Some i2c fixes over DisplayPort. * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: Improve vramlimit module param documentation drm/radeon: fix audio pin counts for DCE6+ (v2) drm/radeon/dp: switch to the common i2c over aux code drm/dp/i2c: Update comments about common i2c over dp assumptions (v3) drm/dp/i2c: send bare addresses to properly reset i2c connections (v4) drm/radeon/dp: handle zero sized i2c over aux transactions (v2) drm/i915: support address only i2c-over-aux transactions drm/tegra: dp: Support address-only I2C-over-AUX transactions
This is leftover stuff from my previous doc round which I kinda wanted to do but didn't yet due to rebase hell. The modeset helpers and the probing helpers a independent and e.g. i915 uses the probing stuff but has its own modeset infrastructure. It hence makes to split this up. While at it add a DOC: comment for the probing libraray. It would be rather neat to pull some of the DocBook documenting these two helpers into in-line DOC: comments. But unfortunately kerneldoc doesn't support markdown or something similar to make nice-looking documentation, so the current state is better. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Pullx86 core platform updates from Peter Anvin: "This is the x86/platform branch with the objectionable IOSF patches removed. What is left is proper memory handling for Intel GPUs, and a change to the Calgary IOMMU code which will be required to make kexec work sanely on those platforms after some upcoming kexec changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, calgary: Use 8M TCE table size by default x86/gpu: Print the Intel graphics stolen memory range x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms x86/gpu: Add vfunc for Intel graphics stolen memory base address
Pull drm updates from Dave Airlie:
"Highlights:
- drm:
Generic display port aux features, primary plane support, drm
master management fixes, logging cleanups, enforced locking checks
(instead of docs), documentation improvements, minor number
handling cleanup, pseudofs for shared inodes.
- ttm:
add ability to allocate from both ends
- i915:
broadwell features, power domain and runtime pm, per-process
address space infrastructure (not enabled)
- msm:
power management, hdmi audio support
- nouveau:
ongoing GPU fault recovery, initial maxwell support, random fixes
- exynos:
refactored driver to clean up a lot of abstraction, DP support
moved into drm, LVDS bridge support added, parallel panel support
- gma500:
SGX MMU support, SGX irq handling, asle irq work fixes
- radeon:
video engine bringup, ring handling fixes, use dp aux helpers
- vmwgfx:
add rendernode support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
DRM: armada: fix corruption while loading cursors
drm/dp_helper: don't return EPROTO for defers (v2)
drm/bridge: export ptn3460_init function
drm/exynos: remove MODULE_DEVICE_TABLE definitions
ARM: dts: exynos4412-trats2: enable exynos/fimd node
ARM: dts: exynos4210-trats: enable exynos/fimd node
ARM: dts: exynos4412-trats2: add panel node
ARM: dts: exynos4210-trats: add panel node
ARM: dts: exynos4: add MIPI DSI Master node
drm/panel: add S6E8AA0 driver
ARM: dts: exynos4210-universal_c210: add proper panel node
drm/panel: add ld9040 driver
panel/ld9040: add DT bindings
panel/s6e8aa0: add DT bindings
drm/exynos: add DSIM driver
exynos/dsim: add DT bindings
drm/exynos: disallow fbdev initialization if no device is connected
drm/mipi_dsi: create dsi devices only for nodes with reg property
drm/mipi_dsi: add flags to DSI messages
Skip intel_crt_init for Dell XPS 8700
...
If you are using the common dp over i2c functionality, it is asumed that the aux transfer function does not modify the any of the msg structure other than the reply field. Doing so breaks the logic in the common code. v2: update struct drm_dp_aux comments about assumptions v3 (chk): rebased on upstream changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Christian König <christian.koenig@amd.com>
Summaries: - Add MIPI-DSI Driver, and dt bindigs - Add S6E8AA0 MIPI-DSI based panel drivers, and dt bindings - Add LD9040 parallel panel driver . this driver is placed in drivers/gpu/drm/panel, and it seems to be used for exynos drm as of now, - Some fixups Changelog v2: - Remove super device support, and relevant dt bindings for more reviews. - Fix module build errors you pointed out. - Re-based it to drm-next again. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages
Pull request of 2014-04-04 Currently only a single patch fixing up mixed use of the ttm_bo_reserve and ww_mutex APIs * tag 'ttm-next-2014-04-04' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Hide the implementation details of reservation
This patch adds flags field to mipi_dsi_msg structure and two flags: - MIPI_DSI_MSG_REQ_ACK - request ACK from peripheral for given message, - MIPI_DSI_MSG_USE_LPM - use Low Power Mode to transmit message. The first flag is usually helpful during DSI diagnostic, the second flag is required by some peripherals during configuration phase. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
The following error and warnings will be seen when compiling a C file which includes <drm/drm_gem_cma_helper.h> but without <drm/drmP.h> being included before. include/drm/drm_gem_cma_helper.h:5:24: error: field ‘base’ has incomplete type include/drm/drm_gem_cma_helper.h: In function ‘to_drm_gem_cma_obj’: include/drm/drm_gem_cma_helper.h:16:9: warning: initialization from incompatible pointer type [enabled by default] include/drm/drm_gem_cma_helper.h: At top level: include/drm/drm_gem_cma_helper.h:24:34: warning: ‘struct drm_mode_create_dumb’ declared inside parameter list [enabled by default] include/drm/drm_gem_cma_helper.h:24:34: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/drm/drm_gem_cma_helper.h:24:34: warning: ‘struct drm_device’ declared inside parameter list [enabled by default] include/drm/drm_gem_cma_helper.h:24:34: warning: ‘struct drm_file’ declared inside parameter list [enabled by default] include/drm/drm_gem_cma_helper.h:28:10: warning: ‘struct drm_device’ declared inside parameter list [enabled by default] include/drm/drm_gem_cma_helper.h:28:10: warning: ‘struct drm_file’ declared inside parameter list [enabled by default] include/drm/drm_gem_cma_helper.h:35:3: warning: ‘struct drm_device’ declared inside parameter list [enabled by default] include/drm/drm_gem_cma_helper.h:46:14: warning: ‘struct drm_device’ declared inside parameter list [enabled by default] Fix them by including <drm/drmP.h> in drm_gem_cma_helper.h. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Dave Airlie <airlied@redhat.com>