linux.git/include/dt-bindings/mfd, branch v4.13

dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file

2017-03-23T17:18:36+00:00

This patch lists STM32F7's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Gabriel Fernandez 
Acked-by: Lee Jones 
Signed-off-by: Alexandre TORGUE

Merge tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

2017-02-07T14:25:19+00:00

Pull "STM32 DT updates for v4.11, round 2" from Alexandre Torgue:

Highlights:
----------

 - ADD Timers support on STM32F429 MCU
 - Enable PWM1 & PWM3 on STM32F469 Disco board
 - Fix STM32F4_X_CLOCK macro
 - Use STM32F4_X_CLOCK macro in STM32 device tree
 - Add I2C1 support for STM32F429 MCU
 - Enable I2C1 on STM32F429 eval board

* tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU

dt-bindings: mfd: stm32f4: Add missing binding definition

2017-02-01T16:01:36+00:00

This patch adds missing binding definition (backupram, ethernet, otg,
qspi, adc & dsi)

Acked-by: Lee Jones 
Signed-off-by: Gabriel Fernandez 
Signed-off-by: Alexandre TORGUE

dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro

2017-02-01T16:01:33+00:00

Macro to select a clock was not correct.

Offset of enable register starts at 0x30, then calculation to select a bit is:
(@enable_reg - 0x30) / 4 * 32 + bit_to_select

Tested-by: M'boumba Cedric Madianga 
Acked-by: Stephen Boyd 
Acked-by: Lee Jones 
Signed-off-by: Gabriel Fernandez 
Signed-off-by: Alexandre TORGUE

dt-bindings: mfd: Remove TPS65217 interrupts

2016-12-27T18:06:00+00:00

Interrupt numbers are from the datasheet, so no need to keep them in
the ABI. Use the number in the DT file.

Signed-off-by: Milo Kim 
Acked-by: Rob Herring 
Signed-off-by: Tony Lindgren

dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts

2016-11-09T21:31:43+00:00

TPS65217 supports three interrupt sources. This patch enables assigning
each IRQ number in the charger and power button node. Then corresponding
IRQ will be requested by each driver.

Signed-off-by: Milo Kim 
Signed-off-by: Tony Lindgren

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-10-08T04:23:40+00:00

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...

mfd: qcom-rpm: Add support for pm8018 RPM Regulator

2016-08-31T08:33:43+00:00

In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.

Signed-off-by: Neil Armstrong 
Acked-by: Bjorn Andersson 
Signed-off-by: Lee Jones

dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include file

2016-08-24T13:21:26+00:00

Ths patch lists STM32F4's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Maxime Coquelin 
Signed-off-by: Gabriel Fernandez 
Signed-off-by: Philipp Zabel

mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024

2016-05-09T14:42:08+00:00

The MAXIM PMIC MAX77620 and MAX20024 are power management IC
which supports RTC, GPIO, DCDC/LDO regulators, interrupt,
watchdog etc.

Add DT binding document for the different functionality of
this device.

Signed-off-by: Laxman Dewangan 
Acked-by: Rob Herring 
Signed-off-by: Lee Jones