linux.git/include/dt-bindings/power, branch v5.8 Linux kernel source tree Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2020-06-10T18:42:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-06-10T18:42:19+00:00 6f630784cc0d92fb58ea326e2bc01aa056279ecb Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ... 
Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...
Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and 'clk-silabs' into clk-next 2020-06-01T20:00:28+00:00 Stephen Boyd sboyd@kernel.org 2020-06-01T20:00:28+00:00 5debcd01e28f34f0c212ed8d60f257630bec0588 - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series 
 - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
 - Add support for X1830 and X1000 Ingenic SoC clk controllers
 - Add support for Qualcomm's MSM8939 Generic Clock Controller
 - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
 - Enable supply regulators for GPU gdscs on Qualcomm SoCs
 - Add support for Si5342, Si5344 and Si5345 chips

* clk-mmp:
  clk: mmp2: Add audio clock controller driver
  dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding
  clk: mmp2: Add support for power islands
  dt-bindings: marvell,mmp2: Add ids for the power domains
  dt-bindings: clock: Make marvell,mmp2-clock a power controller
  clk: mmp2: Add the audio clock
  clk: mmp2: Add the I2S clocks
  clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init()
  clk: mmp2: Move thermal register defines up a bit
  dt-bindings: marvell,mmp2: Add clock id for the Audio clock
  dt-bindings: marvell,mmp2: Add clock id for the I2S clocks
  clk: mmp: frac: Allow setting bits other than the numerator/denominator
  clk: mmp: frac: Do not lose last 4 digits of precision

* clk-intel:
  clk: intel: remove redundant initialization of variable rate64
  clk: intel: Add CGU clock driver for a new SoC
  dt-bindings: clk: intel: Add bindings document & header file for CGU

* clk-ingenic:
  clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused
  clk: X1000: Add FIXDIV for SSI clock of X1000.
  dt-bindings: clock: Add and reorder ABI for X1000.
  clk: Ingenic: Add CGU driver for X1830.
  dt-bindings: clock: Add X1830 clock bindings.
  clk: Ingenic: Adjust cgu code to make it compatible with X1830.
  clk: Ingenic: Remove unnecessary spinlock when reading registers.

* clk-qcom:
  clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src
  dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
  clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller
  clk: qcom: gcc: Add support for Secure control source clock
  dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID
  clk: qcom: gcc: Add support for a new frequency for SC7180
  clk: qcom: Add DT bindings for MSM8939 GCC
  clk: qcom: gcc: Add missing UFS clocks for SM8150
  clk: qcom: gcc: Add GPU and NPU clocks for SM8150
  clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc
  clk: qcom: gdsc: Handle GDSC regulator supplies
  clk: qcom: msm8916: Fix the address location of pll->config_reg

* clk-silabs:
  clk: clk-si5341: Add support for the Si5345 series
dt-bindings: marvell,mmp2: Add ids for the power domains 2020-05-28T00:55:12+00:00 Lubomir Rintel lkundrak@v3.sk 2020-05-19T22:41:48+00:00 17d43046fd4c939448576480f02423686524adb0 On MMP2 the audio and GPU blocks are on separate power islands. On MMP3 the camera block's power is also controlled separately. Add the numbers that we could use to refer to the power domains for respective power islands from the device tree. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200519224151.2074597-11-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
On MMP2 the audio and GPU blocks are on separate power islands. On MMP3
the camera block's power is also controlled separately.

Add the numbers that we could use to refer to the power domains for
respective power islands from the device tree.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200519224151.2074597-11-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers 2020-05-25T21:19:06+00:00 Arnd Bergmann arnd@arndb.de 2020-05-25T21:19:05+00:00 502afe7f0432248c9ee18263f404cf491d91f604 Qualcomm driver updates for v5.8 This contains a large set of cleanups, bug fixes, general improvements and documentation fixes for the RPMH driver. It adds a debugfs mechanism for inspecting Command DB. Socinfo got the "soc_id" attribute defines and definitions for a various variants of MSM8939. RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH had to be reverted due to a compilation issue when tracing is enabled. RPMHPD gained power-domains for the SM8250 voltage corners. The SCM driver gained fixes for two build warnings and the SMP2P had an unnecessary error print removed. * tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits) Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module" soc: qcom: rpmh-rsc: Remove the pm_lock soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock kernel/cpu_pm: Fix uninitted local in cpu_pm soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications firmware: qcom_scm-legacy: Replace zero-length array with flexible-array soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync() soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids soc: qcom: aoss: Add SM8250 compatible soc: qcom: pdr: Remove impossible error condition soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner soc: qcom: rpmhpd: Add SM8250 power domains firmware: qcom_scm: fix bogous abuse of dma-direct internals dt-bindings: soc: qcom: apr: Use generic node names for APR services firmware: qcom_scm: Remove unneeded conversion to bool soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs soc: qcom: cmd-db: Use 5 digits for printing address soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning ... Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Qualcomm driver updates for v5.8

This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.

RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.

RPMHPD gained power-domains for the SM8250 voltage corners.

The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.

* tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits)
  Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
  soc: qcom: rpmh-rsc: Remove the pm_lock
  soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock
  kernel/cpu_pm: Fix uninitted local in cpu_pm
  soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD
  soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications
  firmware: qcom_scm-legacy: Replace zero-length array with flexible-array
  soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()
  soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation
  soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids
  soc: qcom: aoss: Add SM8250 compatible
  soc: qcom: pdr: Remove impossible error condition
  soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
  soc: qcom: rpmhpd: Add SM8250 power domains
  firmware: qcom_scm: fix bogous abuse of dma-direct internals
  dt-bindings: soc: qcom: apr: Use generic node names for APR services
  firmware: qcom_scm: Remove unneeded conversion to bool
  soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs
  soc: qcom: cmd-db: Use 5 digits for printing address
  soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning
  ...

Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers 2020-05-25T14:58:09+00:00 Arnd Bergmann arnd@arndb.de 2020-05-25T14:57:24+00:00 93f9fb1e4a7eb03e6c163b874a22d3db9569b64f soc: amlogic: driver updates for v5.8 - support GX SoCs in the EE power-controller driver * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2 dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCs dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2 Link: https://lore.kernel.org/r/5ec6f570.1c69fb81.a3753.711b@mx.google.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
soc: amlogic: driver updates for v5.8
- support GX SoCs in the EE power-controller driver

* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs
  soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2
  dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCs
  dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2

Link: https://lore.kernel.org/r/5ec6f570.1c69fb81.a3753.711b@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCs 2020-05-19T23:02:14+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2020-05-15T20:47:07+00:00 cc9ca02a40e549402eebdf151a8f0ca5027e0f7c The power domains on the GX SoCs are very similar to G12A. The only known differences so far are: - The GX SoCs do not have the HHI_VPU_MEM_PD_REG2 register (for the VPU power-domain) - The GX SoCs have an additional reset line called "dvin" Add a new compatible string and adjust the reset line expectations for these SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200515204709.1505498-3-martin.blumenstingl@googlemail.com 
The power domains on the GX SoCs are very similar to G12A. The only
known differences so far are:
- The GX SoCs do not have the HHI_VPU_MEM_PD_REG2 register (for the
  VPU power-domain)
- The GX SoCs have an additional reset line called "dvin"

Add a new compatible string and adjust the reset line expectations for
these SoCs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200515204709.1505498-3-martin.blumenstingl@googlemail.com
dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2 2020-05-19T23:02:14+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2020-05-15T20:47:06+00:00 18dfc0bf8167fb0dc729da4a6a816e34d754318b The power domains on the 32-bit Meson8/Meson8b/Meson8m2 SoCs are very similar to what G12A still uses. The (known) differences are: - Meson8 doesn't use any reset lines at all - Meson8b and Meson8m2 use the same reset lines, which are different from what the 64-bit SoCs use - there is no "vapb" clock on the older SoCs - amlogic,ao-sysctrl cannot point to the whole AO sysctrl region but only the power management related registers Add a new compatible string and adjust clock and reset line expectations for each SoC. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200515204709.1505498-2-martin.blumenstingl@googlemail.com 
The power domains on the 32-bit Meson8/Meson8b/Meson8m2 SoCs are very
similar to what G12A still uses. The (known) differences are:
- Meson8 doesn't use any reset lines at all
- Meson8b and Meson8m2 use the same reset lines, which are different
  from what the 64-bit SoCs use
- there is no "vapb" clock on the older SoCs
- amlogic,ao-sysctrl cannot point to the whole AO sysctrl region but
  only the power management related registers

Add a new compatible string and adjust clock and reset line expectations
for each SoC.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200515204709.1505498-2-martin.blumenstingl@googlemail.com
dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros 2020-04-28T07:54:12+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2020-04-23T21:40:42+00:00 58f7381c97547db025970423bd2a3b9d9cea1174 Add power domain indices for RZ/G1H (R8A7742) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
Add power domain indices for RZ/G1H (R8A7742) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1587678050-23468-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
soc: qcom: rpmhpd: Add SM8250 power domains 2020-04-21T06:31:48+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2020-04-15T06:21:53+00:00 64016bb88e8519d0f8512b9861837779c1239c0d Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200415062154.741179-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200415062154.741179-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
dt-bindings: power: add Amlogic secure power domains bindings 2020-02-14T19:37:34+00:00 Jianxin Pan jianxin.pan@amlogic.com 2020-01-15T11:30:29+00:00 165b5fb294e878f00015b7beb91cb00e36e4f8b8 Add the bindings for the Amlogic Secure power domains, controlling the secure power domains. The bindings targets the Amlogic A1 and C1 compatible SoCs, in which the power domain registers are in secure world. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1579087831-94965-3-git-send-email-jianxin.pan@amlogic.com 
Add the bindings for the Amlogic Secure power domains, controlling the
secure power domains.

The bindings targets the Amlogic A1 and C1 compatible SoCs, in which the
power domain registers are in secure world.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1579087831-94965-3-git-send-email-jianxin.pan@amlogic.com