dependency for the rk3328/rk3036 pll types - Drop CLK_IS_CRITICAL flag from Tegra fuse clk - Make CLK_R9A06G032 Kconfig symbol invisible - Convert various DT bindings to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) dt-bindings: clock: samsung: fix header path in example clk: tegra: fix old-style declaration clk: qcom: Add SM6350 GCC driver MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: clk-generated: Limit the requested rate to our range clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type ... 
Pull clk updates from Stephen Boyd:
 "Nothing changed in the clk framework core this time around. We did get
  some updates to the basic clk types to use determine_rate for the
  divider type and add a power of two fractional divider flag though.

  Otherwise, this is a collection of clk driver updates. More than half
  the diffstat is in the Qualcomm clk driver where we add a bunch of
  data to describe clks on various SoCs and fix bugs. The other big new
  thing in here is the Mediatek MT8192 clk driver. That's been under
  review for a while and it's nice to see that it's finally upstream.

  Beyond that it's the usual set of minor fixes and tweaks to clk
  drivers. There are some non-clk driver bits in here which have all
  been acked by the respective maintainers.

  New Drivers:
   - Support video, gpu, display clks on qcom sc7280 SoCs
   - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
   - Multimedia clks (MMCC) on qcom MSM8994/MSM8992
   - RPMh clks on qcom SM6350 SoCs
   - Support for Mediatek MT8192 SoCs
   - Add display (DU and DSI) clocks on Renesas R-Car V3U
   - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
     resets on Renesas RZ/G2L

  Updates:
   - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
   - Add power of two flag to fractional divider clk type
   - Migrate some clk drivers to clk_divider_ops.determine_rate
   - Migrate to clk_parent_data in gcc-sdm660
   - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
   - Switch from .round_rate to .determine_rate in clk-divider-gate
   - Fix clock tree update for TF-A controlled clocks for all i.MX8M
   - Add missing M7 core clock for i.MX8MN
   - YAML conversion of rk3399 clock controller binding
   - Removal of GRF dependency for the rk3328/rk3036 pll types
   - Drop CLK_IS_CRITICAL flag from Tegra fuse clk
   - Make CLK_R9A06G032 Kconfig symbol invisible
   - Convert various DT bindings to YAML"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
  dt-bindings: clock: samsung: fix header path in example
  clk: tegra: fix old-style declaration
  clk: qcom: Add SM6350 GCC driver
  MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
  dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos4 to dtschema
  dt-bindings: clock: samsung: convert Exynos3250 to dtschema
  dt-bindings: clock: samsung: convert Exynos542x to dtschema
  dt-bindings: clock: samsung: add bindings for Exynos external clock
  dt-bindings: clock: samsung: convert Exynos5250 to dtschema
  clk: vc5: Add properties for configuring SD/OE behavior
  clk: vc5: Use dev_err_probe
  dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
  dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
  clk: zynqmp: Fix kernel-doc format
  clk: at91: clk-generated: Limit the requested rate to our range
  clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
  clk: zynqmp: Fix a memory leak
  clk: zynqmp: Check the return type
  ...
Merge tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration 2021-09-02T21:12:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-02T21:12:24+00:00 a180eab0b564a9dc149beb0517136ef7129f1260 Pull mailbox updates from Jassi Brar: - mtk: - added support for mt8192 and mt8195 - minor fix regarding address shift - qcom: - added compatibles for MSM8953, SM6350 and SM6115 - enable loading IPCC as a module - misc: - change Altera maintainer - fix sti kernel-doc warnings * tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: cmdq: add multi-gce clocks support for mt8195 mailbox: cmdq: add mediatek mailbox support for mt8195 dt-bindings: gce: add gce header file for mt8195 dt-bindings: mailbox: add definition for mt8195 mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC dt-bindings: mailbox: Add compatible for the MSM8953 dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350 mailbox: qcom: Add support for SM6115 APCS IPC dt-bindings: mailbox: qcom: Add SM6115 APCS compatible soc: mediatek: cmdq: add address shift in jump mailbox: cmdq: add mt8192 support dt-binding: gce: add gce header file for mt8192 MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module mailbox: sti: quieten kernel-doc warnings 
Pull mailbox updates from Jassi Brar:

 - mtk:
     - added support for mt8192 and mt8195
     - minor fix regarding address shift

 - qcom:
     - added compatibles for MSM8953, SM6350 and SM6115
     - enable loading IPCC as a module

 - misc:
     - change Altera maintainer
     - fix sti kernel-doc warnings

* tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: cmdq: add multi-gce clocks support for mt8195
  mailbox: cmdq: add mediatek mailbox support for mt8195
  dt-bindings: gce: add gce header file for mt8195
  dt-bindings: mailbox: add definition for mt8195
  mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC
  dt-bindings: mailbox: Add compatible for the MSM8953
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350
  mailbox: qcom: Add support for SM6115 APCS IPC
  dt-bindings: mailbox: qcom: Add SM6115 APCS compatible
  soc: mediatek: cmdq: add address shift in jump
  mailbox: cmdq: add mt8192 support
  dt-binding: gce: add gce header file for mt8192
  MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer
  mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module
  mailbox: sti: quieten kernel-doc warnings
Merge tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2021-09-02T01:34:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-02T01:34:51+00:00 9e5f3ffcf1cb34e7c7beb3f79a96f58536730924 Pull devicetree updates from Rob Herring: - Refactor arch kdump DT related code to a common implementation - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight', 'resets', and 'pwm' properties - Various clean-ups to DT FDT code - Fix a runtime error for !CONFIG_SYSFS - Convert Synopsys DW PCI and derivative binding docs to schemas. Add Toshiba Visconti PCIe binding. - Convert a bunch of memory controller bindings to schemas - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards, brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema. - Extend nvmem bindings to handle bit offsets in unit-addresses - Add DT schemas for HiKey 970 PCIe PHY - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings - Enable dtc pci_device_reg warning by default - Fixes for handling 'unevaluatedProperties' in preparation to enable pending support in the tooling for jsonschema 2020-12 draft * tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) dt-bindings: display: remove zte,vou.txt binding doc dt-bindings: hwmon: merge max1619 into trivial devices dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries dt-bindings: Add vendor prefix for Topic Embedded Systems of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr() arm64: kdump: Remove custom linux,usable-memory-range handling arm64: kdump: Remove custom linux,elfcorehdr handling riscv: Remove non-standard linux,elfcorehdr handling of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef of: fdt: Add generic support for handling usable memory range property of: fdt: Add generic support for handling elf core headers property crash_dump: Make elfcorehdr address/size symbols always visible dt-bindings: memory: convert Samsung Exynos DMC to dtschema dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema kbuild: Enable dtc 'pci_device_reg' warning by default dt-bindings: soc: remove obsolete zte zx header dt-bindings: clock: remove obsolete zte zx header ... 
Pull devicetree updates from Rob Herring:

 - Refactor arch kdump DT related code to a common implementation

 - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight',
   'resets', and 'pwm' properties

 - Various clean-ups to DT FDT code

 - Fix a runtime error for !CONFIG_SYSFS

 - Convert Synopsys DW PCI and derivative binding docs to schemas. Add
   Toshiba Visconti PCIe binding.

 - Convert a bunch of memory controller bindings to schemas

 - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ
   combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq
   MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards,
   brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema.

 - Extend nvmem bindings to handle bit offsets in unit-addresses

 - Add DT schemas for HiKey 970 PCIe PHY

 - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings

 - Enable dtc pci_device_reg warning by default

 - Fixes for handling 'unevaluatedProperties' in preparation to enable
   pending support in the tooling for jsonschema 2020-12 draft

* tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  dt-bindings: display: remove zte,vou.txt binding doc
  dt-bindings: hwmon: merge max1619 into trivial devices
  dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible
  dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
  dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
  dt-bindings: Add vendor prefix for Topic Embedded Systems
  of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr()
  arm64: kdump: Remove custom linux,usable-memory-range handling
  arm64: kdump: Remove custom linux,elfcorehdr handling
  riscv: Remove non-standard linux,elfcorehdr handling
  of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef
  of: fdt: Add generic support for handling usable memory range property
  of: fdt: Add generic support for handling elf core headers property
  crash_dump: Make elfcorehdr address/size symbols always visible
  dt-bindings: memory: convert Samsung Exynos DMC to dtschema
  dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema
  dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema
  kbuild: Enable dtc 'pci_device_reg' warning by default
  dt-bindings: soc: remove obsolete zte zx header
  dt-bindings: clock: remove obsolete zte zx header
  ...
Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2021-09-01T22:39:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-01T22:39:09+00:00 7c636d4d20f8c5acfbfbc60f326fddb0e1cf5daa Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ... 
Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, the bulk of work in the SoC tree goes into DT files, this
  time with a roughly even split between 32-bit and 64-bit SoCs rather
  than the usual mostly 64-bit changes.

  New SoCs:

   - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
     platform based on the older SAMA5 series.

   - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
     phone SoCs.

   - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
     SoCs.

  New boards:

   - Marvell CN913x reference boards

   - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
     and Fuji server boards.

   - Snapdragon 665 based Sony Xperia 10II

   - Snapdragon MSM8916 based Xiaomi Redmi 2

   - Snapdragon MSM8226 based Samsung Galaxy S3 Neo

   - NXP i.MX based 32-bit boards:
       - DHCOM based PicoITX
       - DHSOM based DRC0ỉ
       - SolidRun SolidSense
       - SKOV i.MX6 boards.

   - NXP i.MX based 64-bit boards:
       - Nitrogen8 SoM and MNT Reform2
       - LS1088A based Traverse Ten64
       - i.MX8M based GW7902.

   - NVIDIA Jetson TX2 NX Developer Kit

   - 4KOpen STiH418-b2264 development board

   - ux500 based Samsung phones: Gavini, Codina and Kyle

   - TI AM335x based Sancloud BBE Lite

   - ixp4xx dts files to replace all old board files

  Other changes:

   - Treewide fixes for dtc warnings

   - Rockchips i/o domain support

   - TI OMAP/AM3 CPSW switch driver support

   - Improved device support for allwinner, aspeed, qualcomm, NXP,
     nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
     OMAP and actions"

* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
  arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
  ARM: dts: rockchip: Add SFC to RV1108
  arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
  ARM: dts: aspeed: p10bmc: Add power control pins
  ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
  ARM: dts: aspeed: minipack: Update flash partition table
  dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
  dt-bindings: vendor-prefixes: add Traverse Technologies
  arm64: dts: add device tree for Traverse Ten64 (LS1088A)
  arm64: dts: ls1088a: add missing PMU node
  arm64: dts: ls1088a: add internal PCS for DPMAC1 node
  ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
  ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
  ARM: dts: add SKOV imx6q and imx6dl based boards
  dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
  dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
  arm64: dts: imx8mq-reform2: add sound support
  arm64: dts: imx8m: drop interrupt-affinity for pmu
  arm64: dts: imx8qxp: update pmu compatible
  arm64: dts: imx8mm: update pmu compatible
  ...
Merge branches 'clk-kirkwood', 'clk-imx', 'clk-doc', 'clk-zynq' and 'clk-ralink' into clk-next 2021-09-01T22:27:07+00:00 Stephen Boyd sboyd@kernel.org 2021-09-01T22:27:07+00:00 47505bf3a82166c3576155c229e941af922bf147 * clk-kirkwood: clk: kirkwood: Fix a clocking boot regression * clk-imx: clk: imx8mn: Add M7 core clock clk: imx8m: fix clock tree update of TF-A managed clocks clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate clk: imx8mn: use correct mux type for clkout path clk: imx8mm: use correct mux type for clkout path * clk-doc: dt-bindings: clock: samsung: fix header path in example MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings clk: zynqmp: fix kernel doc * clk-zynq: clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type * clk-ralink: clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates 
* clk-kirkwood:
  clk: kirkwood: Fix a clocking boot regression

* clk-imx:
  clk: imx8mn: Add M7 core clock
  clk: imx8m: fix clock tree update of TF-A managed clocks
  clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate
  clk: imx8mn: use correct mux type for clkout path
  clk: imx8mm: use correct mux type for clkout path

* clk-doc:
  dt-bindings: clock: samsung: fix header path in example
  MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
  dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos4 to dtschema
  dt-bindings: clock: samsung: convert Exynos3250 to dtschema
  dt-bindings: clock: samsung: convert Exynos542x to dtschema
  dt-bindings: clock: samsung: add bindings for Exynos external clock
  dt-bindings: clock: samsung: convert Exynos5250 to dtschema
  dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
  clk: zynqmp: Fix kernel-doc format
  clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings
  clk: zynqmp: fix kernel doc

* clk-zynq:
  clk: zynqmp: Fix a memory leak
  clk: zynqmp: Check the return type

* clk-ralink:
  clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
Merge branches 'clk-nvidia', 'clk-rockchip', 'clk-at91' and 'clk-vc5' into clk-next 2021-09-01T22:26:58+00:00 Stephen Boyd sboyd@kernel.org 2021-09-01T22:26:58+00:00 8fb59ce15c43d025dadc2df3d21590bd1e91eff0 - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators * clk-nvidia: clk: tegra: fix old-style declaration clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> * clk-rockchip: clk: rockchip: make rk3308 ddrphy4x clock critical clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema clk: rockchip: Add support for hclk_sfc on rk3036 clk: rockchip: rk3036: fix up the sclk_sfc parent error clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036 * clk-at91: clk: at91: clk-generated: Limit the requested rate to our range * clk-vc5: clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin 
 - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators

* clk-nvidia:
  clk: tegra: fix old-style declaration
  clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>

* clk-rockchip:
  clk: rockchip: make rk3308 ddrphy4x clock critical
  clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types
  dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema
  clk: rockchip: Add support for hclk_sfc on rk3036
  clk: rockchip: rk3036: fix up the sclk_sfc parent error
  clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036

* clk-at91:
  clk: at91: clk-generated: Limit the requested rate to our range

* clk-vc5:
  clk: vc5: Add properties for configuring SD/OE behavior
  clk: vc5: Use dev_err_probe
  dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2021-09-01T22:25:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-01T22:25:28+00:00 866147b8fa59530812fc769027a94468d89401e7 Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ... 
Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...
Merge branches 'clk-renesas', 'clk-cleanup' and 'clk-determine-divider' into clk-next 2021-09-01T22:25:15+00:00 Stephen Boyd sboyd@kernel.org 2021-09-01T22:25:15+00:00 7110569a096d820876f99543660741bd8a96af7c - Migrate some clk drivers to clk_divider_ops.determine_rate * clk-renesas: clk: renesas: Make CLK_R9A06G032 invisible clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2 dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock clk: renesas: r9a07g044: Add clock and reset entries for ADC clk: renesas: r9a07g044: Add clock and reset entries for CANFD clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch] clk: renesas: r9a07g044: Add GPIO clock and reset entries clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries clk: renesas: r9a07g044: Add USB clocks/resets clk: renesas: r9a07g044: Add DMAC clocks/resets clk: renesas: r9a07g044: Add I2C clocks/resets clk: renesas: r8a779a0: Add the DSI clocks clk: renesas: r8a779a0: Add the DU clock clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get() clk: renesas: rzg2l: Avoid mixing error pointers and NULL clk: renesas: rzg2l: Fix a double free on error clk: renesas: rzg2l: Fix return value and unused assignment clk: renesas: rzg2l: Remove unneeded semicolon * clk-cleanup: clk: palmas: Add a missing SPDX license header clk: Align provider-specific CLK_* bit definitions * clk-determine-divider: clk: stm32mp1: Switch to clk_divider.determine_rate clk: stm32h7: Switch to clk_divider.determine_rate clk: stm32f4: Switch to clk_divider.determine_rate clk: bcm2835: Switch to clk_divider.determine_rate clk: divider: Implement and wire up .determine_rate by default 
 - Migrate some clk drivers to clk_divider_ops.determine_rate

* clk-renesas:
  clk: renesas: Make CLK_R9A06G032 invisible
  clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
  dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
  clk: renesas: r9a07g044: Add clock and reset entries for ADC
  clk: renesas: r9a07g044: Add clock and reset entries for CANFD
  clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
  clk: renesas: r9a07g044: Add GPIO clock and reset entries
  clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
  clk: renesas: r9a07g044: Add USB clocks/resets
  clk: renesas: r9a07g044: Add DMAC clocks/resets
  clk: renesas: r9a07g044: Add I2C clocks/resets
  clk: renesas: r8a779a0: Add the DSI clocks
  clk: renesas: r8a779a0: Add the DU clock
  clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
  clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
  clk: renesas: rzg2l: Avoid mixing error pointers and NULL
  clk: renesas: rzg2l: Fix a double free on error
  clk: renesas: rzg2l: Fix return value and unused assignment
  clk: renesas: rzg2l: Remove unneeded semicolon

* clk-cleanup:
  clk: palmas: Add a missing SPDX license header
  clk: Align provider-specific CLK_* bit definitions

* clk-determine-divider:
  clk: stm32mp1: Switch to clk_divider.determine_rate
  clk: stm32h7: Switch to clk_divider.determine_rate
  clk: stm32f4: Switch to clk_divider.determine_rate
  clk: bcm2835: Switch to clk_divider.determine_rate
  clk: divider: Implement and wire up .determine_rate by default